Gama Sonic DP55F0 User manual

6.5' DECORATIVE
POST, CAST
ALUMINUM
3" FITTER
Model: DP55F0/ DP55F2
Version 1.2
Instruction Manual

This product is covered for a 2-year warranty period.
In order to make sure that you will be covered, please activate your warranty by filling out all the
information needed with the proof of purchase in the link below. www.gamasonic.com/warranty
page 2
Thank you for your purchase. GAMA SONIC® solar charged lights are brighter and last all night with a full day solar charge.
Unique designs, superior light output, and numerous installation options confirm the outstanding value of our product.
For technical assistance and more information call our Toll-Free number:
800-835-4113 (only within the US)
Or
visit our website or download the latest version of your instruction manual:
www.gamasonic.com Or www.gamasonic.com/user-guides
Please read the instruction manual carefully to obtain the best results from your purchase.
Unpack and identify
the following components:
Installation Instructions
Tools that are needed but not
supplied with the Outdoor
post light pole are: a screw
driver, a wrench and an
electrical drill that will be used
to anchor the lamp base to
the ground.
NOTE:
The following steps are
for reference only. Consult
your local hardware store for
the best installation method
for your particular surface.
1. Using the Base Pole (A) Mark and drill three holes
into a solid surface no larger than the size of the
concrete anchors.
2. Put the concrete anchors into the drilled holes with
their threaded ends facing up (Fig. 2).
3. Place pole base onto the anchors and secure it with
the washers, lock washers, and nuts using a wrench
(Fig. 3).
4. Make sure the pole base (A) is stable before installing
Part (B).
5. Place part (B) on top of part (A) and tighten with the
provided screws using a wrench or screwdriver.
6. Screw part (C) to part (B) by twisting
the pole clockwise. Repeat the
same process to secure part (D) to
part (C) and part (E) to part (D).
the following components:
Tools that are needed but not
supplied with the Outdoor
post light pole are: a screw
driver, a wrench and an
electrical drill that will be used
to anchor the lamp base to
the ground.
NOTE:
for reference only. Consult
your local hardware store for
the best installation method
for your particular surface.
D
E
C
B
A
Screw part (C) to part (B) by twisting
same process to secure part (D) to
Fig. 1
Fig. 2
Fig. 3