Gama Sonic 94BM500D2 User manual

VICTORIAN BULB MORPH SOLAR LAMP POST
WITH DOUBLE DOWNWARD LAMPS
Part #: 94BM500D2
Version 1.1
Instruction Manual
US Patent #9458970, 7172307

page 2
Thank you for your purchase! GAMA SONIC®solar charged lights are brighter and last
all night with a typical solar charge. Unique design, superior light output and numerous
installation options confirm the outstanding value of our product. GAMA SONIC®has
been recognized as a worldwide leader in the lighting industry for over 20 years.
Technical Assistance/Warranty Claims/Replacement Parts
Toll Free Number: [phone] (only within the US) or www.gamasonic.com
Visit our website or download the latest version of your instruction manual:
www.gamasonic.com or www.gamasonic.com/user-guides
Please read the instruction manual carefully to obtain the best results from your purchase.
For best results, the solar light must be charged in the “ON” position for at least
2 days of full direct sunlight.
Gama Sonic’s NEW Morph Solar Panel
Technology is a groundbreaking process
in the way we capture more power from
the sun. Our Morph technology still uses
monocrystalline solar panels. However,
instead of the standard limited sized
solar panels, our new technology allows
the solar panels to MORPH into the light
fixture.
A = Top
B = Fixture
C = Centerpiece
D = Finial Cap
E = Spacer Pole
(located inside of part G)
F = Top Pole
G = Middle Pole
H = Base Pole
D
A
C
E
F
G
H
B
For optimum light duration throughout
the night, it is very important to mount
your solar lamp in a spot where it will
receive the maximum amount of direct
sunlight throughout the day.
Gama Sonic’s New Morph Technology What's in the Box
Solar Lamp Location
Bulb(s) Screws Concrete
Anchors

Assembly Instructions Operation Instructions
(follow these instructions for each lamp head)
Replacement Parts
page 3
• Using the provided template, mark and drill three holes into
concrete no larger than the provided anchors.
• Place the anchors into the holes with the threaded ends
facing up.
• Place the base pole (H) over the
anchors and secure using a wrench.
Cover the nuts with the provided
plastic covers.
• Make sure you remove the spacer pole
(E) from the inside of the middle pole
(G).
• Place the middle pole (G) over the
base pole (H) and secure using the
provided screws.
• Attach the top pole (F) to the middle
pole (G), and the spacer pole (E) to
the top pole (F) by twisting the poles
clockwise.
• Attach the finial cap (D) to the
centerpiece (C) and secure with the
four screws.
• Attach the centerpiece (C) to the spacer
pole (E) by twisting clockwise.
• Install the GS Solar LED Bulb into the top.
• Move the operation switch to your
desired setting.
• Attach the top (A) to the fixture (B) and
secure using the two phillips head screws.
• Attach the lamp head to the centerpiece
(C) by twisting clockwise.
• Repeat this for the second lamp head.
• Insert the GS Solar LED Bulb into the top (A) by twisting
clockwise.
• Move the operation switch to the Low or High position
according to your preferences:
- Low = Softer light and longer duration
- High = Brighter light output
• The solar Lamp will automatically operate at dusk
Replacement Batteries and Bulbs are available at
www.gamasonic.com
or via our Toll Free number: [phone].
Your Lamp can use the following bulbs:
C37WW10W – included bulb with Warm White LEDs (2700K)
C37BW10W – bulb with Bright White LEDs (6000K)
F30WW05W – included Flame bulb with simulated flame LEDs
T45WW10W – Edison LED Bulb with Warm White LEDs (2700k)
Your lamp uses two of the following battery:
GS32V30

Replacing the Batteries
(each lamp head has its own set of batteries)
After several years of use, the battery may need replacing.
1. Remove the lamp from the wall bracket (C) by twisting it counterclockwise.
2. Remove the top (A) from the fixture (B) by removing the two phillips head screws.
3. Switch the lamp OFF and remove the bulb.
4. Remove the battery compartment cover screw and the cover.
5. Remove and unclip the battery.
6. Make sure the new battery is a high quality Li-Ion 3.2V/3000mAh battery with
a matching connector (item GS32V30).
7. Clip in the new battery and install it in the compartment.
8. Replace the battery compartment cover and secure with the screw.
9. Repeat steps 4-8 for the other battery compartment.
10. Install the bulb and switch the lamp on to your desired setting.
11. Attach the top (A) to the fixture (B) and secure with the two phillips head screws.
12. Attach the lamp to the wall bracket (C) by twisting clockwise.
13. Repeat these steps for the other lamp head.
Maintenance
Clean the solar panels regularly with a damp towel to guarantee optimum performance. Do not
use any type of solvent for cleaning and be careful not to put too much pressure on the solar
panels while cleaning.
Troubleshooting
If your solar light does not come on as expected despite observance of all the instructions,
please try the following steps:
1. Make sure that the solar lamp is not being affected by any other light source.
2. Ensure the solar lamp is not positioned in the shade during the day.
3. Check that the batteries are installed correctly.
NOTE: The performance of the solar lamp will vary with the time of year. It will last longer
when it has had a full day in the sun rather than a day in overcast weather.
WINTERTIME TIPS: For optimal performance, be sure to remove any snow or debris
accumulation from solar panel(s). A solar panel free of debris will charge the batteries much
more efficiently.
WARNING: Please keep out of reach of children. Do not dispose of the Li-Ion battery in the regular trash,
municipal waste stream or by fire as batteries may leak or explode. Do not open, short circuit, or mutilate
batteries as injury may occur. Preserve our environment by recycling Li-Ion batteries or disposing of them in
accordance with local, State and federal regulations. Do not mix old and new batteries.
page 4
SOLAR
SOLAR
SOLAR
SOLAR ENERGY
ENERGY
ENERGY
ENERGY
Replacement Batteries and Bulbs are available at
www.gamasonic.com