Furniture of America CM-BK635 User manual

MODEL #
CM-BK635
1 / 12
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
DIFFICULTEASY
3 - People
(Included)
Phillips
Screwdriver
(Not Included)
Allen Wrench
Recommended
VERSION # 20-03-28

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX12

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX12

4 / XXXXXXX12

Lower Front Side Rail Upper Front Side Rail
Upper Back Side Rail
Lower End Guardrail
Upper End Guardrail Upper End Guardrail
Front Guardrail
Back Guardrail
Ladder Rail (Left) Ladder Rung
Twin Slat Kit(13pcs) Guardrail Support
Ladder Rail (Right)
Lower Back Side Rail
Lower End Guardrail
BUNKBED
CM-BK635
#1 1pc
#5 1pc #6 1pc
5 / 12
#10 2pcs #11 2 set
#13 1pc
#2 1pc #3 1pc #4 1pc
#12 3pcs
#14 1pc
#7 1pc #8 1pc
#15 4pcs
#9 2pcs

#2
Bolt Ø1/4" x 3-3/8" Nut Ø1/4"
Allen Wrench 4mm
#1 #6
#5
#3
#4
#7
#8
#9
#10
#12
#12
#13
#14
#15
#11
Screw Ø1/4" x 3-1/8"
Bolt Ø1/4" x 1-5/8"
Wood Dowel
Ø10 x 40mm
Bolt Ø1/4" x 1-1/4"
#11
#G 4pcs #H 12pcs
#I 52pcs #J 1pc
6 / 12
#A 16pcs #B 6pcs #C 9pcs #D 16pcs
#E 8pcs #F 6pcs
#11
Screw #4 x 35mm
Screw Ø1/4" x 2" Metal Dowel Ø9 x 3-1/2"

#5
#6
#7
#8
#9
#10
#12
#13
#14
Carton Disignation Part Hardware
CM-BK635-1
#1
CM-BK635-3
#2
#3
#4
#15
CM-BK635-2
CM-BK635-3
Upper End Guardrail
Upper End Guardrail
Lower End Guardrail
Lower End Guardrail
Lower Front Side Rail
Lower Back Side Rail
Upper Front Side Rail
Upper Back Side Rail
Back Guardrail
Front Guardrail
Guardrail Support
Ladder Rail (Left)
Ladder Rail (Right)
Ladder Rung
#G x 4pcs
#H x 12pcs
#I x 52pcs
#J x 1pc
#A x 16pcs
#B x 6pcs
#C x 9pcs
#D x 16pcs
#E x 8pcs
#F x 6pcs
#11
Twin Slat Kit(13pcs)
CM-BK635 is packed in 3 cases
7 / 12

#3
#1
#2
#6
#7
#8
#9
#10
#5
#J
#A
#D
#J
#A
#D
#J
#H
#D
#F
#4
#A
#J
ASSEMBLY INSTRUCTIONS
8 / 12
1
2
Part #3 x1pc
Hardware #A x8pcs
Hardware #D x8pcs
Part #4 x1pc
Part #5 x1pc
Part #6 x1pc
Part #7 x1pc
Hardware #A x8pcs
Hardware #D x8pcs
Part #8 x1pc
Part #9 x2pcs
Part #10 x2pcs
Hardware #F x6pcs
Hardware #H x12pcs
Part #1 x1pc
Part #2 x1pc
Insert nuts (#D) to the side holes of
the lower side rails (#5,6). Align
lower side rails (#5,6) to the holes
of the lower guardrails (#3,4), then
secure by tightening bolts (#A) onto
nuts (#D).
1) Insert dowels (#H) to guardrails (#9,10), then insert
nuts (#D) to upper side rails (#7,8).
2) Align guardrails(#9,10) and upper side rails (#7,8) to the
upper end guardrails (#1,2), then secure with screws (#F)
and bolts (#A).

#G
#G
#G
#G
#12
#12
#12
#7
#8
#10
#9
#1
#3
#4
#2
#J
#C
ASSEMBLY INSTRUCTIONS
3
4
9 / 12
Hardware #C x9pcs
Part #12 x3pcs
Hardware #G x4pcs
Align guardrail supports (#12) to
the guardrails, then secure by
using screws (#C).
Place metal dowels (#G)
onto the holes on top of
lower end guardrails (#3,4),
then carefully align upper
end guardrails (#1,2) to
lower end guardrails (#3,4).

#E #J
#J
#E
#I
#I
#11
#11
#13
#14
#15
#5
#6
#7
#8
ASSEMBLY INSTRUCTIONS
10 / 12
5
6
Hardware #E x8pcs
Part #13 x1pc
Part #14 x1pc
Part #15 x4pcs
Hardware #I x52pcs
Part #11 x2set
Align ladder rungs (#15) to the ladder rails (#13,14),
then secure by using screws (#E).
Align slat kits (#11) to the bunk beds, then secure by using
screws (#I).