Gainsborough H582 WW User manual

200 LED WARM WHITE/MULTICOLOURED
H582 WW/MC v001: 26/03/21
Please read and retain these instructions for future reference
ALWAYS POSITION IN DIRECT SUNLIGHT
H582 WW 200 LED Warm White
H582 MC 200 LED Multicolour
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
This product consists of a solar cell, rechargeable battery and LED light. During the day, sunlight charges the
battery. At night, the energy stored in the battery is used to power the light. No other power or connections
are required. The length of time the light will stay on for depends on how much sunlight has been received
during the day.
The solar panel should be located where sunlight can fall directly on it –avoid shadows from buildings, trees,
walls, hedges and similar objects, as these will reduce performance.
Please read and follow all instructions before operating your lights. Save this manual for future reference.
BEFORE FIRST USE: Remove the protective film from the solar panel.
CHARGING AND OPERATION:
1. Set switch (located on the back of solar case) to “ON” position. Charge the solar product by placing it
under direct sunlight for at least 8 hours.
2. The light will work automatically. It will automatically charge under direct sunlight during the day
time and illuminate at night.
3. This solar lights has “Flashing” function as well. Turn switch to “ON” position and press “MODE”
button you can achieve the “ FLASHING” function.
NOTE: In order to verify that the switch is correctly in the “ON” position, cover the solar panel with your
hand and the light should turn on automatically.
IMPORTANT:
1. Install the solar product in an area where it can get direct sunlight.
2. Leave the switch to “ON” position.
Total length: 21.9m
Battery 1 pc AA 1.2v 800Mah, Ni-MH,
Rechargeable (included)

200 LED WARM WHITE/MULTICOLOURED H582 WW/MC Instructions for Use
Please read and retain these instructions for future reference v001: 26/03/21
3. Select an outdoor location away from other light sources at night, such as street lights. It may cause
the product not to turn on automatically at night.
4. Duration of light depends on solar product’s level of sunlight exposure, geographical locations,
weather conditions and the hours of daylight.
MAINTENANCE
•Clean with a soft damp cloth.
•Do NOT use abrasives or solvents.
•Do NOT disassemble or attempt to repair the solar marker housing other than to replace the
rechargeable battery.
•Clean regularly as a build up of dirt on the solar panel will reduce performance.
•Make sure the switch is set to “ON” position.
•Keep the solar panel clean.
•If solar product does not light up after it has been used for around 8 –12 months, replace the
rechargeable batteries as they may be weak or worn out. (Battery 1 pc “AA” 1.2v 600Mah, Ni-MH,
Rechargeable–Same equivalent type as recommended must be used).
Battery replacement:
Step1: Unscrew the battery compartment cover by using a Phillips head screwdriver (not included) .
Step2: Remove the exhausted battery and install 1 pc new AA rechargeable battery according to the +/-
polarity as beside image. Open the compartment carefully and ensure that welding wires inside the battery
terminals are not damaged.
Step3: Replace battery compartment cover, screw it back into position and make sure is properly sealed.
BATTERIES
•Keep batteries away from children and pets.
•Do not mix used and new batteries.
•Remove the batteries if left for long periods.
•Never dispose of batteries in a fire.
•Battery disposal, spent or expired batteries must be properly disposed of and recycled in compliance
with local regulations. For detailed information, contact your local authority.
•Follow the battery manufacturer’s safety, usage, and disposal instructions.
DISPOSAL
•Coopers of Stortford use recyclable or recycled packaging where possible.
•Please dispose of all packaging, paper, cartons, packaging in accordance with your local
recycling regulations.
•Plastics, polybags –Contains the following recyclable plastic.
Code & Symbol
Type of Plastic
ABS

200 LED WARM WHITE/MULTICOLOURED H582 WW/MC Instructions for Use
Please read and retain these instructions for future reference v001: 26/03/21
Commonly used for
CD’s, crisp packets, various flexible packaging, baby bottles,
sunglass lenses
Notes
Not often or widely recycled
•At the end of the product’s lifespan please check with your local council authorised household waste
recycling centre for disposal.