Furniture of America CM-DK828 User manual

1 / 12
MODEL #
CM-DK828
Questions?
GIVE US A CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PT)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION # 21-09-13
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 12

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
scratches and damages.
3 / 12

4 / 12

DESK
CM-DK828
5 / 12
#1 1pc #2 1pc #3 1pc
Table Top Left Side Frame Right Side Frame
#4 1pc
Cross Bar
#5 1pc
Upper Support Bar
#6 1pc
Lower Support Bar
#7 2pcs
Tension Bars
#C 1pc
Hex Nut
#B 4pcs
Bolts Ø1/4" x 1-1/4"
#A 19pcs
Bolts Ø1/4" x 1/2"
#D 1pc
Allen Wrench 4mm
#E 1pc
Wrench 14mm
#F 2sets
Anti-Tip Kits
#G 1pc
USB Port
#H 2pcs
Screws Ø3.5 x 15mm

6 / 12
Exploded View
#1
#2
#3
#5
#4
#6
#7

1
2
7 / 12
ASSEMBLY INSTRUCTIONS
Part #7 x2pcs
Hardware #A x1pc
Hardware #C x1pc
#7
#D
#A
#C #E
Part #2 x1pc
Part #3 x1pc
Part #4 x1pc
Hardware #A x4pcs
#2
#3
#4
#D
#A
#A
Align tension bars (#7) together and
secure by using bolts (#A) onto nuts
(#C). Do not fully tighten.
Align crossbar (#4) to the side
frames (#2,3), then secure by
using bolts (#A).

3
4
8 / 12
ASSEMBLY INSTRUCTIONS
#2
#4
#5
#3
#6
#D
#A
#D
#A
Part
Part #5 x1pc
#6 x1pc
Hardware #A x6pcs
#1
#D
#D
#B
#A
#4
#5
Hardware #A x4pcs
Hardware #B x4pcs
Part #1 x1pc
Align support bars (#5,6) to the
frames (#2,3), then secure by using
bolts (#A).
Align frame to the top (#1), then
secure by using bolts (#A,B).

5
6
9 / 12
ASSEMBLY INSTRUCTIONS
#1
#7
#2
#3
#D
#A
Part #7 x2pcs
Hardware #A x4pcs
#1
#G
#H
Hardware #G x1pc
Hardware #H x2pcs
Align bars (#7) to the frame, then
secure by using bolts (#A).
Tighten bolt on the bars (#7).
Align USB port (#G) to the top (#1), then
secure by using screws (#H).

7
8
10 / 12
ASSEMBLY INSTRUCTIONS
Align and hook the hinges together to lock the table.
Unhook to unlock the table.

9
11 / 12
ASSEMBLY INSTRUCTIONS
Hardware #F x2sets
#D
#A
#F
WALL
Levelers can be used for
adjustment if needed.
NOTE:

L
12/ 12