GBC RLS32 User manual

RLM11
RLSM9
RLS32
RLX20
2
0
M1
1
SM
9
Mercury Large Office Series
Instruction Manual

Specifications
RLM11
11 sheets
(11 sheets 207V~50Hz)
Continuous operation
230V / 50Hz
5.0A
RLS32
32 sheets
(28 sht 207V~50Hz)
Continuous operation
230V / 50Hz
8.0A
Models
Sheet Capacity
Duty Cycle
Volts / Hz
Amperage
Models
Sheet Capacity
Duty Cycle
Volts / Hz
Amperage
RLSM9
9 sheets
(9 sheets 207V~50Hz)
Continuous operation
230V / 50Hz
5.0A
RLX20
20 sheets
(20 sheets 207V~50Hz)
Continuous operation
230V / 50Hz
7.0A
IMPORTANT: ONLY INSERT ONE CD OR ONE CREDIT CARD AT A TIME.
QuickStart Guide

Illuminated Panel
Models: RLS32, RLX20 Models: RLM11, RLSM9
1 2 3 4
jad
f
e
g
b
c
h
i
jad
f
e
g
b
c
h
i

Safety First
Shredders are safe to use as long as you take a few safety
precautions.
tEnsure the machine is plugged into an easily accessible
power outlet, and ensure the cable is not likely to trip up a
passer by.
t
invalidate the warranty. Please return to supplier.
tUnplug your shredder before moving it or when it is not in
use for an extended period of time.
tDo not operate with a damaged power supply cord or plug,
after it malfunctions, or after it has been damaged in any
manner.
tDo not overload electrical outlets beyond capacity as this can
tThe socket-outlet should be installed near the equipment and
shall be easily accessible.
t
the appropriate electrical supply.
tDo not use near water.
tDo not use aerosol dusters or cleaners.
tDo not spray anything into the shredder.
Although this shredder has been designed to be child safe, it is
not advised to operate the machine near children and pets.
We only recommend the use of Rexel branded
shredder lubricant to maintain optimum
performance and safety. GBC accepts no liability
for product performance or safety if anything
other than Rexel branded shredder lubricant is
used (Order Code 1760049).
WARNING: Do not use flammable oil.
Only Rexel oil 1760049 is recommended.
Introduction
Thank you for choosing this shredder from GBC . We are sure it will serve you well, but please take a little time to study these
instructions to ensure you get the best out of your machine.
a Indicator Panel
b Door for Bin
c Wheels
d On/Off Button
e Reverse Button
f Auto Button
g Forward Button
h CD Slot
i Anti-jam Indicator
j Oil Reservoir Cap
1 Oiling in Operation
2 Oil Level
3 Door Open
4 Bin Full
Lights and Icons Explained
Decal Panel
1 2 3 4
Anti-Jam Indicator Auto Bin Full Door Open Oil Level Oiling/Auto
Colour of LED Red Green Blue Red Red Red Green
Power On/Off Switch
Auto Mode light light
Forward Mode light light
Reverse Mode light light
Mercury Anti-Jam Technology light light
Bin Full light light light
Door/Bin Open light light light
Self Cleaning of Cutters light light
Sleep Mode
Auto Oiling in Operation light light
Oil Level Indicator light light

Door Open Safety Function
If the door is opened during shredding as a safety precaution
the shredder will instantly stop, and the door open symbol on
simply press the auto button again (f).
Mercury Anti-Jam Technology
Mercury Shredders will only shred stacks of paper that are
within the shredders sheet capacity. For example, a shredder
with a capacity of 22 sheets will not allow the shredding of
more sheets than this.
Sensors in the paper feed area measure the thickness of
paper about to be shredded. The ability to shred or not is
communicated through red and green lighting. Green means
that the stack of paper is within the shredders sheet capacity
and OK to shred. Red means that you have too much paper,
remove some sheets in order to shred.
Given that you are unable to shred more sheets of paper
than the shredder is capable of shredding, paper jams are
prevented.
This prevents time wasted through reversing paper and
unblocking jams not to mention the mess it can create.
Rare Occasions of Jamming
In the unlikely event of the shredder jamming, use the reverse
function to unblock the shredder.
Alternating between the reverse and continuous forward
functions will help unblock the feed area.
Initial Setup
The shredder is designed to automatically lubricate the cutting
mechanism as required to ensure the product continues to
work to its maximum performance and to extend the product
open the oil reservoir cap on the head of the shredder (j) and
pour in the 60ml bottle of oil provided as standard. This is
to operate continuously for approximately 1 hour shredding
Auto button (f) for 5 seconds to start the pump and prime the
using a bottle of standard Rexel oil (1760049). The automatic
oiling operation lasts approximately 2 seconds and you
will hear the distribution pump during this time. Auto-oiling
operates after 15 minutes of shredding.
Shredder Control Panel
ReverseForwardAuto
Safety First
This means you should be careful because long hair can become
entangled in the cutting head.
This means don’t reach into the feed opening of the cutting head.
This means be careful of ties and other loose clothing which could
become entangled in the cutting head.
This means be careful of loose jewelry which could become
entangeld in the cutting head.
This means keep children away from shredder.
This means do not shred CD’s.
This means oil level.
This means oiling in operation.
This means do not shred credit cards.

Operation
1RLS32 & RLX20 only. After unpacking the product, pull
out the shredder bag frame and remove the CD shard
tray,which sits on top of the bag frame. Store this tray on
the bag frame as shown and use when you shred CD’s or
credit cards to separate waste for recycling. On the RLM11
and RLSM9 high security models, the CD tray can be left
permanently in position in the shredder.
2
bottle of oil provided*. Close the cap.
3Connect shredder to mains supply.
4Check that the on/off switch at the back of the machine is
swtiched to the ‘ON’ position.
5Press and hold down the Auto button (f) for 5 seconds to
start the pump and prime the system. Only required when
6To commence shredding, press the auto feed button. This
sets the shredder into auto mode.
7Insert paper to be shredded into the feed area. The
shredder will detect the paper and start automatically.
8If the shredder is left in auto mode for more than 2 minutes
without being used, the shredder will automatically turn
back to standby mode in order to save power.
9The shredder will automatically ‘wake up’ from sleep mode
when paper is inserted into the shredder mouth. There is no
need to press the Auto button (f).
* replacement oil bottle No. 1760049
CD and Credit Card Shredding
1A separate CD tray is provided to collect the shredded
CD shards. On the RLS32 and RLX20, ensure that this is
correctly mounted onto the standard shredder bag frame
before shredding CD’s or credit cards. The RLM11 &
RLSM9 models are supplied with a separate CD bin, which
should be disposed of separately to paper.
2Always shred CD’s and credit cards through the safety
guard slot (h). Only shred 1 credit card or 1 CD at a time.
3Empty the CD tray or CD bin after 8 credit cards or CD’s to
avoid waste spilling over into the paper waste bin.
RLS32 & RLX20 only. Remove the CD tray before
recommencing to shred paper and store on the bag frame
as shown.
RLS32 / RLX20 RLM11 / RLSM9

Guarantee
ACCO Brands warrants its products and their parts
against defects in materials and workmanship under normal
use for a period of 24 months from the original date of
purchase.
During this period we will repair or replace a defective product
or part subject to the following warranty conditions:
The warranty applies only to defects in materials and
workmanship under normal use and does not extend to
damage to the product or parts which result from:-
anyone other than an authorised ACCO Brands Europe
service centre.
accident, neglect, abuse or misuse owing to failure to
comply with the normal operating procedures for a product
of this type.
Nothing in this Warranty shall have the effect of excluding
the liability of ACCO Brands in respect of death and
personal injury caused by the negligence of ACCO Brands.
This Warranty is offered (subject to these terms and
conditions) in addition to, and does not affect your statutory
rights.
Additional Guarantee
ACCO Brands guarantees the cutting blades of the
shredder to be free from defects in material and workmanship
for 20 years from the date of purchase by the original
consumer.
* Please note that the cutter blades will be progressively worn
down by shredding fastened sheets (staples and paperclips)
- this is not covered in the warranty. With regards to CD
shredding, GBC large office shredders have been designed to
shred up to 500 CDs during the warranty period. Excessive CD
shredding will wear the cutters and is not covered within the
warranty.
These conditions shall in all respects be governed and
construed in accordance with English Law and subject to the
exclusive jurisdiction of the English Courts.
Bin Full
When the bin is full the shredder will not function and the bin
full symbol will illuminate red.
When this happens you must empty the bin.
tOpen the door and slide out the waste sack support frame.
Carefully remove the waste sack from the frame.
Once the waste bag has been disposed of and replaced, close
the door and press the auto button to resume shredding.
Note: RLX20, RLM11, RLSM9 Models - Once the waste bag
has been reinserted and/or cabinet door has been closed, the
shredder will run in reverse for three seconds, stop for two
seconds and then forward for three seconds to clear away
any remaining paper from the cutter mechanism. This ‘self-
cleaning’ mechanism is additional jam prevention technology
from GBC.
Service
We recommend these machines are serviced every 6 -12
months by a GBC service engineer - see the back of this
booklet for the contact details of your local service centre.
Charges for service applies.

ACCO Brands Europe
Oxford House
Aylesbury HP21 8SZ
United Kingdom
www.accoeurope.com
Ref: CBT.6535
Issue: 1 (06/09)
ACCO Service Division
Hereward Rise, Halesowen, West Midlands, B62 8AN
Tel: [phone], Fax: [phone]
www.acco.co.uk/service
ACCO France
Service Aprés-Vente
Tel: [phone], Fax: [phone]
[email protected]
ACCO Deutschland
Arnoldstrasse 5, 73614 Schorndorf, Germany
Tel: [phone], Fax: [phone]
ACCO Iberia SL
Isaac Peral 19, 28820 Coslada (Madrid)
Tel: [phone], Fax: [phone]
ACCO Brands Italia Srl
Via Pietro Nenni 13, Settimo Torinese (TO)
Tel: [phone], Fax: [phone]
[email protected]
ACCO Brands Benelux B.V.
Peppelkade 64, 3992AK Houten, Nederland/Les Pays-Bas
Tel: [phone], Fax: [phone]
[email protected], www.accobenelux.be
ACCO Brands Benelux B.V.
Peppelkade 64, 3992AK Houten, Nederland/Les Pays-Bas
Tel: [phone], Fax: [phone]
[email protected], www.accobenelux.be
ACCO Brands Benelux B.V.
Peppelkade 64, 3992AK Houten, Nederland/Les Pays-Bas
Tel: [phone], Fax: [phone]
[email protected], www.accobenelux.nl
ACCO Brands Nordic AB
Makadamgatan 5, 254 64 Helsingborg, Sweden
Tel: [phone], Fax: [phone]
[email protected]
XERTEC a.s.
U Továren, 770/1b, 102 00, Praha 10, Ceska Republika
Tel: [phone], Fax: [phone]
www.xertec.cz
SERWIS ACCO
05-300 Mińsk Mazowiecki, Ul. Grobelnego 4, Polska
Tel: [phone], Fax: [phone]
ACCO Hungária Kft
Budapest, Ócsai út 4., 1239, Hungária
Tel: [phone], Fax: [phone]
Представительство компании
«АККО Дойчланд ГМБХ иКО. КГ»
Россия 105005, Москва, Денисовский пер., д.26
Те л : [phone], Факс: [phone]
«Полиграфические системы»
ул. Набережно-Корчеватская, 78, г. Киев, 03035, Украина
Те л .: ([phone], ([phone]
ACCO Österreich
Sallmann Bürotechnik GmbH, Schumacherstr.13, 5020 Salzburg
Tel: [phone], Fax: [phone]
[email protected]
ACCO Schweiz
ABC Bürotechnik AG, Winkelbüel 4, 6043 Adligenswil
Tel: [phone], Fax: [phone]
[email protected]
ACCO-Rexel Ltd
Clonshaugh Business & Technology Park, Clonshaugh, Dublin 17, Ireland
Tel: [phone], Fax: [phone]
[email protected], www.accorexel.ie
Rexel Office Products (PTY) Ltd
Crusher Road, Crown Ext.3, PO Box 102,
Crown Mines, Johannesburg 2025, South Africa
Tel: [phone]
[email protected]
ACCO Brands Asia Pte Ltd
47 Ayer Rajah Crescent, #05-08/17, Singapore 139947
Tel: [phone], Fax: [phone]
[email protected]
ACCO Brands Japan K.K.
14F Harmony Tower, 1-32-2 Honcho, Nakano-ku, Tokyo 164-8721
Tel: [phone], Fax: [phone]
[email protected], www.accobrands.co.jp
ACCO Australia
Level 2, 8 Lord Street, Botany, NSW 2019
Tel: [phone], Fax: [phone]
www.acco.com.au
Service