Furniture of America CM7124-N-USB User manual

1 / 12
MODEL #
CM7124-N-USB
Questions?
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PT)
2 - People
Recommended
VERSION # 21-10-12

2 / 12
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING

3 / 12
PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
scratches and damages.

4 / XXXXXXX12

NIGHTSTAND
CM7124-N-USB
5 / 12
Drawer Back
#1 2pcs #2 2pcs #4 2pcs
#5 2pcs
Drawer Side (L)
#6 2pcs #7 1pc
#9 2pcs #10 3pcs #111pc #12 2pcs
Drawer Bottom Support
Drawer
Bottom Panel
Drawer Head Side Panel (L)
Front Rail Back Rail Top Panel Back Panel
Drawer Side (R)
2pcs
#3
Side Panel (R)
1pc
#8

6 / 12
#A 2pcs
Drawer Handle Trust Head Screw
M4x20 mm
#B 4pcs #C 28pcs #D 16pcs
#E 22pcs #F 24pcs #G 24pcs #H 10pcs
#I 4pcs #J 4pcs #K 1set
R
LL
R
CSK Screw
M3.5x16 mm
Panhead Screw
M4x16 mm
Plastic Dowel
M8x25 mm
Minifix Cam Lock Minifix Cam Bolt
M4x24 mm
Panhead Screw
M4x32 mm
Drawer Slide Body Slide Power Adapter & Cord
HARDWARE

ASSEMBLY INSTRUCTIONS - DRAWER BOX
1
Part #1 x2pcs
Hardware #E x4pcs
7 / 12
2
Part #2 x2pcs
Hardware #E x4pcs
Part #3 x2pcs
1
E
E
3
2
3
1
2
3
4
Hardware #H x8pcs H
1
3
2
5
Part #5 x2pcs
13
2
5

8 / 12
6
Part #6 x2pcs
Hardware #G x10pcs
7
Hardware #F x2pcs
Part #4 x2pcs
8
6
G
6
4
F
6
3
1
2
5
4
9
Hardware #F x8pcs
6
3
2
1
5
F
10
Hardware #H x2pcs 126
34
5
H
ASSEMBLY INSTRUCTIONS - DRAWER BOX
Please reference on the
bottom of page 9 on how to
connect cam bolts (#G) onto
cam locks (#F).

9 / 12
11
12
Hardware #A x2pcs
Hardware #B x4pcs
Hardware #C x12pcs
Hardware #I x4pcs
1
2
6
IR
IL
3
5
4
C
A
B
6
3
2
1
5
1. Fix the Cam Bolt (G) first before inserting
Cam Lock (F) to ease the assembly process.
2. When inserting Cam Lock (F), always
make sure the arrow pointed towards the
respective Cam Bolt (G).
3. Make sure the Cam Lock (F) is completely
inserted before turning it clockwise to tighten.
G
F
REMINDER !
ASSEMBLY INSTRUCTIONS - DRAWER BOX
Ensure that the wheel side of
the rails (#IR/IL) are towards
to back area of the drawers.

10 / 12
ASSEMBLY INSTRUCTIONS - BODY
1
Part #7 #8 x1pc
Hardware #G x10pcs
2
3
4
5
Holes for screw are already
provided. Be sure to align
each holes correctly.
!
G
7
Hardware #C x16pcs
Hardware #J x4pcs
C
JL
Part #9 x2pcs
Hardware #E x10pcs
Part #10 x3pcs
9
10
9
7
F
F
Hardware #F x2pcs
910
10
7
F
F
Hardware #F x3pcs
Ensure wheel side of the rails
(#JL/JR) are facing towards
the front of the side panels
(#7,8).