Furniture of America CM7317D User manual

1 / 15
MODEL #
CM7317D
Questions?
GIVE US A CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PT)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - People
(Included)
Allen Wrench
Recommended
Phillips
Screwdriver
(Not Included)
VERSION # 2022-04-14

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 15

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
scratches and damages.
3 / 15

4 / 15

DRESSER
CM7317D
5 / 15
#1 1pc #2 1pc
Right Side
Panel
#3 1pc
Top Panel
Left Side
Panel
#4 1pc
Top Back
Panel
#5 1pc
Bottom
Panel
#6 6pcs
Drawer
Front Panel
#8 6pcs
Drawer
Back Panel
#10 6pcs
Drawer Right
Side Panel
Drawer
Bottom Panel
#11 5pcs
Legs
#12 4pcs
Divider
Panel
#9 6pcs
#13 1pc
Center Panel
Drawer Left
Side Panel
#7 6pcs
#14 1pc
Bottom Back
Panel

#A 6pcs
Handle
#D 46pcs
#B 12pcs
Handle Screw
Ø5/32" x 7/8"
#C 6pcs
Wood Dowels
Ø8 x 30mm
#E 1pc
Allen Wrench M4
Bolt Ø1/4" x 1" Tipping Restraint
Hardware Kit
#F 1pc
Exploded View
#6
#7
#8
#9
#10
#1
#2
#3
#5
#11
#4
#14
#12
#12
#13
6 / 15
x 6

ASSEMBLY INSTRUCTIONS
1
7 / 15
Part #3 x1pc
2
Part #13 x1pc
#12
#3
Part #12 x2pcs
#13
#12
Align and attach Divider panels
(#12) to Right side panel (#3) and
lock into place.
Align and attach Center Panel
(#13) to the Divider panels (#12)
and lock into place.

ASSEMBLY INSTRUCTIONS
8 / 15
3
4
Part #2 x1pc
#13
#12
Part #12 x2pcs
#2
#12
Align and attach Divider panel
(#12) to the other side of center
panel (#13) and lock into place.
Align and attach Left side panel (#2)
to the Divider panel (#12) and lock
into place.

ASSEMBLY INSTRUCTIONS
5
Hardware #C x 6pcs
6
Part #11 x 5pcs
9 / 15
#2
#3
#13
#C
#11
#5
Part #5 x 1pc
Attach wooden dowels (#C) to L/R
side panels (#2, #3) and center
divider panel (#13).
Attach legs (#11) to the
Bottom Panel (#5).

ASSEMBLY INSTRUCTIONS
7
8
10 / 15
Part #1 x1pc
#5 #3
#2
#13
#1
Align and attach
Bottom board (#5) to
the L/R side panels
(#2,3) and Center
panel (#13).
Attach Top panel (#1) onto L/R side
panels (#2,3). Lock into place.

ASSEMBLY INSTRUCTIONS
9
10
11 / 15
Hardware #D x2pcs
#4
#14
#E
#D
#E
#D
Part #14 x 1pc
Part #4 x 1pc
Hardware #D x 20pcs
Align Top and Bottom back
panels (#4,14) and secure
using Bolts (#D).
Secure Bottom panel (#5)
by using Bolts (#D).

ASSEMBLY INSTRUCTIONS
11
12 / 15
12
#6
#E
#D
Part #6 x1pc
Part #7 x1pc
Part #8 x1pc
x 6
#7
#8
Part #10 x 1pc
Part #9 x 1pc
Hardware #D x 4pcs
#9
#10
x 6
Attach Drawer L/R Panels (#7,
#8) to the Drawer front panel
(#6).
Insert Drawer bottom panel (#9).
Then align Drawer back panel (#10)
and secure using Bolts (#D).

ASSEMBLY INSTRUCTIONS
13
13 / 15
14
#B
Hardware #A x 1pc
Hardware #B x 2pcs
#A x 6
Align and attach Handles (#A)
with screw (#B) .
Insert drawers. Note: Press
down release tab to insert rail
completely into side glides.

ASSEMBLY INSTRUCTIONS
15
14 / 15
Hardware #F x 1pc
WALL
#F

L
15/ 15