Furniture of America Leanna CM1027-F User manual

For more information contact our team: [email protected]

Prepare 16 bolts assembly by inserting lock washer (#D), then flat washer (#E) onto bolts (#H,I). Align back/
front rail (#5,6) to the end of the left/right arm (#1,2), then align bracket (#A) to the holes of the rails (#5,6) and
arms (#1,2). Secure holes on the rails (#5,6) with bolts (#H) and secure holes on the arms (#1,2) with bolts (#I).
Prepare 4 bolts assembly by inserting washer (#F) onto bolts (#J). Align
support rail (#8) to the holes of the arms (#1,2). Secure with bolts (#J).

Prepare 2 bolts assembly by inserting washer (#F) onto bolts (#J). Align support legs
(#9) to the holes of the support rail (#8). Secure with bolts (#J).
Prepare 4 bolts assembly by inserting lock washer (#D), then flat washer (#E) onto bolts (#G).
Align back rest (#3) to the holes of the arms (#1,2). Secure with bolts (#G).

Align middle slat (#7) to the center of the daybed, then align
slats (#4) next to the middle slat (#7). Secure with screws (#K).
Assembly Completed

For more information contact our team: [email protected]

Prepare 16 bolts assembly by inserting lock
washer (#C), then flat washer (#D) onto
bolts (#E). Align left and right panels (#3) to
the side of the trundle front and back panel
(#1,2). Align the brackets (#A) to the holes
of the panels, then secure with bolts (#E).
Align slats (#4,5) to the trundle. Make sure the middle slat (#5) is in
the middle and in-between the side slats (#4).

Secure slats to trundle with screw (#F).
Assembly Completed