Gama Sonic 98B001 User manual

Royal Bulb Solar Lamp
Part #: 98B001, 98B101, 98B301, 98B102, 98B302, 98B303
Version 1.1
Instruction Manual
US Patent #7172307, 9458970

What's in the Box
page 2
Thank you for your purchase! GAMA SONIC®solar charged lights are brighter and last
all night with a typical solar charge. Unique design, superior light output and numerous
installation options confirm the outstanding value of our product. GAMA SONIC®has
been recognized as a worldwide leader in the lighting industry for over 20 years.
Technical Assistance/Warranty Claims/Replacement Parts
Toll Free Number: [phone] (only within the US) or www.gamasonic.com
Visit our website or download the latest version of your instruction manual:
www.gamasonic.com or www.gamasonic.com/user-guides
Please read the instruction manual carefully to obtain the best results from your purchase.
Gama Sonic’s patented Bulb
technology gives your solar lamp
the look and feel of a traditional
incandescent lamp. This helps to
distribute light further than
traditional solar lamps.
Bulb(s)
Concrete
Anchors
98B001
98B101
98B301
98B102
98B302
98B303
For optimum light duration
throughout the night, it is very
important to mount your solar
lamp in a spot where it will receive
the maximum amount of direct
sunlight throughout the day.
For best results, the solar
light must be
charged in the
“ON” position
(High or Low) for
at least 2 days
of full direct
sunlight.
Gama Sonic's Bulb Technology
Solar Lamp Location
A
B
C
D
E
F
G
HIJ
EBulb
Hardware
C D
A B
98B012, 98B112,
98B312 only
98B011, 98B111,
98B311 only
98B010, 98B110,
98B310 only

Assembly Instructions
Replacement Parts
Operation Instructions
(follow these instructions for each lamp head)
page 3
98B001/98B101/98B301
1. Using the provided template, mark and drill three holes
into concrete no larger than the provided anchors.
NOTE: For installation in the ground where pouring
concrete is not preferred or possible, use our EZ Lamp
Post Anchor, model 30001 (sold separately) to quickly
and easily secure the lamp anywhere in your yard.
This is only to be used with models 98B001, 98B101, or
98B301.
2. Place the anchors into the holes with the threaded
ends facing up.
3.
Place the Base Pole (G) over the anchors and secure
using a wrench. Cover the nuts with the provided
plastic covers.
4.
Place the middle pole (F) on top of the base pole (G)
and secure with the provided screws.
5. Attach the top pole (E) to the middle pole (F) by
twisting clockwise.
6. Attach the fitter adapter (D) to the top pole (E) by
twisting clockwise.
NOTE: the fitter adapter (D) may be installed in the
fixture (C) in the box.
7. Attach the fixture (C) to the fitter adapter (D) and
secure with the three set screws.
NOTE: Be sure to not overtighten the set screws.
98B102/98B302/98B303
1. Using the provided template, mark and drill three holes
into concrete no larger than the provided anchors.
2. Place the anchors into the holes with the threaded
ends facing up.
3. Place the Base Pole (G) over the anchors and secure
using a wrench. Cover the nuts with the provided
plastic covers.
4. Place the middle pole (F) on top of the base pole (G)
and secure with the provided screws.
5. Attach the top pole (E) to the middle pole (F) by
twisting clockwise.
6. Remove the cap to the centerpiece (H/I) by removing
the three small screws.
7. Insert the fixture with arm (J) into the centerpiece (H/I)
and secure the threaded rod from the inside using the
nut.
8. On the outside secure the fixture with arm (J) using
the provided screw.
9. Repeat these steps to secure the second and/or third
fixture with arm to the centerpiece (H/I).
10. Place the cap back on the centerpiece (H/I) and secure
with the three screws.
11. With the help of another person, place the assembly
of lamp heads and centerpiece (H/I) on the top pole (E)
and twist clockwise until fully attached to the pole.
Replacement Batteries and Bulbs are available
at www.gamasonic.com or via our Toll Free
number: [phone].
Your Lamp can use the following bulbs:
A50WW10W – included bulb with Warm White
LEDs (2700K)
A50BW10W – bulb with Bright White LEDs
(6000K)
F30WW05W – Flame bulb with simulated flame
LEDs
T45WW10W – Edison LED Bulb with Warm
White LEDs (2700k)
Your Lamp uses two of the following battery:
GS32V30
1. Remove the two screw caps from the top (B).
2. Install the GS Solar LED Bulb into the lamp by
holding it at the base and turning clockwise.
3. Turn the operation switch to your desired setting:
Low = Softer light output and longer duration
High = Brighter light output
4. Place the top (B) back on the fixture and secure
with the two screw caps.
5. Install the finial (A) into the top (B) by twisting
clockwise.

Replacing the Batteries
(each lamp head has its own set of batteries)
After several years of use, the batteries may need replacing.
1. Remove the top (B) by unscrewing the two screwcaps.
2. Switch the unit OFF and remove the bulb.
3. Remove the screw and battery compartment cover.
4. Unclip and remove the battery.
5. Replace with a high quality Li-Ion 3.2V/3000mAh battery
with matching connector (Item GS32V30).
6. Install the battery in the compartment and secure the
cover with the screw.
7. Repeat steps 3-6 for the second battery compartment.
8. Install the bulb and switch the unit ON to your desired
setting.
9. Place the top (B) back on the fixture and secure with the
two screw caps.
Maintenance
Clean the solar panels regularly with a damp towel to guarantee optimum performance. Do not
use any type of solvent for cleaning and be careful not to put too much pressure on the solar
panels while cleaning.
Troubleshooting
If your solar light does not come on as expected despite observance of all the instructions, please try
the following steps:
1. Make sure that the solar lamp is not being affected by any other light source.
2. Ensure the solar lamp is not positioned in the shade during the day.
3. Check that the batteries are installed correctly.
NOTE: The performance of the solar lamp will vary with the time of year. It will last longer when it has
had a full day in the sun rather than a day in overcast weather.
WINTERTIME TIPS: For optimal performance, be sure to remove any snow or debris
accumulation from solar panel(s). A solar panel free of debris will charge the batteries much
more efficiently.
WARNING: Please keep out of reach of children. Do not dispose of the Li-Ion battery in the regular trash,
municipal waste stream or by fire as batteries may leak or explode. Do not open, short circuit, or mutilate
batteries as injury may occur. Preserve our environment by recycling Li-Ion batteries or disposing of them in
accordance with local, State and federal regulations. Do not mix old and new batteries.
page 4
Replacement Batteries and Bulbs are available at
www.gamasonic.com