Furniture of America Annemarie CM-BK965F User manual

For more information contact our team: [email protected]

Insert wood dowels (#G) and barrel nuts (#B) to each end of
shelves (#13). Align and attach shelves (#13) to the holes of the
large bookshelf panels (#11,12). Secure by screwing and
latching bolts (#D) onto barrel nuts (#B).
Align horizontal bar (#14) to the holes of the large shelf (#12), then secure with bolts (#E).

1) Insert wood dowels (#G) and barrel nuts (#B) to each end
of back guardrail (#4) and right side of front guardrail (#5).
Align and attach back guardrail (#4) and right side of front
guardrail (#5), then secure by screwing/latching bolts (#A)
onto barrel nuts (#B).
2) Insert barrel nuts (#B) to the left side of the front
guardrail (#5), then secure by screwing/latching bolts
(#A) onto barrel nuts (#B).
1) Insert wood dowels (#G) to the top holes of
the behind panel (#7). Attach and align behind
panel (#7) to the back guardrail (#4) and left
headboard.
2) Insert barrel nuts (#B) to the side holes
of the behind panel (#7), then secure by
screwing/latching bolts (#C) onto bolts (#B)

1) Insert dowels (#G) and barrel nuts (#B) to the back end
of the stair panels (#8,9,10). Attach stair panels (#8,9,10)
to the holes of the behind panel (#7). Secure by screwing/
latching bolts (#C) onto barrel nuts (#B).
2) Align the front of the stair panels (#8,9,10)
to the holes of the side panels, then secure with
screws (#F).
1) Attach dowels (#G)
to back bar (#6).
2) Insert dowel (#G) and barrel
nuts (#B) to the other end of the
back bar (#6). Align back bar (#6)
to the back bottom holes of the
bunk bed. Secure with bolts (#A).
3) Insert barrel nuts (#B) and
dowels (#G) to the complete shelf
from steps 2. Align and secure
with bolts (#C).
4) Align and secure with bolts (#C) and bolts (#A).

1) Align iron bas (#K) to the bottom
corner of the back guardrail, then secure
with screws (#J).
2) Align iron bas (#H) to the
back guardrail and behind
panel. Secure with screws (#J).
3) Align iron bas (#M) to the back bar (#6) and
behind panel (#7). Secure with screws (#J).
Secure hole onto the back of the
stairs by using screws (#E).

Align center support rail (#16) to the top bunk,
then secure with screws (#I).
Align slats (#15) to the side rails, then secure with screws (#I).