Garden Oasis Adirondack M32923 User manual

Adirondack Chair - Blue / White / Natural / Red
Product Code:
KSN:
UPC Code:
Date of Purchase: ___/ ___/ ___
D71 M32926
191071000089
M32923 / M32924 / M32925 /
02036222-4 /
191071000072 / 191071000065 /
02036173-9 / 02036220-8 /
191071000096 /
02036223-2

Thank you for your purchase
Thank you for your purchase!
.
We are pleased that you have chosen Sears for your outdoor furniture
purchase We hope that you enjoy the unmatched quality comfort and
style of your new patio set Every piece is meticulously considered all the
way down to the smallest details exclusively for you by our world class
design team We know you have a choice when it comes to your patio
furniture needs so from our team to yours thank you for letting us be a part
of your outdoors
. , ,
., ,
., ,
Table of Contents
Table of Contents
Safety Information
Warranty
Pre-Assembly
Assembly Instructions
Customer Service
...............................
..............................
Set Up Your Furniture Properly.........
Examine Your furniture.....................
..............................................
What is Covered...............................
What is Not Covered........................
Care and Maintenance.........................
......................................
Planning Asembly..............................
Hardware Included............................
Observe weight Limits.......................
Package Content..............................
........................
...............................
2
3
3
3
3
4
4
4
5
5
5
5
6
7-10
11
2

Safety Information
WARRANTY
SET UP YOUR FURNITURE PROPERLY
EXAMINE YOUR FURNITURE
Ensure that all parts are assembled properly and fully tightened as per
the instructions
When placing in the desired location ensure that all legs are resting on
the same surface. You may adjust the leg levelers as needed to ensure
the item stands securely on your surface.
Examine occasionally to ensure that there are no loose parts If loose
parts are found they must be retightened fully before additional use
.,
.
, .
1 YEAR WARRANTY FOR FRAME RESIN WEAVE AND CUSHIONS
WHAT IS COVERED
WHAT IS NOT COVERED
,
WARRANTY
We warrant to the original purchaser for one year from the date of
purchase that the frame resin weave and cushions will be free from
manufacturing defects This warranty also covers peeling, crackling,
blistering discoloration or fading for this one year period
It remains the customers responsibility for freight and packaging
charges to and from our service center This warranty does not cover
commercial use acts of nature, fire, freezing, and abusive use.
Discoloration or fading of the finish or fabrics as a result of chemicals or
spills is not covered Glass tabletop breakage and corrosion or rusting of
hardware are not covered In addition purchased parts are not covered
under this warranty Proof of purchase (dated register receipt) is
required for warranty claims We reserve the right to make substitutions
with similar merchandise if the model is no longer in production.
Warranty is to the original purchaser and is not transferable As some
states do not allow exclusions or limitations on an implied warranty the
above exclusions and limitations may not apply This warranty gives you
specific rights but you may also have other rights which will vary from state
to state
This limited warranty is extended to the original purchaser and applies to
defects in material and workmanship of your patio furniture, provided your
furniture is maintained with care and used only for personal, residential
purposes.
,
, ,
.
, , .
.
,
.. ,
..
,.,
.
,
.
'
3

Warranty
Cushions are covered for a period of one (1) year against defects in
material or workmanship.
Frames are warranted to be free from defects in material or workmanship
for a period of one (1) year
Exclusions: items used for commercial, contract, or other nonresidential
purposes or items damaged due to acts of nature vandalism
misuse or improper assembly is not covered Discoloration and fading
of the finish or fabrics as a result of chemicals or spills are not covered
Glass table top breakage and corrosion or rusting of hardware are not
covered If within the stated warranty period this product is found to be
defective in material or workmanship the purchaser must contact the
manufacturer's customer service department The manufacturer at
its option will repair or replace the defectives parts Proof of purchase
date register receipt is required for warranty claims It remains the
customer's responsibility to pay for freight and packing charges to and
from the service center Warranty is to the original purchaser and is
nontransferable
Any replacement of warranted items will be in the original
style and color or a similar style and color if the original is unavailable
or has been discontinued As some states do not allow exclusions or
limitations on an implied warranty the above exclusions and limitations
may not apply This warranty gives you specific rights but you may also
have other rights which will vary from state to state
Care instructions: protecting furniture from the elements, when not in
use is highly recommended Wipe frame with a lightly damp cloth and
dry completely do not use bleach or solvents Wash cushions with mild
solution of soap and water rinse thoroughly Do not machine wash
Customer service 1-800-585-9969
.
, , ,
, .
,
,. ,
, .
.
)
.
.
( .
.
.
,
.
,
. ,
.
.
, .
, .
Care and Maintenance
Wipe clean with damp cloth
Cushions may also be cleaned by hand with a mild solution of soap and
water Rinse the cushion cover thoroughly and allow to drip dry The
back cushion and pillow should be spot cleaned with a soft cloth Do not
machine wash or tumble dry as cushions may shrink Do not use bleach
or solvents on fabrics Never use cleaners that contain acid or abrasive
materials
Use and operation To improve the lifespan of this furniture cover when
not use and store in a dry place in the off season
. .
.
.
.
.
,
.
:
4

Pre-Assembly
PLANNING ASSEMBLY
To prevent damage place all parts on a soft surface during assembly
Remove all protective caps before beginning assembly It takes about
20 minutes for two people to complete all the assembly
The recommended weight limits for the following products are listed below
Table 220 lbs
, .
.
.
:
:
OBSERVE WEIGHT LIMITS
CAUTION:If you overload your
furniture,injuries can occur.
HARDWARE INCLUDED
NOTED:. Hardware not shown
to actual size
Part Description Size Qty.
_AA _BB
AA BOLTS
( 15 x M8 x 50 mm)
6
_CC _DD _EE _FF
_GG _HH _II _JJ
BB BOLTS
( 12.7 x M6 x 80 mm)
2
CC BOLTS
( 12.7 x M6 x 35 mm)
2
DD LOCK NUT
( 13 x M8 x 8 mm)
6
EE WASHER
( 18 x M8 x 1 mm)
16
FF WASHER PLASTIC
( 25 x M9 x 3 mm)
2
GG WASHER PLASTIC
( 35 x M9 x 3 mm)
6
HH WASHER PLASTIC
( 35 x M19 x 3 mm)
2
II WRENCH
( 13 mm)
1
JJ ALLEN WRENCH
( 4 mm)
1
_KK
KK SCREW
( 6 X 1” )
4
5

Pre-Assembly (continued)
Package Contents
Safety Information
1 EVERY BOLT NEEDS TO BE USED.
2 DO NOT FULLY TIGHTEN BOLTS UNTIL INDICATED IN STEP 2
.. .
6
A
B
E
F
G
C
D
H
H
PART DESCRIPTION QUANTITY
ABACK REST 1
BSEAT 1
CLEFT LEG 1
DRIGHT LEG 1
ELEFTARM 1
FRIGHTARM 1
GWOOD SLAT 1
HWOOD HINGE 2

Assembly Instructions
Attaching the legs and wood slat
7
ATTACH THE LEGS ”C”AND “D”, TO THE ASSEMBLY SEAT “ B ”, FASTEN TWO BOLT “AA”, WASHER “EE”,
WASHER PLASTIC “GG”, WASHER “EE”AND LOCK NUT “DD”.TIGHTEN HALF THE WAY USING ALLEN WRENCH “JJ”.
AND WRENCH “II”.
ATTACH THE WOOD SLAT “G”, TO THE LEG “C” AND “D” FASTEN FOUR SCREW “KK”,
WEARING A SCREWDRIVER
G
GG
EE
AA
II DD EE
JJ
B
C
D
KK
C
D
_AA _GG
_DD _EE _II _JJ
X2 X2 X4 X2 X1 X1 _KK X4

Assembly Instructions
Attaching the wood hinge and back rest
ATTACH THE WOOD HINGE ”H”, TO THEASSEMBLY SEAT “ B ”, FASTEN TWO BOLT “AA”, WASHER “EE”, WASHER
PLASTIC “GG”, WASHER “EE” AND LOCK NUT “DD”. TIGHTEN HALF THE WAY USING ALLEN WRENCH “JJ”.
WRENCH “II”.
ATTACH THE ASSEMBLY BACK REST “A”, TO THE WOOD HINGE “H”, FASTEN TWO BOLT “CC”, WASHER “EE”,
AND WASHER “HH”, TIGHTEN HALF THE WAY USING ALLEN WRENCH “JJ”.
8
A
B
G
C
D
H
H
H
H
D
CG
II DD EE
GG
EE AA
JJ
HH EE CC
JJ
_AA _CC _GG
_DD _EE _II _JJ
X2 X2 X2 X6 X2 X1 X1

9
Assembly Instructions
Attaching the arm
ATTACH THE ARM ”E,F”, TO THE LEFT LEG “ C ”, FASTEN TWO BOLT “AA”, WASHER “EE”, WASHER
PLASTIC “FF”, WASHER “EE” AND LOCK NUT “DD”. TIGHTEN HALF THE WAY USING ALLEN WRENCH “JJ”.
WRENCH “II”.
ATTACH THE ARM “E,F”, TO THE BACK REST “A”, FASTEN TWO BOLT “BB”, WASHER “EE”,
AND WASHER PLASTIC “GG”, TIGHTEN HALF THE WAY USING ALLEN WRENCH “JJ”.
_AA _GG
_DD _EE _II _JJ
X2 X2 X6 X2 X1 X1
JJ
BB EE
GG
II DD EE
FF
EE AA JJ

10
Assembly Instructions
LIFT UP THE BACKREST AND PUSH THE BOTTOM OF THE BACK BACKWARD

Customer Service
HOME OFFICE: PT. INTERTREND UTAMA
JL. Industri No.28 Buduran – Sidoarjo
Phone : [phone]
Fax : [phone]
Email: [e-mail]
11

Please refer to part numbers when reordering
For questions or comments about product:
Email: marketing[email protected]
Made in / Hech en INDONESIA
Ditributed by sears, Roebuck and co., Hoffman Estates, IL 60179
See our extensive assortment of outdoor living products
on-line at www sears com and www.kmart com. . .