Garmin GPSMAP 5208 - Marine GPS Receiver User manual

Garmin GPSMAP
®
56
- Menu-driven touchscreen interface
- High resolution display
- Panel or bracket mount
- World wide satellite imagery
- Preloaded US marine charts including
Alaska, Hawaii and Bahamas
- NMEA2000 support for engine monitoring
- Connect to the Garmin Marine Network to
add sonar, radar and weather
®
Garmin panel mounted
shown with Vantage View gauges
GPSMAP® 5208 and GPSMAP® 5212 easily connects
to the high-speed Garmin Marine Network, so you
can interface with additional MFDs and add remote
sensors. You can also add high-powered radar, sonar,
and XM™ satellite weather and radio to your system.
- Dimensions: 10.1” W x 6.8” H x 4.2” D
- Overall: 10 3/4” W x 7 1/4” H
- Screen size: 8.4” diagonally
- Resolution 640 x 480
GPSMAP®5208
What you get
- GPSMAP® 5208 - Flush mount
- Bail mount - GPS 17x NMEA2000
- Power cable - NMEA0183 cable
- Video cable assembly - Marine grommet kit
- Protective front cover - Owner's manual
- Installation instructions
Display010-00593-01
bezel GPSB5208 + color
Mix and Match with Vantage View gauges
to see Alarms, Faults and Warnings.
See page 55

Garmin GPSMAP
®
57
What you get
- GPSMAP® 5212 - Flush mount
- Bail mount - GPS 17x NMEA2000
- Power cable - NMEA0183 cable
- Video cable assembly - Marine grommet kit
- Protective front cover - Owner's manual
- Installation instructions
Display010-00594-01
bezel GPSB5212 + color
®
GPSMAP®5212
- Dimensions: 12” W x 9.5” H x 4.7” D
- Overall: 13 1/4” W x 9 3/4” H
- Screen size: 12.1 diagonally
- Resolution 1024 x 768
Every function is controlled right from the touchscreen.
Just point, press and go.
GC10TM Marine Camera
- Standard or reverse-image cameras
- Works inside or outside
- Reverse-image cameras reverse the
video on your screen, perfect for backing
out of tight locations
- Infra-red feature for low-light conditions
- Anodized exterior with a powder coated
aluminum housing is corrosion resistant
for long-term use
- 2.7” H x 3.7” W x 2.8” D
standard image 010-11372-00
reverse image 010-11372-01
GSD™ 22 Sounder
- Must be used on 5208/5212 for sonar picture
- Adjusts gain and transmit power automatically
to optimize the returns for shallow water
- Connects to a dual-frequency transducer and works with
everything from a standard 500 watt transom-mount
transducer to a heavy-duty 2 kW thru-hull or in-hull
transducer and can reach a depth of up to 5,000 feet
Part Number 010-00397-00
bracket mount

Garmin transducers
- In-hull plastic housing
- Depth only
- 50/200 kHz
- 600 Watts
- 25 ft cable
- No holes to drill or hull protrusions on solid fiberglass up
to 1" thick & aluminum hulls under .15" thick
- Recommended for planning hull power boats, trailered
boats, rigid inflatable boats (RIBS) and racing sailboats
- Adjustable for deadrise angles up to 22°
In-Hull/Shoot Thru Airmar P79
Part Number 010-10327-00
These transducers have the following features,
in addition to what is listed below:
- Beam width:
50 kHz- 45°
200 kHz- 12°
- Depth Range:
50 kHz- 800 ft to 1200 ft
200 kHz- 400 ft to 700 ft
- Thru-hull plastic housing
- 50/200 kHz
- 600 Watts
- 39 ft cable
- Low profile design has no effect on
your boats running performance
- For use on fiberglass and metal hulls
with 0° to 12° of deadrise
- Requires connection to GSD22 for sonar display
Flush Thru-Hull Airmar P319
depth only 010-10194-00
depth & temperature010-10194-01
- Transom mount plastic housing
- Depth, speed & temperature
- 50/200 kHz
- 600 Watts
- 25 ft cable
- Designed for large outboard and I/O
powered boats up to 35 ft
- Accommodates transom angles of 2° to 20°
Transom Mount Airmar P66
Part Number 010-10192-01
®
58
- Thru-hull bronze housing
- Depth & temperature
- 50/200 kHz
- 600 Watts
- 30 ft cable
- Fixed tilted element compensates for hull
deadrise aiming the beam straight down
resulting in strong echo returns and accurate
depth readings
- For use on fiberglass and wood hulls
- 12° accommodates 8° to 15° hull deadrise
- 20° accommodates 16° to 24° hull deadrise
Flush Thru-Hull
Airmar B60
Tilted Element
20° tilt 010-10982-00
12° tilt 010-10982-01
For Depth only display
(no picture) a NMEA2000
Intelliducer must be used.
Available in transom or thru-hull.
Please call for pricing.

GPS Speedo w/ Odometer pg 67
Harness Capabilities pg 71
Keypad Start pg 72
shown above
Hustler
shown above
Nortech
photo courtesy of
Florida Powerboat Club
Smartcraft® MercMonitor pg 60

Displays
NMEA2000
Compatible
Gauges
NMEA2000
Compatible
Engines
NMEA2000 Compatible
Outboards & Sterndrives
Systems
Trim Tabs
Depth Sounders
GPS
Chart Plotters
Pucks
RPM 1 · 2 · 3
Voltage 1 · 2 · 3
Oil Pressure1 · 2 · 3
Coolant Temperature1 · 2 · 3
Tank Level Fuel 1 · 2 · 3
Trim Position 1 · 2 · 3
Water Pressure1 · 2 · 3
Check Engine Alarm 1 · 2 · 3
Fuel Flow 2 · 3
Engine Hours 2 · 3
Boost Pressure 2 · 3
Oil Temperature 2 · 3
NMEA2000/J1939†
Out/In Supported Data Level
Multiple Tank Levels 2 · 3
Tabs 2 · 3
GPS Speed/COG/
Lat-Lon (in only) 2 · 3
Depth 2 · 3
Sea Water Temp 2 · 3
Paddle speed 2 · 3
Pitot Speed 2 · 3
Rudder Angle 3
Gear Pressure 3
Gear Temp 3
Fuel Pressure3
NMEA2000 Only
Out/In Supported Data Level
Merc Monitor Kits 3 3/8” cutout Part Number
Single Engine- Troll Control- NMEA2000 Data Level 1 879337K51
Single Engine- RPM SmartTow- NMEA2000 Data Level 2 879338K51
Multi Engine- RPM SmartTow- NMEA2000 Data Level 3 879337K52
Multi Engine- GPS SmartTow Pro- NMEA2000 Data Level 3
includes GPS antenna 879339K51
Billet Race Rim MMRR + color
5
5
6
6
5 Available on Mercury Verado
6 Available on Cummins MerCruiser Diesel Engines
† J1939 limits signals and data levels
Smartcraft MercMonitor
®
60
featuring Mercury Gateway
®
MercMonitor converts engine and system data to
NMEA2000/J1939 protocol for use on NMEA2000/J1939
multifunction gauges and diplays

featuring ECO-Screen
The ECO feature is constantly monitoring engine RPM,
boat speed, fuel consumption and engine trim‡ to
automatically calculate and guide you to your best fuel
economy settings.
MercMonitor converts SmartCraft®engine
and system data to NMEA 2000®/J1939
protocol for use on NMEA 2000®/J1939
multifunction gauges and displays such as
Garmin, Lowrance, Ray Marine and others.
Use the MercMonitor in combination with
Vantage View gauges and multi-functions
displays for the most comprehensive collec-
tion of information delivered right to your
helm.
Shown here: Vantage View gauges with
blue Race rims, Garmin GPSMAP®740 with
Livorsi’s billet aluminum powder coated
bezel in blue and the MercMonitor with a
blue rim.
Vantage View gauges pg 44
Garmin displays pg 56
‡ Digital trim sender required for full functionality
Smartcraft MercMonitor
®
61
Not Optimized Optimized