Furniture of America Winsor CM7058CK User manual

1 / 8
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
MODEL #
CM7058CK/EK/Q
VERSION # 20-06-18

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX8

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX8

4 / XXXXXXX8

Screw M8 x 30mm
Headboard Footboard Bed Rail Bed Slat (13pcs)
#1 1pc #2 1pc #3 2pcs
#A 14pcs
5 / 8
#4 1Set
#5 1pc #6 4pcs
CM7058CK/EK/Q
BED
Center Rail Support 30x30x350mm

CM7058CK/EK/Q is packed in 3 cases
Carton Disignation Part Hardware
Headboard
Footboard
Support Leg
Side Rail
CM7058CK/EK/Q-HB
CM7058CK/EK/Q-R
#A 14pcs
CM7058CK/EK/Q-FB
Bed Slat
Center Rail
#1
#2
#3
#4
#5
#6
6 / 8
#2
#1
#3
#4
#5
#6

#1
#3
#2
#3
#6
#5
1
2
Part #1 x1pc
Part #2 x1pc
7 / 8
ASSEMBLY INSTRUCTIONS
Part #3 x2pcs
Part #5 x1pc
Part #6 x4pcs
Hook each end of the bed rails (#3) to the slots along
the headboard panel (#1) and the footboard panel (#2).
Insert the threaded ends of the supports (#6)
into the holes along the center rail (#5).
Adjust according to the ground level.

#A
#A
#4
3
4
Hardware #A x2pcs
8 / 8
ASSEMBLY INSTRUCTIONS
Hardware #A x12pcs
Place the center rail (#5) onto the slot
along the center of the headboard and
footboard, then insert a screw (#A) into
each end. Secure using a screwdriver.
Place the bed slats (#4)
onto the bed rails (#3),
then insert a screw (#A)
into each hole. Secure
using a screwdriver.