Brochure No. FUTZ0262 © Copyright 2005 — 3088492/493 Distributed Exclusively Through GREAT PLANES MODEL DISTRIBUTORS COMPANY, P.O. Box 9021, Champaign, IL 61826-9021
“Advanced radio technology
for precise, dependable control.”
They’re designed to perform almost any radical 3D stunt, indoors or out, assemble
in just 2-4 hours and offer more ease and value than any other foam aerobat! The
bipe wings are printed depron, with lightweight gear and foam wheels for added
ease. The EPS foam fuselage already includes bays for the battery, ESC, receiver
and aileron servo, but leaves rudder and elevator placement open for customizing
CG. All foam parts are protected by the Ultrafly Model “No-Worry Parts
Guarantee” — an industry first that replaces any foam part damaged within the
first 3 months after purchase!**. And in addition to the guarantee, they also offer
two options: a stick mount or firewall mount for outrunner motors, plus a choice
of threaded steel pushrods for beginners or ultra-light, rigid carbon fiber pushrods
for advanced fliers. Combine the ESC below with any of the battery choices to
create a custom power package.
GPMM2070 BL-8 Brushless ESC
GPMP0810 Li-Po 720mAh 7.4V 2-Cell Pack
GPMP0805 Li-Po 640mAh 11.1V 15C 3-Cell Pack
GPMP3015 PolyCharge4 Li-Po Pack Charger
Ultrafly Model™ARFs
Wingspan (both): 28.3 in (720mm)
Weight (both): 10.2 oz (290g)
Both require: 4-channel radio* w/3 micro servos, brushless
outrunner motor and 8-10A ESC or brushed motor, gearbox
and ESC, 2- or 3-cell Li-Po pack and compatible charger
* = 4-6 channel radio for Outrage.
Furious ARF (UFLA1100)
** = see www.ultraflymodel.com for full details.
Hobbico
®NexSTAR™46 ARF
The NexSTAR is already what trainers will be in the future: a
well-built craft that offers the ease of factory assembly and a
collection of innovative features designed for first-timer success.
There’s the CenterCore
™
Main Wing Rib, that aligns the wing to
perfection and features a built-in aileron servo mount. It includes
SpinControl™ Airfoil Extensions that provide lift even in a stall
— and keep the pilot in control all the while. SpeedBrakes
™
Training Flaps that hold airspeed down to give new pilots more
time to think and react. The NexSTAR offers all three, plus
the NexSTAR Precision Airfoil, PivotFlex™ Wing Mounting,
IsoSmooth™ Engine Mount and more — and all boost a new
pilot’s chances for flight success. See www.hobbico.com for
details! HCAA2025.
Wingspan: 69 in (1745mm)
Wing Area: 722 sq in (46dm2)
Weight: 6.9 lb (2.93kg)
Wing Loading: 21 oz/sq ft (62g/dm2)
Length: 56 in (1420mm)
Requires: 4-channel radio w/4 servos, .46
engine, glow fuel and support equipment
Futaba®Universal Gear Bag
There are bags for radios, chargers,
engines, but this is the only bag that
can be customized to carry any of
them. All five 10” x 12” (250 x 300mm)
foam layers are die-cut into 1” squares,
making it easy to create custom shapes
by removing excess padding. Its tough
nylon exterior is reinforced by 1”
(25mm) webbing. Other features include
a padded bottom and double-zippered
lid, hook & loop-sealed pouch for
cords and crystals and an adjustable,
removable shoulder strap.
FUTP1001
Futaba®PAR-2 Pilot Assist Link
w/Receiver
It’s a boon for beginners: a
device that automatically
returns a plane to level
flight. Sensitivity can
be adjusted from the
transmitter, and set to as
little as 0%, or as much
as 100%! Includes a light-
sensitive sensor and a 4-channel dual-conversion receiver which
can be mounted almost anywhere inside the fuselage. Together,
they add only 2.15 oz. (61g) to all–up weight and draw only 20mA
from a 4-cell Rx battery. 1-year warranty. 72MHz.
FUTL0995 PAR-2 PILOT ASST LINK W/RX 72L
FUTL0996 PAR-2 PILOT ASST LINK W/RX 72H
Outrage ARF (UFLA1101)
www.futaba-rc.com
3088493 fut-ssb 4exa.indd 1 8/2/05 9:22:25 AM
