Garden Treasures DAISY BENCH User manual

ITEM #0247963
DAISY BENCH
MODEL #S-K-140PB
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-643-0067, 8 a.m. - 8 p.m., EST, Monday - Friday.
ATTACH YOUR RECEIPT HERE
Serial Number _________________________ Purchase Date _______________________
Français p. 06
Español p. 11
1

PACKAGE CONTENTS
PART DESCRIPTION QUANTITY
A1
B
Seat
Right Leg 1
C
D
E
Left Leg 1
1
1
HARDWARE CONTENTS (shown to size)
AA
AA AA BB AA CC AA DD AA
EE
M6 x 15 L
Bolt
Qty. 6
+ 1 spare
Nut
Washer
Qty. 7
+ 1 spare
2
AA
FF
Allen
Wrench
Qty. 1 Hex
Wrench
Qty. 1
(not to scale)
(not to scale)
FBack
Right Arm
Left Arm
1
M6 x 22 L
Bolt
Qty. 3
Qty. 9
+ 1 spare
A
B
C
D
E
F

Assemble the item on a soft, non-abrasive surface such as carpeting to avoid damage.
Item is heavy. Use care when handling.
May require two adults for safe assembly.
SAFETY INFORMATION
WARNING
Please read and understand this entire manual before attempting to assemble or install
the product.
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
PREPARATION
ASSEMBLY INSTRUCTIONS
1
1. Attach the left leg (C) to the seat (A).
Line up the holes, insert an M6 x 15 L
bolt (AA) through a washer (CC), through
the left leg (C) and secure into the seat (A)
for each hole. Do not tighten. Repeat the
procedure for the right leg (B).
Hardware Used
M6 x 15 L Bolt x 6
Washer x 6
AA
AA
AC
CC
3
CAUTION
Recommended maximum weight capacity is 400 lbs.
A
A
BC
AA
CC
Estimated Assembly Time: 1 hour
Tools Required for Assembly (included): 1 Allen Wrench and 1 Hex Wrench.

Hardware Used
Nut x 4
AA
DD
4
2. Attach the back (F) to the seat (A).
Line up the holes, insert an M6 x 22 L
bolt (BB) through the back (F), through the
seat (A), through a washer (CC) and secure
with a nut (DD). Do not tighten.
3. Attach the right arm (D) to the back (F) and
the seat (A). Line up the holes and secure
with a nut (DD) for each. Do not tighten.
Repeat the procedure for the left arm (E).
Tighten all bolts. Your bench is ready
for use.
ASSEMBLY INSTRUCTIONS
2
Hardware Used
M6 x 22 L Bolt x 3
Nut
x 3
AA
BB
AA
CC Washer
x 3
AA
DD
3
A
F
BB
CC
DD
F
A
A
F
DD
D
B
F
DD

ONE-YEAR LIMITED WARRANTY
Wash with mild soap. Rinse with water and let air dry.
CARE AND MAINTENANCE
This warranty is extended to the original purchaser and applies to defects in materials and
workmanship of your patio furniture provided your furniture is maintained with care and used only
for personal, residential purposes.
Frames are warranted to be free from defects in material or workmanship for a period of one (1)
year.
Exclusions: Items used for commercial, contract or other non-residential purposes; display
models; items purchased “as is;” or items damaged due to acts of nature, vandalism, misuse or
improper assembly are not covered. Discoloration or fading of the finish or fabrics as a result of
exposure to the elements, chemicals or spills is not covered. Tabletop breakage, corrosion or
rusting of hardware and damage to frames or welds caused by improper assembly, misuse or
natural causes are not covered.
If within the stated warranty period a product is found to be defective in material or workmanship,
the purchaser must contact the manufacturer’s customer service department at 1-800-643-0067.
The manufacturer, at its option, will repair or replace the defective parts.
Warranty is to the original purchaser and is non-transferable. Any replacement of warranted items
will be in the original style and color or a similar style and color if the original is unavailable or has
been discontinued. As some states do not allow exclusions or limitations on an implied warranty,
the above exclusions and limitations may not apply. This warranty gives you specific rights, and
you may also have other rights which vary from state to state.
5
Printed in China

6

7

9

10

11

12