Furniture of America Haleigh CM3491RT User manual

The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
ASSEMBLY RATING
EASY DIFFICULT
1 / 9
TOOLS REQUIRED
2 - People
Recommended
MODEL #
CM3491RT
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PST)
Questions?
VERSION # 21-01-26

2 / 9
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING

PRE ASSEMBLY
INTRODUCTION
3 / 9
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.

4 / 9

ROUND DINING TABLE
CM3491RT
#1 1pc
Table Top Mounting Plate
#2 1pc #3 1pc
Mounting Disc
#A 12pcs
M6 x 35MM Bolt
#D 20pcs
5 / 9
M4 Allen Wrench
#B 8pcs
#E 4pcs
M6 Adjuster
Base Leg
#C 20pcs
M6 x 13MM
Spring Washer
M6 x 19MM
Flat Washer
#F 1pc
#4 4pcs
Table Leg
M6 x 45MM Bolt

CM3491RT is packed in 2 cases
Carton
CM3491RT - 1
Designation
Table Top
Mounting Plate
Mounting Disc
Table Leg
Part Hardware
CM3491RT - 2
# 1
# 2
# 3
# 4
#A x 12pcs
#B x 8pcs
#C x 20pcs
#D x 20pcs
#E x 4pcs
#F x 1pc
6 / 9
x 4

ASSEMBLY INSTRUCTIONS
1
2
Part #3 x1pc
Part #4 x4pcs
Hardware #B x8pcs
Hardware #C x8pcs
Part #1 x1pc
7 / 9
Hardware #D x8pcs
Hardware #F x1pc
Hardware #F x1pc
DO NOT TIGHTEN
ALL BOLTS UNITL
STEP 4 IS DONE
REMOVE
&
DISCARD
Part #2 x1pc
#F
#B
#C
#D #4
#3 #4
#4
#4
#2
#1
#F
Align mounting discs (#3) to
the legs (#4), then secure
by using bolts (#B) with
washers (#C,D).
Remove mounting plate (#2) from the
table top (#1).

ASSEMBLY INSTRUCTIONS
3
4
8 / 9
Part #1 x1pc
Hardware #A x4pcs
Hardware #C x4pcs
Hardware #D x4pcs
Hardware #E x4pcs
Hardware #F x1pc
Part #2 x1pc
Hardware #A x8pcs
Hardware #C x8pcs
Hardware #D x8pcs
Hardware #F x1pc
TIGHTEN THESE
BOLTS MENTIONED
IN STEP 1
#F
#B
#C
#D
#2
#E
#1
#F
#A
#C
#D
Align mounting plate (#2) to the
legs, then secure by using bolts
(#B) with washers (#C,D).
Align mounting plate to the table top
(#1), then secure by using bolts (#A)
with washers (#C,D).

ASSEMBLY INSTRUCTIONS
5
9 / 9