Garden Oasis D71 20558 User manual

USE AND CARE GUIDE
3 SEAT SWING WITH CANOPY
Product Code: D71 20558
KSN: 0-08803510-0
UPC Code: 095454822442
Date of Purchase: _____/ _____/ _____

Thank you for your purchase
of your outdoors.
We are pleased that you have chosen Sears for your outdoor furniture
purchase. We hope that you enjoy the unmatched quality, comfort, and
style of your new patio set. Every piece is meticulously considered all the
way down to the smallest details, exclusively for you, by our world class
design team. We know you have a choice when it comes to your patio
furniture needs, so from our team to yours, thank you for letting us be a part
Thank you for your purchase!
2
Table of Contents
Table of Contents ................................
Safety Information ...............................
3
Set Up our Furniture Properly............3
Examine your furniture......................
Warranty...............................................
What is Covered................................
What is Not Covered.........................
Care and Maintenance ........................
Pre-Assembly........................................
Planning Assembly............................
Hardware Included............................
Observe weight Limits.......................
Package Contents.............................
Assembly Instructions
Customer Service..................................
3
4
4
4
4
5
5
5
5
6
7-8
9
.......................
2

1 YEAR WARRANTY FOR FRAME, RESIN WEAVE AND CUSHIONS
WHAT IS COVERED
We warrant to the original purchaser for one year, from the date of
purchase, that the frame, resin weave and cushions will be free from
manufacturing defects. This warrant also covers peeling, crackling,
blistering, discoloration, or fading for this one year period.
WHAT IS NOT COVERED
It remains the customer's responsibility for freight and packaging
charges to and from our service center. This warranty does not cover
commercial use, acts of nature, fire, freezing, and abusive use.
Discoloration or fading of the finish or fabrics as a result of chemicals or
spills is not covered. Glass tabletop breakage and corrosion or rusting of
hardware are not covered. In addition, purchased parts are not covered
under this warranty. Proof of purchase (dated register receipt) is
required for warranty claims. We reserve the right to make substitutions
with similar merchandise, if the model is no longer in production.
Warranty is to the original purchaser and is not transferable. As some
states do not allow exclusions or limitations on an implied warranty, the
above exclusions and limitations may not apply. This warranty gives you
specific rights, and you may also have other rights, which vary from state
to state.
WARRANTY
3
residential purposes.
This limited warranty is extended to the original purchaser and applies to
defects in material and workmanship of your Patio furniture, provided
your furniture is maintained with care and used only for personal,
Resin wicker is warranted to be free from defects in material or
workmanship for a period of one (1) year.
Warranty
Safety Information
Ensure that all parts are assembled properly and fully tightened as per
the instructions.
When placing in the desired location, ensure that all legs are resting on
the same surface. you may adjust the legs levelers as required to
ensure that the item stands in a rigid position.
SET UP YOUR FURNITURE PROPERLY
EXAMINE YOUR FURNITURE
Examine occasionally to ensure that there are no loose parts. If loose
parts are found, they must be retightened fully before additional use.

Warranty
Cushions are covered for a period of one (1) year against defects in
Frames are warranted to be free from defects in material or
workmanship for a period of one (1) year.
material or workmanship.
Exclusions: items used for commercial, contract, or other non-
residential purposes, or items damaged due to acts of Nature, vandalism,
misuse, or improper assembly is not covered. Discoloration and fading
of the finish or fabrics as a Result of chemicals or spills are not covered.
Glass table top breakage and corrosion or rusting of hardware is not
Covered. If, within the stated warranty period, this product is found to be
defective in material or workmanship, the Purchaser must contact the
customer service department at 1-800-327-2978. The manufacturer, at
its option, will repair Or replace the defectives parts. Proof of purchase
(date register receipt) is required for warranty claims. It remains The
customers responsibility to pay for freight and packing charges to and
from the service center. Warranty is to The original purchaser and is non-
transferable. Any replacement of warranted items will be in the original
style and Color, or a similar style and color if the original is unavailable
or has been discontinued. As some states do not allow exclusions or
limitations on an implied warranty, the above exclusions and limitations
may not apply. This warranty Gives you specific rights, and you may also
Care instructions: protecting furniture from the elements, when not in
use is highly recommended. Wipe frame With a lightly damp cloth and
dry completely, do not use bleach or solvents. Wash cushions with mild
solution Of soap and water, rinse thoroughtly. Do not machine wash.
Customer service 1-800-327-2978
Care and Maintenance
Wash the frame with a mild solution of soap and water, rinse with clean
Cushions may also be cleaned by hand with a mild solution of soap and
water. Rinse the cushion cover thoroughly and allow to drip dry. The
back cushion and pillow should be spot cleaned with a soft cloth. Do not
machine wash or tumble dry, as cushions may shrink. Do not use bleach
or solvents on fabrics. Never use cleaners that contain acid or abrasive
Use and operation: To improve the life span of this furniture, cover when
not use and store in a dry place in the off season.
water, and dry thoroughly.
4
Materials.
have other rights, which vary from state to state.

Pre-Assembly
NOTED:Hardware not shown
to actual size.
PLANNING ASSEMBLY
To prevent damage, place all parts on a soft surface during assembly.
Remove all protective caps before beginning assembly. It takes about
90 minutes for two person to complete all the assembly.
HARDWARE INCLUDED
CAUTION:If you overload your
furniture, injuries can occur.
OBSERVE WEIGHT LIMITS
The recommended weight limits for the following products are listed below:
Swing: 600 lbs
15mm
1/4"x80mm
1/4"x50mm
13mm
5/16"x75mm
5/16"x95mm
5/16"x95mm
Locknut
Washer
Locknut Cap
Locknut Cap
Spacer
Allen Wrench
#15 #16 #17 #18 #19
#20 #21 #22 #23
#24 #25 #26 #27
PART
#15
#16
QUANTITY
10
20
DESCRIPTION
#17
#18
8
20
#19
#20
6
2
#21
#22
4
6
#23
#24
4
4
#25
#26
1
2
#27 1
5

Pre-Assembly (continued )
Package Contents
#1 #2
#3 #4
#5 #6
#7 #8
#9 #10
#11 #12
#13 #14
PART
#1
#2
QUANTITY
1
2
DESCRIPTION
#3
#4
R1 / L1
1
#5
#6
2
2
#7
#8
2
#9
#10
1
1
#11
#12
1
4
#13 2
#14 2
R1 / L1
Top Cross Bar
Back Leg Tube
Front Leg Tube
Rear Brace
Side Tube
Canopy Frame
Canopy Side Frame
Armrest
Seat
Seat Cushion
Canopy
Hook
Foot
Adjustment Knob
6

Assembly Instructions
1
#19
#19
#19
#13
#13
#9
B
BB
#8-R
#8-L
#1
A
#2
#2
#3-L
#3-R
#4
#5
#5
#19
#19
#19
#19
1. Bring the top end of leg tube #3-L
and #2 together using two
hardware sets A. Do not tighten
the bolts and nuts. Repeat for the
other side #3-R. Attach tube #1 at
both ends to top end of leg tubes
#2 and tighten the bolts and nuts.
(See Fig. 1)
2. Attach rod #5 to leg tube #3-L and
#2 using two 50mm bolts #24 and
two nuts #17. Attach tube #4 to
leg tube #2 using two 80mm bolts
#23 and two nuts #17. Repeat for
the other side. (See Fig. 1)
3. Use four plastic plugs #12 to four
leg tubes end.
#21 #16 #18 #18 #16 #15
HARDWARE SET : A
A
#24
#17
#17
#24 #17 #23
1. Open seat and back #9. Attach
arm #8-R to seat frame using two
hardware sets B and two plastic
washers #19. Attach arm #8-R to
back frame using a hardware set
B, and a plastic washer #19. (See
Fig. 2)
2. Hook spring #13 at the top of arm
#8-R.
3. Repeat for the other arm #8-L.
HARDWARE SET : B
#22 #16 #18 #18 #16 #15
2
7

#6 #7
#6
#6
#7
#7
Fig. 3b
2. First, attach a tube #7 on to the
main frame using a 95mm bolt #20
and a knob #14 to connect with top
end of leg tube #3-R, and then insert
two tubes #6 into ends of tube #7.
Finally attach other tube #7 to tubes
#6 and using a 95mm bolt #20 and a
knob #14 to connect with top end of
leg tube #3-L. (See Fig. 3b)
3. Hang the seat assembled on both
sides to the corner bracket of tube
#1 using the hooks #13. (See Fig.
1. Attach canopy cover #11 on to
canopy frame using straps to
around the tubes #6 and #7. (See
Fig. 4)
2. Place the cushion #10 on the
seat frame and using straps to
around the back frame.
Your swing is now ready to use.
TIGHTEN BOLTS COMPLETELY
AND VERIFY THAT ALL PARTS
ARE SECURELY FASTENED
BEFORE USE.
#14
#20
#3-R
#7
#7
#7
#6
#6 #11
1. Insert tubes #6 into the sleeves of the
canopy cover #11. Insert both tubes #6
into ends of tube #7. (See Fig. 3a).
Fig. 3a: CANOPY ASSEMBLY
#11
#10
4
3
8
Assembly Instructions (continued )

9
HOME OFFICE: 13033 Arctic Circle, Santa Fe Springs, CA 90670
FAX: [phone]
CUSTOMER SERVICE HOT LINE: 1-800-585-9969
SERVICE HOURS: MONDAY - FRIDAY 8:30 AM - 4:30 PM (EST)
E-MAIL: [email protected]
TSY Services, LLC.
SHINCREST PTE.,LTD.
S H I N
C R E S
T
Customer Service

Please refer to part numbers when reordering
For questions or comments about product:
Call toll-free: 1-800-585-9969 Monday-Friday 8:30AM-4:30PM (Pacific Time)
Email: [e-mail]
Made in / Hecho en TAIWAN
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
10