Furniture of America Venta CM4238WHS User manual

Rev: 15-12-31

#2
Bracket
#B x 16pcs

1. Prepare 8 bolt assemblies by first inserting a
lock washer (#J) onto the bolt (#B) then a flat
washer (#I) onto that same bolt (#B). Align 2
brackets (#F) to each corner of the bottom
panel (#3). Insert those bolt assemblies into
the brackets and secure using the Allen wrench.
2. Prepare 1 bolt assembly
by first inserting a lock
washer (#J) onto the bolt
(#G) then a flat washer
(#I) onto that same bolt
(#G). Align the support
leg (#4) to the center of
the bottom panel (#3).
Insert that bolt assembly
into the leg and secure
using the Allen wrench.
1. Carefully place the table
top (#1) face down onto
a protected surface.
2. Align and place the legs
(#2) onto the corners
of the table top (#1).
3. Prepare 8 bolt assemblies by
first inserting a lock washer
(#D) onto the bolt (#A) then
a flat washer (#C) onto that
same bolt (#A), in that order.
Insert the bolt assemblies
into the corners and secure
using the Allen wrench (#E).

1. Align the bottom panel (#3)
to the bottom corners of
the legs (#2). Note, the
support leg should be facing
up. Have another person
hold the bottom panel (#3)
in place then place 2 brackets
(#F) along each corner.
2. Prepare 8 bolt assemblies by
first inserting a lock washer
(#J) onto the bolt (#B) then
a flat washer (#I) onto that
same bolt (#B), in that order.
Insert the bolt assemblies
into the corners and secure
using the Allen wrench (#H).
Place the glass top (#5)
onto the table top (#1).
Carefully turn the
completed table
upright. Make sure
the table is rested
on a flat surface
and does not feel
loose or wobbly.
If it does, double
check that the
bolts are secured
and properly
tightened.
ASSEMBLY IS COMPLETED