Furniture of America CM-BK613 User manual

1. Insert 2 barrel nuts (#D) into
each end along the side rails
(#4,5), then align those side
rails to the headboards (#1,2).
2. Insert 2 bolts (#A)
into each end along
the headboards
(#1,2). Make sure
to insert those bolts
into the barrel nuts.
Secure using the
Allen wrench (#I).
3. Insert 2 wood dowels (#E) into each end of
the bookcases (#3), then align to the holes
along the headboards (#1,2). Insert the bolts
(#B) into each end. Secure using the Allen wrench.
1. Insert 2 wood dowels (#E) into each end of
the ladder rungs (#9-13), then align to the holes
along the headboards (#1,2). Insert the screws
(#C) into each hole. Secure using the Allen wrench.
#A
3. Insert 2 wood dowels (#E) into each end of the
front guardrails (#8), then align and insert into
the holes along the headboard (#2) and ladder
rail (#7). Insert the bolts (#A) into each end into
the nuts (#D). Secure using the Allen wrench.
2. Insert a barrel nut (#D) into the holes
along the sides of the guardrails (#8).

1. Align the support legs (#6) to the designated holes, then
insert 2 bolts (#F) into the top holes and 2 bolts (#B) into
the bottom holes. Secure using the Allen wrench (#I).
2. Insert a bolt (#B)
and secure using
the Allen wrench.
Align the connection irons (#H) to the holes
along the ends of the back guardrail (#14),
then insert a screw (#G) into each. Then secure.

Align those connection irons (#H) to
the holes along the inner sides, then
insert a screw (#G) into each. Secure.
Align the back guardrail (#14) to the holes along the support legs (#6),
then insert a screw (#F) into each hole. Secure using a screwdriver.

Carefully place the twin slat kits (#15) onto the side rails, then
insert a screw (#F) into each hole. Secure using a screwdriver.
ASSEMBLY IS COMPLETED