Garden Treasures GSS00133B User manual

ITEM #0511265
MODEL #GSS00133B
2-SEAT
SLING SWING
Français p. XX
Español p. XX
1
Français p. 11
Español p. 21
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-643-0067, 8 a.m. - 8 p.m., EST, Monday – Friday.
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
Lowes.com/gardentreasures
EB13529

O
N
A
H
BE
I
F
G
D
K
J
M
C
L
PACKAGE CONTENTS
2
YTITNAUQNOITPIRCSEDTRAP
A Top frame bar 1
B Front leg 2
C Back leg 2
D Back crossbar 1
E Leg crossbar 2
F Arm 2
G Sling seat 1
H Sling back 1
I
Short hanging bar 2
J
Long hanging bar 2
K
Magazine bag 2
L
Canopy side bar
2
M
Side support canopy
2
crossbar
N
Support canopy crossbar
3
O
Canopy
1
YTITNAUQNOITPIRCSEDTRAP
Lowes.com/gardentreasures
Foot Cap 4
“S” Hook 2
Knob 2
P
P
Q
Q
R
R

HARDWARE CONTENTS (not shown actual size)
3
AA
JJ KK LL MM
CC DD EE FF GG HH II
M5 x 30 mm
Bolt
Qty. 12 M8 x 45 mm
Bolt
Qty. 4
M6 Nut
Qty. 12
M8 Nut
Qty. 4
M8 x 95 mm
Bolt
Qty. 4
M6 x 45 mm
Bolt
Qty. 8
M6 x 50 mm
Bolt
Qty. 4
M6 x 75 mm
Bolt
Qty. 4
M6
Washer
Qty. 28 Allen
Wrench
Qty. 2
Open
Hex
Wrench
Qty. 2
Plastic
Washer
Qty. 4
M8
Washer
Qty. 12
Lowes.com/gardentreasures
BB

WARNING
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble or install the product.
4
•
Assemble the swing on a soft, non-abrasive surface, such as carpeting, to avoid damage.
• The swing is heavy. Handle with care.
• Two adults may be needed to assemble this product.
CAUTION
• Recommended maximum sitting weight for the swing is 500 Ibs.
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 2hours
Tools Required for Assembly (included): 2 Allen Wrenches,
2 Open Hex Wrench.
PREPARATION
Lowes.com/gardentreasures

ASSEMBLY INSTRUCTIONS
5
FRAME ASSEMBLY
Hardware Used
M8 x 95 mm Bolt
M8 Washer
x 4
x 8
GG
KK
1. Align the two holes at the top of one front leg (B) with
the two holes at one end of the top frame bar (A).
Insert an M8 x 95 mm bolt (GG) through an M8 washer
(KK), through a leg hole and through top frame bar
(A). Align a back leg (C) on the other side of the top
frame bar (A) and continue the bolt through the back
leg (C), through another M8 washer (KK) and into an
M8 nut (II). Do not tighten completely. Repeat this
procedure for the adjacent hole and to attach the other
two legs at the other end of the top frame bar (A).
GG
KK KK
II
A
B C
1
2. Attach the foot caps (R) to both front legs (B) and
back legs (C).
2
Hardware Used
M6 x 50 mm Bolt
M6 Washer
x 4
x 8
DD
JJ
3. Align the two holes of a leg crossbar (E) with the holes
on the front leg (B) and back leg (C) at one end of the
frame. From the outside, insert an M6 x 50 mm bolt (DD)
through an M6 washer (JJ), through the leg crossbar (E),
through the front leg (B), through an
M6 washer (JJ) and
into an M6 nut (HH). Do not tighten completely. Repeat
this procedure for the other three crossbar-to-Ieg
connections.
3
B C
R
DD
JJ
JJ HH
C
E
B
Lowes.com/gardentreasures
M8 Nut x 4
II
M6 Nut x 4
HH

ASSEMBLY INSTRUCTIONS
6
SEAT ASSEMBLY
Hardware Used
M6 x 75 mm Bolt x 4
EE
Hardware Used
M8 x 45 mm Bolt
M8 Washer
x 4
x 4
FF
KK
4. Align the holes of the back crossbar (D) with the
holes in the two back legs (C). For each hole, insert
an M6 x 75 mm bolt (EE) through an M6 washer (JJ),
through a back leg (C), through the back
crossbar (D), through an M6 washer (JJ) and into
an M6 nut (HH). Do not tighten completely.
4
5. Align the two holes in the bottom of an arm (F) with
the holes in the right side of the sling seat (G).
For each hole, insert an M8 x 45 mm bolt (FF) through
an M8 washer (KK), through the arm (F) and into
the sling seat crossbar. Do not tighten completely.
Repeat this procedure on the left side of the sling
seat using the other arm (F). Please follow the front
and back label to assemble the sling seat (G).
5
Hardware Used
M6 x 45 mm Bolt
M6 Washer
x 4
x 4
CC
JJ
6. Place the sling back (H) between the two arms (F),
lining up the holes on the sides. For each hole,
insert an M6 x 45 mm bolt (CC) through an M6
washer (JJ), through back of the arm (F) and into the
sling back (H). Do not tighten completely.
Repeat this procedure on the other side of the
sling back (H).
6
CEE JJ HH
D
G
FF
KK
F
CC
CC JJ
H
F
JJ
Lowes.com/gardentreasures
Front
Back
M6 Nut x 4
HH
M6 Washer x 8
JJ

HANGER ASSEMBLY
F
ASSEMBLY INSTRUCTIONS
7
8. At each end of the seat assembly, bring the holes
in the free ends of the hanging bars
together and thread them onto an "S" hook (Q).
8
9. Hang the "S" hooks (Q) from
the loops on the top frame bar (A).
9
7. Align the hole at one end of a short hanging bar (I)
with the sleeve under the front of the arm (F). From
the outside, insert an M6 x 45 mm bolt (CC) through
an M6 washer (JJ), through the short hanging bar (I),
through a plastic washer (MM), through the sleeve
under the arm (F), through an M6 washer (JJ) and into
an M6 nut (HH). Do not tighten completely. Attach the
long hanging bar (J) to the back of the arm (F) using the
same procedure. Repeat this step for the remaining
Hardware Used
M6 x 45 mm Bolt
Plastic Washer
x 4
x 4
CC
MM
7
I
CC
JJ JJ
HH
MM
J
Q
IJ
A
P
Lowes.com/gardentreasures
long hanging bar (J) and short hanging bar (I).
M6 Nut x 4
HH
M6 Washer x 8
JJ

ASSEMBLY INSTRUCTIONS
8
CANOPY ASSEMBLY
10. Align the holes in the support canopy crossbars(N)
with holes in the canopy side bar (L) on both sides.
For each hole, insert a M5 x 30 mm bolt (AA) through
the canopy side bar (L) and into support canopy
crossbars (N). Repeat this procedure for the other support
canopy crossbars (N). Insert side support crossbars (M)
into the canopy cover (O) bottom edge and align the
holes in the bottom of canopy side bar (L). For each hole,
insert an M5 x 30 mm bolt (AA) through side support
10
11. Insert the knob (P) through the grommet hole in
the canopy (O) into the canopy side bar (L). Stretch
the canopy (O) over the top of the swing and repeat
procedure on the other side of canopy side bar (L).
You can change the tilt of the canopy (O) by adjusting
the knobs (P).
Tighten all connections using Allen wrenches (LL)
11
Hardware Used
N
L
AA
O
M
AA
AA
Hardware Used
M5 x 30 mm Bolt x 12
AA
P
K
O
Lowes.com/gardentreasures
fitting the corners over the ends of side bar (L). Repeat
this procedure for the other canopy side bar (L).
canopy crossbar (M) and into canopy side bar (L). Place
one end of the canopy (O) over the canopy side bar (L),
and open hex wrench (BB).
LL
BB
Allen Wrench
Open Hex Wrench
x 2
x 2

NOITPIRCSEDTRAP
A Top frame bar 0511265A
B Front leg 0511265B
C Back leg 0511265C
D Back crossbar 0511265D
E Leg crossbar 0511265E
F Arm 0511265F
G Sling seat 0511265G
H Sling back 0511265H
I Short hanging bar 0511265I
J Long hanging bar 0511265J
K Magazine bag 0511265K
L Canopy side bar 0511265L
M
Side support canopy crossbar 0511265M
N Support canopy crossbar 0511265N
O Canopy
0511265O
9
CARE AND MAINTENANCECARE
REPLACEMENT PARTS LIST
Wash with mild soap. Rinse with water and let air dry.
ONE-YEAR LIMITED WARRANTY
This warranty is extended to the original purchaser and applies to defects in materials and
workmanship of your patio furniture provided your furniture is maintained with care and used only for
personal, residential purposes.
Frames are warranted to be free from defects in material or workmanship for a period of one (1) year.
Cushions, Straps and/or Wicker Weaves are covered for a period of one (1) year against defects in
material or workmanship. Sling fabric is covered for a period of one (1) year against defects in
material or workmanship.
Exclusions: Items used for commercial, contract or other non-residential purposes; display
models; items purchased "as is;" or items damaged due to acts of nature, vandalism, misuse or
improper assembly are not covered.
If within the stated warranty period a product is found to be defective in material or workmanship, the
purchaser must contact the manufacturer's customer service department at 1-800-643-0067.
The manufacturer, at its option, will repair or replace the defective parts.
Warranty is to the original purchaser and is non-transferable. Any replacement of warranted items will
be in the original style and color or a similar style and color if the original is unavailable or has been
discontinued. As some states do not allow exclusions or limitations on an implied warranty, the above
exclusions and limitations may not apply. This warranty gives you specific rights, and you may also
have other rights which vary from state to state.
For replacement parts, call our customer service department at 1-800-643-0067, 8:00 a.m. - 8:00 p.m.,
EST, Monday - Friday.
Lowes.com/gardentreasures
PART#
O
N
A
H
BE
I
F
G
D
K
J
M
C
L
Foot Cap
“S” Hook
Knob
P
P
Q
Q
R
R
0511265P
0511265Q
0511265R

AA
JJ
KK
LL
MM
BB
CC
DD
EE
FF
GG
HH
II
REPLACEMENT PARTS LIST
10
Printed in China
Lowes.com/gardentreasures
Garden Treasures®is a registered trademark
of LF, LLC. All rights reserved.
PART DESCRIPTION PART#
AA M5 x 30mm Bolt 0511265AA
M6 x 45mm Bolt
CC
M6 x 50mm Bolt
DD
M6 x 75mm Bolt
EE
M8 x 45mm Bolt
FF
M8 x 95mm Bolt
GG
HH
M6 Washer
II
M8 Washer
JJ
M6 Nut
KK
M8 Nut
LL
MM Plastic Washer
Allen Wrench
Open Hex Wrench
0511265CC
0511265DD
0511265EE
0511265FF
0511265GG
0511265HH
0511265II
0511265JJ
0511265KK
0511265LL
0511265MM
BB 0511265BB