Fusion VECTOR NX81 User manual

VECTOR NX81
OpErATInG InSTrUCTIOnS
Please keep for future reference
Input Voltage 110~240V AC
Output 4-8 Cell Ni-Cd/NiMH
Charge Rate 0.5, 1, 2, 3.5 or 5 Amps
Delta Peak Cut-off
www.logicrc.com
Logic RC Limited, 14 Hartham Lane, Hertford, SG14 1QN, UK
SpECIFICATIOnS

•Adjustable charge rates.
•Reverse Polarity Protection on Output.
•Delta Peak cut-off.
•Connect the battery charge leads to the charger by clamping
the bare ends of the lead into the output. Please ensure
correct polarity (+ = red, - = black).
•Connect the input power lead into the socket on the back of
the charger and connect the mains plug into the supply.
•Select the correct charge rate for the battery pack being
charged.
•Connect the battery to be charged to the output. When
connected, the Red LED will glow to indicate fast charging.
•When the battery is fully charged, the peak circuitry will
terminate the fast charge and the Green LED will glow to
indicate that the battery is now fully charged.
The charging time for a discharged pack can be calculated by:-
Time (hours) = Battery Capacity (mAh) / Change Rate (mA) x 1.2
•Do not charge packs that cannot accept fast charging at
the selected rate.
•Always monitor the battery pack being charged and
disconnect from the charger if the pack becomes
excessively hot.
•NEVER leave the charger unattended whilst charging.
•DO NOT fast charge batteries immediately after use while
they are still warm. Allow to cool to ambient temperature
before charging.
opErAtion
FEAturEs
SAFEty prEcAutions