Gama Sonic BAYTOWN II GS-105SG User manual

1
Introduction
Thank you for your purchase! GAMA SONIC®solar charged accent lighting eliminates
the problems associated with most solar lighting available today. GAMA SONIC®solar
charged lights are brighter and last all night with a typical solar charge. Unique
design, superior light output and numerous installation options confirm the
BAYTOWN II
SOLAR LAMP POST
US Patent # 7172307
Patent Pending DIY Installation
For Solar Lamp Post
Instruction Manual
Model: GS-105SG

2
1. Attach the body(B) to the stem(D) with
the four supplied screws,
as shown.
outstanding value of our product. GAMA SONIC®has been recognized as a worldwide
leader in the lighting industry for over 20 years. The company also offers unique
multi-purpose rechargeable products that range from party lights to emergency
lighting products.
Technical Assistance/Warranty Claims/Replacement Parts
Toll Free Number: [phone] (only within the US) or www.gamasonic.com
Visit our website or download the latest version of your instruction manual:
www.gamasonic.com or www.gamasonic.com/user-guides
Please read the instruction manual carefully to obtain the best results from your
purchase.
Solar Lamp Post Location
For optimum light duration throughout the night, it is very important to place your
solar lamp in a spot where it will receive the maximum amount of direct sunlight
throughout the day.
NOTE: For best results, the solar lamp post must be charged for two sunny days on
the “ON” position.
Assembly Instructions:
2. Place the lens and cone(C)
in the body(B).
B
D
C
B
D

3
Two easy ways for installation:
Flat mount (8.1 - 8.2)
EZ Anchor (9.1 - 9.7)
7. Assemble pole by screwing the four
pieces together.
3. Turn on switch to desired setting.
4. Attach top(A) to the body(B) with
the two supplied screw caps.
5. Attach Side handles provided.
6. Screw on top Ornament.
B
A
D
A
A
D

4
Flat installation (Installing the lamp post without anchor):
EZ Anchor Installation Instructions:
9.3 Place anchor in desired location and apply downward pressure while turning
the Turning bar clock wise.
9.4 Occasionally check the anchor Level Tool to ensure your digging is straight.
9.5 Stop turning once Part (I) is flat with ground level.
9.6 Remove the Turning Bar(G).
9.7 Screw the fixture to the Anchor.
8.1 Mark three holes with the base plate as a
template. With an electric drill, drill the
holes into concrete. Assemble with the
hardware provided.
8.2 After assembling attach the three
decorative caps provided.
and screw the fixture to the base.
9.2 Insert the Turning bar (G) in
the hole through the anchor
stake (H) as shown.
9.1 Attach Part (E) to Part (F) Using the
four small screws from, as shown.
I
G
H

5
Operation Instructions
1. Remove the top (A) by unscrewing the 2
screw caps. Turn the operation switch to
“summer” (for greater brightness) or
“winter” (for longer duration) position. The
Solar Lamp will automatically operate at
dusk.
2. Reattach top (A) and secure with the 2
screw caps.
Batteries
Read carefully the next section. Here you will learn how to add a secondary
battery (optional), and how to replace your existing battery once it exceeds its
life span.
Secondary Battery (Optional)
Our GS-105 model features two (2) battery compartments (Fig.2). This light
comes with one (1) pre-installed battery (included), and you have the OPTION
to add a second battery. This is a unique feature designed to give you more
choices to prolong the duration of your solar light.
Use this option if your light is exposed to the sun for more than 4 hours a day.
Shorter exposure will NOT charge the second battery and therefore it is not
necessary.
Fig.2
Battery
Compartment 1
Battery
Compartment 2

6
Adding Secondary Battery
(This solar light allows you to add a secondary battery. Follow the below instructions
to install it.)
1. Unscrew the two screw caps and detach the top (B). Make sure the
ON/OFF switch is in the OFF (O) position.
2. Unscrew the battery compartments screws located on the silver
reflector and remove the compartment’s door to locate the empty
compartment (Fig.2).
3. Make sure the battery is a Gama Sonic - 3.2V/1,500mAh, Li-ion
Rechargeable Battery with a connector.
4. Clip on the new additional battery and install it into the battery compartment.
Screw back battery compartment screw. Reattach the top and secure it with
the two screw caps.
Replacing the Battery
(After several years of use, the battery may need replacing.)
1. Unscrew the two screw caps and detach the top (A).Make sure the
ON/OFF switch is in the OFF (O) position.
2. Unscrew the battery compartment (Fig.2) screw located on
the silver reflector and remove the compartment door.
3. Unclip the connector and remove the old battery (Fig.4).
Make sure the new battery is a Gama Sonic -
3.2V/1,500mAh, Li-ion Rechargeable Battery with a
connector.
4. Clip on the new battery and install it into the battery
compartment. Screw back battery compartment screw.
5. Reattach the top and secure it with the two screw caps.
You can purchase it directly at: https://gamasonic.com/product-category/parts-and-
accessories/ . Make sure the new battery is a Gama Sonic - 3.2V/1,500mAh, Li-ion
Rechargeable Battery with a connector.
Fig.4
Fig.3
Battery
Compartment
(Provided)
Battery
Compartment
(Optional)

7
WARNING: Do not dispose of Li-Ion battery in the regular trash, municipal waste
stream or by fire as batteries may leak or explode. Do not open, short circuit, or
mutilate batteries as injury may occur. Preserve our environment by recycling Li-Ion
batteries or disposing of them in accordance with local, State and federal regulations.
Do not mix old and new batteries.
MAINTENANCE: Clean the solar panels regularly with a damp towel to guarantee
optimum performance. Do not use any type of solvent for cleaning and be careful not
to put too much pressure on the solar panels while cleaning.
TROUBLE SHOOTING: If your solar charged light does not come on at dusk
despite observance of all the instructions, please try the following steps:
1. Make sure that the solar lamp is not being affected by any other light
source.
2. Ensure the solar lamp is not positioned in the shade during the day.
3. Make sure the switch on the lamp head is in either the Low or High
position.
4. Check that the batteries are installed correctly.
NOTE: The performance of the solar lamp will vary with the time of year. It will
deliver more light when it has had a full day in the sun rather than a day in overcast
weather.
WINTERTIME TIPS: For optimal performance, be sure to remove any snow or
debris accumulation from solar panel(s). A solar panel free of debris will charge the
batteries much more efficiently.
WARNING: Please keep out of reach of children.