Furniture of America CM-BK458T User manual

1. Align the side rails (#5) to the slots along the
sides of the lower end guardrails (#1,2).
2. Insert 2 barrel nuts (#B)
into the holes along the
sides of the side rails (#5)
and insert 2 bolts (#A)
into each side of the
lower end guardrails
(#1,2). Secure using
the Allen wrench (#I).
1. Insert a wood dowel (#E) into the
center holes along the ends of the
guardrails (#6), then insert the other
end into the upper end guardrails
(#2,3). Insert a screw (#C) into
the upper end guardrails (#2,3).
Secure using a Phillips screwdriver.
2. Insert 2 barrel nuts (#B)
into the holes along the
sides of the side rails (#5)
and insert bolts (#A)
into each side of the
upper end guardrails
(#2,3). Secure using
the Allen wrench (#I).
I

Align the guardrail supports (#7) to
the holes along the center of the
rails. Insert 3 screws (#G) into each
and secure using a Phillips screwdriver.
Insert a wood pin (#F) into the holes along
the top of the bottom bed, then carefully
place the top bed onto those wood pins.

Insert 2 screws (#H) into
each end. Secure using
a Phillips screwdriver.
1. Insert the ladder rungs (#10)
into the slots along the left
and right ladder rails (#8,9).
2. Insert a screw (#D) into the
holes along each rail and
secure using the Allen wrench.

Align the completed ladder to upper end guardrail (#4)
and lower end guardrail (#2). From within insert a total
of 6 screws (#D). Secure using the Allen wrench (#I).
Place the slats (#11) onto the
upper and lower beds. Then insert
a screw (#G) into each end and
secure using a Phillips screwdriver.