Garden Oasis EMERY D71 M20351 User manual

1
Date of purchase: _____/ _____/ _____
EMERY 7 PCS DINING SET-RED
Product code: D71 M20351
UPC code: 471 333112 222 3
Vendor Item: SC-K-429N-1S/6-R
USE AND CARE GUIDE

2
Thank you for your purchase
Thank you for your purchase
We are pleased that you have chosen Sears for your outdoor furniture purchase.
We hope that you enjoy the unmatched quality, comfort, and style of your new patio
set. Every piece is meticulously considered all the way down to the smallest details,
exclusively for you, by our world class design team. We know you have a choice when
it comes your patio furniture needs, so from our team to yours, thank you for letting us
be a part of your outdoors.
Table of Contents
Table of Contents.................................... 2
Safety Information................................... 3
Set Up your Furniture Properly..............3
Examine your furniture..........................3
Warranty................................................... 3
Care and Maintenance............................ 4
Pre-Assembly.......................................... 4
Planning Assembly.............................. 4
Observe weight Limits......................... 4
Hardware Included.............................. 4
Assembly Instructions
Package Contents................................. 5
Chair....................................................... 6
Swivel......................................................7
Customer Service..................................8

Safety Information
SET UP YOUR FURNITURE PROPERLY
Ensure that all parts are assembled properly and fully tightened as per the instructions.
When placing in the desired location, ensure that all legs are resting on the same
surface. You may adjust the legs levelers as required to ensure that the item stands
in a rigid position.
EXAMINE YOUR FURNITURE
Examine occasionally to ensure that there are no loose parts. If loose parts are found,
they must be retightened fully before additional use.
Warranty
WARRANTY
We warrant our products to be free of manufacturing defects to the original purchaser for
the period listed below. We reserve the right to make substitutions with similar merchandise,
if the model in question is no longer in production.
EXCLUSIONS
This warranty does not cover: Furniture used for commercial or non-residential purposes;
failures caused by improper care; unreasonable or abusive use; freeze damage; acts of
nature. Steel products are not covered against rust. Tempered glass table tops are not
covered against breakage.
FINISH
Frame finish is warranted to be free of manufacturing defects for a period of one (1) year.
Discoloration or fading of the finish as a result of exposure to the elements, chemicals, or
spills is not covered.
FABRIC
Fabric is warranted to be free of manufacturing defects for a period of one (1) year.
Discoloration or fading of the finish as a result of exposure to the elements, chemicals, or
spills is not covered.
FRAMES
Frame is warranted to be free from defects in material or workmanship for a period of
two (2) years for steel frame.
FREIGHT & PACKAGING
Freight and packaging are the responsibility of the original purchaser.
CUSTOMER SERVICE
In case of a problem, call
1-800-457-4652
between 9:00 am to 5:00 pm Eastern standard
time Monday through Friday or contact us at www.numarkcustomerservice.com
for
any question or problems you may have.
3

Ga (1)
Assembly
Instructions Sheet
Care and Maintenance
Read through all the instructions before beginning assembly. Unpack and identify all the parts.
Place them on a flat, non-abrasive surface. Assembly by two people is recommended.
PLANNING ASSEMBLY
Though its powder-coated finish is rust-resistant, steel is prone to rust over time with
exposure to the elements. In case of rust or scratches, lightly sand the affected area
and apply touch-up paint. To maintain the finish periodically apply wax with a soft cloth.
Wash frames and cushions with a mild solution of soap and water; rinse thoroughly.
Dry completely and drip-dry cushions. Do not use bleach or solvents.
OBSERVE WEIGHT LIMITS
The recommended weight limits for the following products are listed below:
Chair: 225 lbs
CAUTION: If you overload your
furniture, injuries can occur.
Swivel: 225 lbs
HARDWARE INCLUDED
NOTED: Hardware not shown
to actual size.
4
Pre-Assembly
Safety Information
Do not completely tighten bolts and nuts until indicated in assembly step.

1
5
A Chair Frame
E Seat Cushion
F Back Cushion
ITEM DESCRIPTION QUANTITY
4
4
4
Repeat procedure for the remaining three chairs.
E
F
A
A
E
F
Package Contents
Assembly Instructions
Putting the cushion onto the chair frame

6
D
C
B
E
F
B Swivel Top
C Center Post
D Swivel Base
E Seat Cushion
F Back Cushion
2
2
2
2
2
ITEM DESCRIPTION QUANTITY
Package Contents
Assembly Instructions

Push the center post (C) down firmly and twist it left and
right as necessary.
2
7
C
D
B
C
D
1Inserting the center post into the swivel base
Assembly Instructions
Pushing the swivel top to the center post

3
Repeat procedure for the other swivel chair.
Your cushion chairs and swivels are now ready to use.
E
F
Putting the cushion onto the swivel frame
Assembly Instructions
8
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
Made in / Hecho en CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
For questions or comments about product:
Call toll-free: 1-
800-457-4652
Please refer to part numbers when reordering
between 9:00 am to 5:00 pm Eastern standard time Monday through Friday
or contact us at www.numarkcustomerservice.com

Date of purchase: _____/ _____/ _____
EMERY 7 PCS DINING SET-RED
Product code: D71 M20351
UPC code: 471 333112 222 3
1
Vendor Item: SC-K-429N-1T-R
USE AND CARE GUIDE

2
Thank you for your purchase
Thank you for your purchase
We are pleased that you have chosen Sears for your outdoor furniture purchase.
We hope that you enjoy the unmatched quality, comfort, and style of your new patio
set. Every piece is meticulously considered all the way down to the smallest details,
exclusively for you, by our world class design team. We know you have a choice when
it comes your patio furniture needs, so from our team to yours, thank you for letting us
be a part of your outdoors.
Table of Contents
Table of Contents.................................... 2
Safety Information................................... 3
Set Up your Furniture Properly..............3
Examine your furniture..........................3
Warranty................................................... 3
Care and Maintenance............................ 4
Pre-Assembly.......................................... 4
Planning Assembly.............................. 4
Observe weight Limits......................... 4
Hardware Included.............................. 4
Assembly Instructions
Package Contents................................. 5
Table....................................................... 6
Customer Service..................................7

Safety Information
SET UP YOUR FURNITURE PROPERLY
Ensure that all parts are assembled properly and fully tightened as per the instructions.
When placing in the desired location, ensure that all legs are resting on the same
surface. You may adjust the legs levelers as required to ensure that the item stands
in a rigid position.
EXAMINE YOUR FURNITURE
Examine occasionally to ensure that there are no loose parts. If loose parts are found,
they must be retightened fully before additional use.
Warranty
WARRANTY
We warrant our products to be free of manufacturing defects to the original purchaser for
the period listed below. We reserve the right to make substitutions with similar merchandise,
if the model in question is no longer in production.
EXCLUSIONS
This warranty does not cover: Furniture used for commercial or non-residential purposes;
failures caused by improper care; unreasonable or abusive use; freeze damage; acts of
nature. Steel products are not covered against rust. Tempered glass table tops are not
covered against breakage.
FINISH
Frame finish is warranted to be free of manufacturing defects for a period of one (1) year.
Discoloration or fading of the finish as a result of exposure to the elements, chemicals, or
spills is not covered.
FABRIC
Fabric is warranted to be free of manufacturing defects for a period of one (1) year.
Discoloration or fading of the finish as a result of exposure to the elements, chemicals, or
spills is not covered.
FRAMES
Frame is warranted to be free from defects in material or workmanship for a period of
two (2) years for steel frame.
FREIGHT & PACKAGING
Freight and packaging are the responsibility of the original purchaser.
CUSTOMER SERVICE
In case of a problem, call
1-800-457-4652
between 9:00 am to 5:00 pm Eastern standard
time Monday through Friday or contact us at www.numarkcustomerservice.com
for
any question or problems you may have.
3

Ee (1)
Assembly
Instructions Sheet
Ea (1 spare)
Bolt
Eb (1)
Allen Wrench
Ec (8 spares)
Thicker Tile Bumper
Ed (6 spares)
Thinner Tile Bumper
Care and Maintenance
Pre-Assembly
Read through all the instructions before beginning assembly. Unpack and identify all the parts.
Place them on a flat, non-abrasive surface. Assembly by two people is recommended.
PLANNING ASSEMBLY
Though its powder-coated finish is rust-resistant, steel is prone to rust over time with
exposure to the elements. In case of rust or scratches, lightly sand the affected area
and apply touch-up paint. To maintain the finish periodically apply wax with a soft cloth.
OBSERVE WEIGHT LIMITS
The recommended weight limits for the following products are listed below:
Table: 100 lbs
CAUTION: If you overload your
furniture, injuries can occur.
4
HARDWARE INCLUDED
NOTED: Hardware not shown
to actual size.
Tabletop ceramic tiles must be stored during fall and winter months in a dry location
where temperatures will not fall below 32°F (0°C).Always use an umbrella base to
secure umbrella.Ensure the “o” ring is in place in the umbrella hole in the
glass top before inserting umbrella. Make sure umbrella is in the closed
position when not in use and during high winds.Use furniture covers or store
indoors during cold or inclement weather.

5
A Table Rim (8 Metal Washers and 8 Bolts attached)
B Metal Center Ring
C Metal Leg (1 Metal Washer and 1 Bolt attached for each)
D Tile
ITEM DESCRIPTION QUANTITY
1
1
4
14 + 1 spare
B
D
C
C
A
C
C
Safety Information
Do not completely tighten bolts and nuts until indicated in assembly step.
Pre-Assembly
Assembly Instructions
Package Contents

6
1
Don’t tighten completely.
Repeat procedure for the other three legs.
2
Ea x 8
Bolt
(remove from the table rim)
Metal Washer x 8
(remove from the table rim)
Don’t tighten completely.
Repeat procedure for the other three legs.
Ea x 4
Bolt
(remove from the leg)
Metal Washer x 4
(remove from the leg)
A
C
Ea
Ea
B
C
Assembly Instructions
Attaching the leg to the table rim
Attaching the metal center ring to the leg

Your table is ready for use.
Using tile bumper to adjust tabletop level if it needs.
3
7
D
Turn over the whole table and keep flat.
Securely tighten all bolts diagonally.
Ed
Ec
A
4
Assembly Instructions
Putting the tiles into the table rim
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
Made in / Hecho en CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
For questions or comments about product:
Call toll-free: 1-
800-457-4652
Please refer to part numbers when reordering
between 9:00 am to 5:00 pm Eastern standard time Monday through Friday
or contact us at www.numarkcustomerservice.com