Furniture of America Gallagher CM2675 User manual

The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
ASSEMBLY RATING
EASY DIFFICULT
1 / 7
(Not Included)
Philips
Screwdriver
TOOLS REQUIRED
2 - Persons
Recommended
Furniture of America MODEL #
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PST)
Questions?
CM2675
VERSION # 19-07-23

2 / 7
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING

PRE ASSEMBLY
INTRODUCTION
3 / 7
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.

4 / 7

5 / 7
PARTS
HARDWARE
Please keep instructions for
future reference.
Check the quantity and
irregularity of parts and
hardware before you start.
CM2675
SO F A
#1 1pc
Bolt 1/4”x1”
#A 4pcs
Futon Front Leg
#2 2pcs #3 2pcs
Rear Leg
Power Adapter
#4 1pc
Allen Wrench
#B 1pc #C 20pcs
Screw

6 / 7
1
2
Part #1 x 1pc
With the help of another person, carefully place the futon (#1)
facing down on a protective surface. Remove the 2 front legs (#2)
and the 2 rear legs (#3) located inside the futon (#1).
Part #3 x 2pcs
Hardware #A x 4pcs
Part #2 x 2pcs
Hardware #C x 20pcs

7 / 7
3
4
Carefully turn the futon upright. Make sure the futon is rested on a
flat surface and does not feel loose or wobbly. If it does, double
check that the bolts/screws are secured and properly tightened.
#4
To supply power to the unit, plug the barrel pin connector of
the power adapter (#4) to the connection port of the futon
and the metal prongs of the power adapter (#4) into the AC
wall outlet.