Garett Smartwatch Garett Women Nicole Assembly instructions

Smartwatch Garett
Women Nicole
Manual Guide
www.garett.eu

SECURITY ISSUES
Please read the contents of this manual carefully before use and keep it for
future reference. The manufacturer is not responsible for any damage / injury
caused by improper use. Depending on the particular batch of the device,
some functions may differ from those described in the manual.
Do not dive in the device.
In the event of damage, return the device to an authorized service
centre for inspection/repair. If you attempt to repair the device yourself,
you may damage the device and void the warranty.
Protect the device from heat sources and direct sunlight.
Do not immerse the device in hot water.
Use of this device near medical devices may interfere with their
operation. Special attention should be paid when using the lubricant
near medical devices such as pacemakers, hearing aids and other
electronic medical devices.
It is forbidden to throw devices into fire. There is a risk of battery
explosion and consequent danger to life and health.
It is forbidden to use the device if it is damaged.
Clean the device only with a soft, slightly damp cloth. Do not use
chemicals or detergents to clean this device.
IMPORTANT! Smartwatch is not a medical device. The Garett Women Nicole
model and the JYouPro application are not for medical diagnosis, treatment or
as a preventive measure against illness or disease. You should first seek
medical advice before changing your sleeping and physical activity habits.
2

DESCRIPTION OF THE PRODUCT
INSTRUCTION
Put the watch on your wrist and adjust the length of the strap so that it is not
loose.
1.Display
2.OI/off/enter menu/change function touch button
4.Replacement strap
3.Set of sensors
TURN ON
Switching on/off
Press and hold the touch on/off button(2) to turn the device on. When you want
to turn the device off, go to the switch-off options in the menu and hold down
the touch button(2).
Note: Before using for the first time, make sure that the smartwatch is
connected to the application. The device will automatically synchronize the
time and the physical activity data will be saved correctly.
3
11
2
13
4

CHARGING
1.The watch is charged using the charging handle supplied with the device. To
open the holder, release the latch by pressing the button marked with two lines
on the left side of the charging bracket (side without charging cable).
Note: During charging, the device should lie stable on a flat surface and
the magnetic tip should be adjacent to the contacts. The first charge
should take about 1-2 hours.
2.Insert the device into the holder so that its contacts on the rear side are in
contact with those of the charging holder. Then connect the other end of the
cable to the USB port of your computer or USB power supply.
BEFORE FIRST USE
Smartwatch works with your smartphone using the JYouPro app. Before
using it, you must download this app from the Google Play Store or AppStore
and install it on your phone.
You can search for the application by entering the name "JYouPro" in the shop
search engine or by scanning the appropriate QR code presented below.
iOS Android
4

PAIRING
Note: Garett Women Nicole Smartwatch does not require a permanent
connection to the smartphone, but you must pair it with your smartphone
using the app to fully enjoy the functions of the device. Before using the watch
for the first time, user data must be entered in the app.
In standby mode, the device measures and analyzes physical activity and
sleep data. The Garett Women Nicole watch is equipped with an
accelerometer (G-sensor) that monitors your body movements and
processes them based on algorithms that determine details of your sleep and
physical activity.
Note: Every time you connect your watch and application, the data
synchronizes automatically (devices must be paired!).
6.After successful pairing, the hour on the smartphone will update.
portrait icon ) : sex, date of birth, weight, height. It is also possible to
5.When pairing, place the watch close to the phone to which it will be
connected.
Note: Smartwatch Garett Women Nicole works with smartphones that
support Bluetooth 4.0. It is also compatible with Android 5.1, iOS8 (and
higher).
1.Switch on the Bluetooth connectivity of your phone.
2.Make sure that the smartwatch is on.
user (The "I" tab at the bottom of the screen, then click on
3.Open the JYouPro application.
4.Enter the "Device" tab at the bottom of the screen, then select the "Scan
Device" option, and then select the device named "E99".
5

2. Step count: Number of steps performed
4. Calories: Calories burned.
6. Sleep: Last sleep time.
8. Blood pressure : pressure measurement function. To take a
measurement, leave the smartwatch screen on the function and wait several
seconds for the result to appear.
1. Main menu screen. The watch faces can be changed by holding the touch
button(2) longer. The menu is navigated by short touches of the button(2). The
functions are selected with a longer press of the button(2).
3. Distance: Distance travelled.
5. Motion : several sports activities to choose from. To start/end the selected
activity, press the touch button(2) longer. The steps, distance travelled,
calories burned will be included in the activity statistics of the current day.
7. Heart rate : To take a measurement, leave the smartwatch screen on the
function and wait several seconds for the result to appear.
9. Blood oxygen: a function to measure blood oxygenation. To perform the
measurement, leave the smartwatch screen on the function and wait several
seconds for the result to appear.
10 Message: the last notification from the connected phone.
change the devices of measurement, weight (Bookmark I > Devices). After
connecting the watch to the phone, the recording and analysis of physical
activity and sleep starts automatically. When disconnected, the smartphone
display shows time and activity information. The data is also stored in the
smartphone memory.
DISPLAY MENU
6

7
xDisplay device name and software version.
xPhone search function. It sets off an audible alarm on your phone.
xShut down. Shut down.
11. More:
Heart rate, attention:
To start the heart
rate/pressure/saturation
measurement, go to the selected
function and wait for the results to
appear. Before starting the
measurement, make sure that the
sensor touches the skin. The area to
be measured should be kept clean,
dirt may affect the result.
Keep your body relaxed and still
during testing. Keep the device at the
same height as your heart, do not
speak during the test. The
measurement should last at least 1
minute for an optimal result.

JYOUPRO APPLICATION
On the main screen of the
application, there are tabs :
Walk
We will see the activity statistics
for the current day. Clicking in the
lower half of the screen will
display reports from previous
periods.
Data (Home Screen)
The result of the last pressure
measurement is displayed at the
top of the screen. Clicking "Start"
will start the measurement
remotely. By clicking on the lower
half of the screen you will display
the reports from previous periods.
Pulse meter
The top of the screen shows the
result of the last pulse
measurement. Clicking "Start" will
start the measurement remotely.
By clicking on the lower half of
the screen you will display the
reports from previous periods.
Sleep
In this tab you will find information
about the quality of our last sleep.
By clicking on the bottom half of
the screen we will display reports
from previous periods.
Blood pressure
8
Clicking the icon forces
manual synchronization of all
data from the watch.

In this tab we can register the
selected activity and the route we
are moving using the phone's
GPS. Clicking the icon in the
upper right corner will display the
previously recorded activities.
For the function to work, the
application must have permanent
access to GPS.
Activities In this tab we configure the user-
related settings :
1. By clicking on the portrait icon
we can set: gender, birthday,
height, weight.
2. Aim of the steps. Daily aim of
the steps.
3. Devices - selection of devices
of measure.
4. Version- information about the
application version.
Me
9

•Time format : choose 12H or 24H hour format on the device.
•Disconnect the device : disconnect the watch from the app.
Disconnect the device : disconnect the watch from the app.
10
Display : 0.96 inch LCD
Compatible with: Android 5.1, iOS8 (and higher)
Bluetooth: 4.0 (transmission range up to 10 meters)
The battery: 100 mAh
Replacement strap
Warranty : 24 months
Waterproofness : IP67
TECHNICAL SPECIFICATION
Chipset: DA14585
Dedicated application : JYouPro
MORE
More information about this device is available at www.garett.pl. Visit www.garett.eu
for more products and accessories.
In case of problems with using the device, we encourage you to
contact our technical department via e-mail: [email protected].

SETTINGS
Select the "Device" tab at the bottom of the application to go to the settings
menu, where the user can change the smartphone settings, search for
devices, adjust the device settings, update the application/software, obtain
version information.
App notifications : select the apps
from which notifications will be
displayed on your smartphone.
Find the device : the smartphone search
function, it sets off a vibrating alarm.
Automatic pulse measurement: on/off
and configuration of automatic pulse
measurement.
Clock alarm : configuration of the alarm
clock that runs on your watch.
More settings :
Remote camera: function of taking
pictures remotely with the phone's
camera using a smartphone.
Notifications:
Update : update function of the
smartwatch software
on/off call notifications.
SMS notifications: on/off.
Inactivity : On/Off and configuration of
inactivity notifications.
Factory settings : reset the device to the
factory settings.
Power Saving Mode : Set up power
saving functions. By activating the "Mute
mode" option, no new notifications will
be displayed on your watch
11

The product has a 24-month manufacturer's warranty. The warranty does not cover defects and
damages caused by the user's fault or as a result of improper use (incompatible with the intended
use). The warranty also does not cover mechanical damage and damage caused by using
accessories other than those included in the kit. The warranty also does not cover consumables.
When advertising the product, it is necessary to fill in the warranty card attached to the device and
send it together with the proof of purchase to the service address given on the warranty card.
25-520 Kielce
S.C. Paweł Knez, Piotr Wilczyński
Contact details are available on the website:
www.garett.eu
The producer:
Targowa 18/1413
www.garett.eu
(waste electrical and electronic equipment)
Correct disposal of the product
A marking on the product or in the texts referring to it indicates that it should not be disposed of with
other household waste after its useful life has expired. To avoid harmful effects on the
environment and human health from uncontrolled waste disposal, please separate the product
from other types of waste and recycle responsibly in order to promote the reuse of material
resources as a sustainable practice. For information on where and how to recycle this product in
an environmentally sound manner, household users should contact the retailer where they
purchased the product or the local authority. This product should not be disposed of with other
commercial waste.
Manufactured in P.R.C
WARRANTY/ADVERTISEMENTS


www.garett.eu
Table of contents
Other Garett Personal Care Product manuals