Furniture of America CM7705CPN User manual

1. Align the angle irons (#12) to the corners
connecting the headboard frame down (#3),
side guardrails (#1), and footboard frame
(#5). Then insert 4 bolts (#A) into each angle
iron and secure using the Allen wrench (#C).
2. Apply the wheel cover (#13) onto the wheels
by inserting the threaded end into the center
hole. Turn clockwise (right) to tighten.
1. Insert footboard bars (#10,11) into the slots
along the ends of the footboard frame (#5),
then insert bolts (#A) into the bottom and
bolts (#B) into the holes along the sides of
the bars (#10,11). Secure using the Allen wrench.
3. Insert bolts (#B) into the holes
along the sides of the bars (#8,9).
Secure using the Allen wrench.
2. Insert headboard bars (#8,9)
into the slots along the ends
of the headboard frame (#3),
then insert bolts (#B) into the
holes along the sides of the bars
(#8,9) to connect with the wheel.
Secure using the Allen wrench.

1. Insert the head-
board frame
up (#4) into the
slot at the top
of the headboard
frame down (#3).
2. Align the ends of the headboard frame
up (#4) to the holes along the headboard
support bars (#8,9). Insert a bolt (#A) into
each end. Secure using the Allen wrench.
3. Apply the slats
(#2) into the
slots along the
side guardrails
(#1).
4. Apply the slats (#14) into the center
and second to last slots along the side
guardrails (#1). Insert a bolt (#A) with
flat washer (#D) into each end. Secure
using the Allen wrench (#C).
1. Insert the top crown
(#7) into the top
crown support (#6).
2. Insert a bolt (#A)
and secure using
the Allen wrench.
3. Insert the top of the support bars
(#8,9,10,11) into the holes along
the top crown support (#6), then
insert a bolt (#A) into each hole.
Secure using the Allen wrench.

Align the slat support
legs (#15) to the holes
along the slats (#14),
then insert a bolt (#B)
into each slat from
above and secure using
the Allen wrench (#C).
ASSEMBLY IS COMPLETED