Furniture of America CM7083Q User manual

1. Prepare 4 bolt assemblies by first inserting a
lock washer (#C) onto the bolt (#A) then a
flat washer (#B) onto that same bolt (#A).
2. Align the legs (#2) to the holes along the
sides of the headboard (#1), then insert the
bolt assemblies. Secure using the Allen wrench.
1. Prepare 4 bolt assemblies by first inserting a
lock washer (#C) onto the bolt (#A) then a
flat washer (#B) onto that same bolt (#A).
2. Align the legs (#4) to the holes along the
sides of the footboard (#3), then insert the
bolt assemblies. Secure using the Allen wrench.

Hook each end of the side rails (#5) onto
the slots along the sides of the legs (#2,4).
Insert the threaded ends of the slat
support legs (#7) into the holes along
the slats (#6), turn right to tighten.
Adjust according to
the ground level.

Place the slats (#6) onto the
side rails (#5), then insert a
screw (#D) into each end.
Secure using a screwdriver.

1. Prepare 4 bolt assemblies by first inserting a
lock washer (#C) onto the bolt (#A) then a
flat washer (#B) onto that same bolt (#A).
2. Align the legs (#2) to the holes along the
sides of the headboard (#1), then insert the
bolt assemblies. Secure using the Allen wrench.
1. Prepare 4 bolt assemblies by first inserting a
lock washer (#C) onto the bolt (#A) then a
flat washer (#B) onto that same bolt (#A).
2. Align the legs (#4) to the holes along the
sides of the footboard (#3), then insert the
bolt assemblies. Secure using the Allen wrench.