Gajah International GD67CT User manual

GD67CT Portable Speaker
Quick Start Guide

GD67CT Quick Start Guide
FCC Information
This device complies
with Part 15 of the FCC Rules. Operation is subject to the following two
conditions (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures
-- Reorient or relocate the receiving antenna.

GD67CT Quick Start Guide
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help.
The symbol means that the unit complies with European safety and electrical
interference directives.
Disclaimer
Updates to hardware components are made regularly. Therefore some of the
instruction, specifications and pictures in this documentation may differ slightly
from your particular situation. All item described in this guide for illustration
purposes only and may not apply to particular situation. No legal right or
entitlements may be obtained from the description made in this manual.
Safety precautions
•Never subject speaker to extremes of light, temperature, moisture or
vibration.
•Do not use or store speaker in a location subject
A. Extreme high temperature, such as in a sun-heated car

GD67CT Quick Start Guide
B. Direct sunlight
C. High humidity or places with corrosive substances
D. Sub-zero condition, especially during winter.
•Clean only with a dry cloth.
•Don’t block any of the ventilation openings, install according to the
manufacturer’s instructions.
•Refer all servicing to qualified service personnel. Servicing is required when
the unit has been damaged in any way.

GD67CT Quick Start Guide
1
Parts and Control

GD67CT Quick Start Guide
2
Power Bluetooth button – slide to turn the speaker on/off or for setting
Bluetooth mode.
USB port – for emergency charging.
Line-in cable – for connecting to music source device.
Accessories
1 X GD67CT portable speaker
1 X USB cable
1 X Quick start guide
Getting Started
1. Remove speaker from packaging.
2. Press down on the base of the speaker to release
the extension base.

GD67CT Quick Start Guide
3
3. Then base “pops up”, press the base down
again to collapse the base.
Charging the GD67CT speaker
Connect the speaker to the PC via the provided USB cable. Before using the
product, charge it for 2 hours, till the LED turn from Red to off. The speaker
can play up to 3hours after fully charged.
Turning On Off the GD67CT speaker
To turn on the GD67CT portable speaker, slide the Power/Bluetooth button
at the middle of the bar, then the blue LED will light up.

GD67CT Quick Start Guide
4
To turn off the GD67CT portable speaker, slide the Power/Bluetooth button
to the left “Off” side of the bar.

GD67CT Quick Start Guide
5
Playing the music
1. Unwind the Line-in cable around the
portable speaker base.
2. Plug the Line-in cable to the music source, e.g. PCs/laptops, MP3 players or
radios.
3. Turn on the unit.
4. Start playing the selected music or radio from the music source.
Setting Bluetooth mode

GD67CT Quick Start Guide
6
1. Upon powering on, continuously slide the Power Bluetooth button to be
towards the “ CT” side to set bluetooth mode.
2. Search for Bluetooth name for GD67CT Speaker in your Bluetooth device.
3. Select the Bluetooth name for GD67CT speaker for pairing (No pairing password
is required.).

GD67CT Quick Start Guide
7
Technical Specifications
Audio
Output Channel Mono
Output Power (Max) 3.0W
Frequency response 80Hz ~ 20KHz
Sensitivity 90dB
Sound pressure level 65dB
Signal to noise ratio @ 1KHz Input 80Db
Bluetooth
Bluetooth Profile A2DP, AVRCP
Bluetooth Version V3.0+EDR
Frequency 2.4GHz
Working Distance Up to 10M (Line of Sight)
Antenna Type Internal antenna
Connectivity
Audio 3.5 mm audio cable
Power Mini USB
Power
Battery Type Built-in Li-ion polymer 250mAh
Battery Cycle Life 300 cycles
Playback Time Up to 3 hrs (approx.)

GD67CT Quick Start Guide
8
Charging Power 5V, 500mA (max)
Charging Time 1 hrs 80%, 2 hrs 100%
Environmental Condition
Storage Temperature - 20℃+40℃/ ± 5℃
Storage Relative humidity 60 ± 15％
Operation Temperature - 20℃+40℃/ ± 5℃
Operation Relative humidity 60 ± 15％
Certification
CE, FCC, ROHS Packaging Material Directive
Physical Properties
Dimension 70 x 70 x 37 mm
Weight 91.5g

GD67CT Quick Start Guide
9
Recycling
This product bears the selective sorting symbol for waste electrical and
electronic equipment (WEEE).
This means that this product must be handled pursuant to European
Directive 2002/96/EC in order to be recycled or dismantled tominimize its impact
on the environment.
For further information, please contact your local or regional authorities.
Electronic products not included in the selective sorting process are potentially
dangerous for the environment and human heath due
to the presence of hazardous substances.