FUTABA T16IZ User manual

YourFutabaT16IZSUPERtransmitterprogrammingcanbeupdated
easilyonline.Whenfunctionsareaddedorimproved,theupdatefile
canbedownloadedfromourwebsite.Copytheupdatefilestothe
microSDcardandthenusethefollowingproceduretoupdatethe
program.CheckourwebsitefortheFAQregardingupdatingformore
information.
HowtoupdateT16IZSUPER
ŸƓƇƄƗƌƑƊŃƓƕƒƆƈƇƘƕƈ
Note: If the battery fully discharges during
program updating, updating will fail. When
the remaining battery capacity is 50% or
less, always recharge the battery before
updating.
Note: The model data in the transmitter can
be used unchanged after updating, but to
be safe, back up the model data before
updating.
1. Download the zip file of the update data
from our website.
([WUDFWWKH]LSÀOHRQ\RXUFRPSXWHU
3. The "FUTABA" folder will be created on your
computer.
4. Copy the "FUTABA" folder into your microSD
card.
Note: If the microSD card has already had
"another FUTABA" folder before you make a
copy, the "FUTABA" folder is OVERWRITTEN.
5. Insert the microSD card with "FUTABA" folder
that contained the update software into
the SD card slot on your T16IZ SUPER radio
transmitter.
6. Turn on the transmitter power while pressing
down the "HOME/EXIT" button. The update
screen appears on the LCD display of your
T16IZ SUPER and the software update is
started.
FutabaWEB
16IZSUPERUpdateZipfile
Download
Copythe"FUTABA"
folderintoyourSDcard.
InstalledmicroSDcard
oftheupdatefile
PresstheHOME/EXITswitchandturnon
Updating
1
2

7. When the software update is completed,
"Completed" message is shown on the LCD
display of your T16IZ SUPER. (Show below
picture.)
8. Turn off the power switch of your T16IZ SUPER
and remove the microSD card from the card
slot.
Possible Problems
When one of the error messages shown
below appears on the LCD screen your
T16IZ SUPER, the software update will not be
completed.
"Low battery."
Software update is postponed because
of low battery. Retry the software update
after the battery is recharged.
8SGDWHÀOHQRWIRXQG
7KH7,=683(5FDQQRWÀQGWKHXSGDWHÀOH
on the microSD card. Check to be sure all
the update files have been copied onto
the microSD card.
%URNHQÀOH
The T16IZ SUPER detects the update file
HUURU7KHXSGDWHÀOHPD\EHEURNHQRUIRU
another transmitter.
"Write error."
The software update procedure is stopped
for an unknown reason. Contact your local
service center when this error message
appears on the LCD screen of your T16IZ
SUPER.
Don't absolutely remove the battery
and the microSD card from the
transmitter during the update.
There is a possibility that the transmitter
will be damaged.
Recovering a failed update
If you failed to update for any reason, it
may transmitter will not start.
In that case, please update again
transmitter in the following procedure.
1. Detach the battery from the transmitter.
2. Insert the microSD card that contained
WKHXSGDWHÀOHVWRWKHWUDQVPLWWHU
3. Attach the battery to the transmitter
while pressing down the "HOME/EXIT"
button.
4. The update will start.
Even after the above steps, if the
transmitter fails to update or does not
start, please have it serviced.
Complete

1M23Z09106 T16IZSUPERSOFTWAREUPDATECHANGES
V2.1
Thissoftwareupdatesoraltersthefunctionsandfeaturesnotedbelow.Theinstructionsandinformationthatfollowaremeantasasupplementtotheoriginal
instructionmanualthataccompaniedtheT16IZSUPERtransmitter.Pleaserefertotheoriginalinstructionmanualwhereapplicable,butreplacethestepsindicated
belowwiththeseinstructions.Pleasechecktoensurethattheupdatehasbeeninstalled.
1)SelecttheSystemMenu.
2)Touchthe[Information]button.
3)Confirmthattheinformationinthedisplayindicatestheversionnumbersasnotedabove.
1.BugfixforEuropeanT16IZSUPER[ForEuropeonly]
FixedanissuewherecommunicationbecameunstablewhenoperatinganothertransmitteratashortdistancewhenusingtheT16IZSUPER
soldintheEuropeanregion.ThisproblemisONLYwhenyouuseT16IZSUPERunderS-FHSSmode.
*T16IZSUPERsoldoutsideEuropedoesnothavetheaboveproblem.Also,T16IZdoesnothavetheaboveproblem.

1.Receiverorgyroupdates
ByconnectingareceiverorgyrothatsupportsupdatestotheS.I/Fconnectorofthetransmitter,itispossibletoupdatetheirsoftware.
① DownloadtheupdatefileoftheupdatedatafromFutabawebsite.
② Extracttheupdatefileonyourcomputer.The"FUTABA"folderwillbecreatedonyourcomputer.
③ Copythe"FUTABA"folderintoyourmicroSDcard.
④ InsertthemicroSDcardwith"FUTABA"folderthatcontainedtheupdatesoftwareintotheSDcardslotonyourtransmitter.
⑤ Turnonthetransmitterandcall"SystemMenu"⇒"Update".
⑥ Selecttheproducttoupdate.
*ConventionalServoUpdateandSensorUpdatescreensopenfromthisscreen.
⑦ Selecttheproductnametoupdate.
V2.0

V1.2
AirplaneGyroGYA553iscompatiblewith3rdaileronand4thaileron.
1.GYA553NewfirmwareVersion3.xsupport. → RefertoT16IZ/T16IZSUPERGYA553V3Setting
manual
©FUTABA CORPORATION
⑧ Theupdatescreenisdisplayed.ConnectthereceiverorgyrotobeupdatedtotheS.I/Fconnectorofthetransmitter,prepare
forupdate,andthentapthe[Update]button.
⑨ Updatestart.
⑩ Whenfinished,thefollowingwillappear.
⑪ Disconnectthereceiverorgyrofromthetransmitter'sS.I/Fconnector.