Furniture of America Manvel CM7867D User manual

1 / 8
MODEL #
CM7867D
Questions?
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
VERSION # 21-11-21
2 - Persons
(Included)
Allen Wrench
Recommended
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PT)

2 / 8
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING

3 / 8
PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
scratches and damages.

4 / 8

DRESSER
CM7867-D
#1 1pc
Dresser Legs
#2 4pcs
5 / 8
#A 4pcs #B 4pcs #D 1pc
#C 4pcs
Flat Washer Allen Wrench M4
Bolt 1/4" X2-3/8" Lock Washer
Center Support Leg
#3 1pc
#E 1set
Anti-Tip Kit
29mm x 29mm x 90mm

ASSEMBLY INSTRUCTIONS
6 / 8
1
2
Part #1 x1pc
Hardware #A x4pcs
Part #2 x4pcs
Hardware #B x4pcs
Hardware #C x4pcs
Hardware #D x1pc
assembly
instructions
Take out assembly instructions
sheet, hardware pack and feet
packaging from the drawer which
marked with the rope.
#2
#C
#B
#A
#D
Prepare 4 bolt assemblies
by first. Inserting a lock
washer (#C) onto the bolt
(#A) then a flat washer (#B)
onto that same bolt (#A). Insert the legs (#2) into the slots
located on the bottom corners. Then
insert the prepared bolt assemblies
into the holes and secure.
2-2
2-3
Carefully place the nightstand
(#1) onto a protected surface
2-1
#2
#2
#2
#1
#2
#1 #3
Insert the threaded end of the
support leg (#3) onto the center
hole. Turn right to tighten.
2-4
Part #3 x1pc

ASSEMBLY INSTRUCTIONS
7 / 8
3
Hardware #E x1set
#E
For safety, please use the provided
hardware to secure the unit onto
the wall.
WALL
PRODUCT
WALL
#E
WALL

8 / 8