GE VG4262 User manual

VCR User’s Guide
VG4262
We bring good things to life.

IMPORTANT INFORMATION
WARNING
To reduce the risk of fire or
shock hazard, do not expose
this product to rain or moisture.
Caution: To reduce the risk of electric shock, match
wide blade of plug to wide slot, fully insert.
Attention: Pour éviter les chocs électriques,
introduire la lame la plus large de la fiche dans la
borne correspondante de la prise et pousser jusqú au
fond.
Refer to the identification/rating label located on the back panel of your
product for its proper operating voltage.
FCC Regulations state that unauthorized changes or modifications to this
equipment may void the user’s authority to operate it.
Cable TV Installer: This reminder is provided to call your attention to
Article 820-40 of the National Electrical Code (Section 54 of the Canadian
Electrical Code, Part 1) which provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall be connected to
the grounding system of the building as close to the point of cable entry
as practical.
To reduce the risk of electric shock, do
not remove cover (or back). No user
serviceable parts inside. Refer servicing
to qualified service personnel.
This symbol indicates
"dangerous voltage" inside
the product that presents a
risk of electric shock or
personal injury.
This symbol indicates
important instructions
accompanying the
product.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Product Registration
Please fill out the product registration card and return it immediately.
Returning this card allows us to contact you if needed.
Keep your sales receipt to obtain warranty parts and service and for
proof of purchase. Attach it here and record the serial and model
numbers in case you need them. The numbers are located on the back
of the product.
Model No. VG4262
Serial No.
Purchase Date:
Dealer/Address/Phone:

TABLE OF CONTENTS
1
7
First Things First..................................................3
Setting up the VCR ..............................................7
Using the Menu to Set Up Features ......................................8
Language ...........................................................................8
VCR Channels List .............................................................8
To Auto Channel Search .............................................9
To Change the SignalType ......................................10
To Add or Remove Channels ....................................10
Time and Date..................................................................10
Set Daylight-SavingTime .........................................10
Set theTime and Date...............................................11
VCR Plus+ Channels ........................................................12
Additional Set-up Features in the Preferences Menu ........14
Remote VCR1/VCR2 Option ............................................14
Auto Play..........................................................................15
Auto TV/VCR ....................................................................15
EnergySaver ....................................................................16
VCR Basics ........................................................17
Remote Buttons.....................................................................18
Playing aTape........................................................................20
Automatic Rewind.................................................................20
Tape Eject ...............................................................................21
Recording...............................................................................21
Check the SafetyTab.................................................21
Recording ..........................................................23
Recording Features ...............................................................24
Express Recording (XPR)................................................24
Timer Recording ..............................................................25
Timer Recording withVCR Plus+ ...................................26
Setting Up the Channel List......................................26
Using VCR Plus+........................................................26
Stopping aTimer Recording...........................................28
Reviewing and Clearing Programs ................................28
Recording Broadcast Stereo TV or SAP
(Second Audio Program) ................................................28
Recording Audio Only.....................................................29
Playing Back Audio Only...........................................29
UsingTwo VCRs for Copying and EditingTapes ..........30

TABLE OF CONTENTS
2
Other Features...................................................35
Picture Search Options .........................................................32
Forward and Reverse Search .........................................32
Slow Motion ....................................................................32
Commercial Scan (SEARCH button) ..............................32
Frame Advance................................................................33
Index Search ....................................................................33
..........................................................................................33
Go-To Search ...................................................................34
Pro-Tect Plus™ Locking Feature...........................................34
Tracking ..................................................................................35
Time Counter .........................................................................35
On-screen Displays ...............................................................36
Audio Set-up Features ..........................................................37
Reception .........................................................................38
Tape Playback ..................................................................38
Connections.......................................................39
Things to Know Before ConnectingYour VCR....................39
Connecting Your VCR............................................................40
Jacks and Cables .............................................................40
RF Jacks and Coaxial Cables (F-type) ............................40
Audio/Video Jacks and Cables (RCA-type)....................40
Choosing a VCR Connection ...............................................41
Advantages of Audio/Video Cable Connections.................41
Don’t Forget about the AutoTV/VCR Feature ...............41
TV with RF Jack Only ............................................................42
TV with Audio/Video Jacks...................................................43
TV with Audio/Video Jacks and Cable Box to
Unscramble Pay Channels Only........................................44
Appendix: Reference .........................................45
Front Panel.............................................................................46
Indicator Panel.......................................................................47
Back Panel..............................................................................48
Specifications ........................................................................52
Cleaning the VCR...................................................................52
Limited Warranty...................................................................53
Index.......................................................................................55

FIRST THINGS FIRST
3
Hi, my name is Liz…
and I wrote this User’s Guide. It’s my job to see that
you have a rewarding user manual experience. You’ll
find that I’ve arranged this manual to clearly explain
all of yourVCR’s features.
Read the First Three Sections
The first three sections of the manual introduce you to
your VCR, and show you how to set the VCR up and
use the on-screen menus. Reading these sections
gives you the basic information you need to use your
VCR.
What’s Left?
The rest of the book highlights playback and recording
information, contains a detailed connections section,
and a reference section that includes troubleshooting
tips, limited warranty, and index.
5
READ ME!
These note boxes give you tips for
your new video cassette recorder.
➣➣
SETTING UP THE VCR
2
FIRST THINGS FIRST
1
➣
RECORDING
3VCR BASICS
4
➣
OTHER FEATURES
6
5
CONNECTIONS
➣

FIRST THINGS FIRST
4
Step 1: Unpack what’s in the box
The following items come packed in the box:
• VCR
• Remote control
• RF coaxial cable
STEP 2: Install batteries in the
remote control
Follow these steps whenever you need to install or change the
batteries in your VCR remote.
1. Remove the cover of the battery compartment.
2. Place the batteries in the remote, matching the + and – ends
of each battery to the diagram inside the compartment.
3. Replace the cover.
STEP 3: Connect your VCR
If you connect your VCR to your home antenna or cable system
and then to yourTV, use the VCR’s ANT. IN and RF OUT jacks for
a good signal as shown.
If you have a TV with AUDIO/VIDEO jacks, use the jacks for a
better connection. Refer to the Connections section, toward the
back of the manual.
VCR
TV
CABLE/
ANTENNA
CABLE, CABLE BOX, OR ANTENNA
3 CH. 4
ANT. IN
RF OUT
VIDEO
AUDIO
IN
OUT
L
R

FIRST THINGS FIRST
5
VCR Viewing Channel
When using the ANT. IN and RF OUT
jacks to connect your VCR, tune your
TV to channel 3 or 4.
When using the AUDIO/VIDEO jacks
to connect your VCR, tune your TV
to theTV’s video input.
STEP 4: Plug in the VCR
Match the wide blade of the plug with the wide slot in the
outlet. Be sure to insert the plug completely.
STEP 5: Tune the TV
Tune theTV to the VCR viewing channel.The VCR viewing
channel is channel 3 or 4 or theTV’s video input.
• If you connect your VCR using the ANTENNA connectors
with RF coaxial cable, set the 3 CH. 4 switch to channel 3 or
channel 4 — the channel you want to use on yourTV.
• If you connect your VCR using the AUDIO/VIDEO jacks with
audio/video cables, select theTV’s video input to see the
signal. See the TV Owner’s Manual .
STEP 6: Turn on the VCR
Press POWER to turn on the VCR.
STEP 7: Access the menus
TheMENU andnumber buttonslet youaccess, selectand change
menu items. For example, to change the AutoPlay setting, you
would do the following:

FIRST THINGS FIRST
6
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Preferences
6 Audio
7 Language
0 Exit
2. Press 5 to display the PREFERENCES menu .
PREFERENCES
1 Remote Control: VCR1
2 Auto Play: ON
3 Auto TV/VCR: ON
4 EnergySaver: 2:00
0 Exit
3. Press 2 to switch Auto Play to ON or OFF.
PREFERENCES
1 Remote Control: VCR1
2 Auto Play: ON
3 Auto TV/VCR: ON
4 EnergySaver: 2:00
0 Exit
See Additional Set-Up Features for detailed information
about the Auto Play feature.
STEP 8: Set up the VCR
Once you understand how to move around through the menus,
go to the next section to set up your VCR.

7
SETTING UP THE VCR
On-Screen Guide and Additional
Set-up Features
Below is a list of set-up features that you may want to
set up before you begin using your VCR for the first
time.
• Select a Language
• Set up VCR Channel List
(Auto Channel Search)
• SetTime and Date
• Set up VCR Plus+ Channels
• Set the Remote VCR1/VCR2 feature
• Set the Auto Play feature
• Set the Auto TV/VCR feature
• Set the EnergySaver feature
➣➣
SETTING UP THE VCR
2
FIRST THINGS FIRST
1
➣
RECORDING
3VCR BASICS
4
➣
OTHER FEATURES
5
6CONNECTIONS
➣

8
SETTING UP THE VCR
Using the Menu to Set Up Features
You can set up features by using the menu system. Each feature
is explained in this section.
Language
Select your preferred language, and the on-screen displays will
appear in that language.
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Preferences
6 Audio
7 Language
0 Exit
2. Press 7 to select the LANGUAGE menu.
LANGUAGE
Select a language.
1 6 English
2 Español
3 Français
Press MENU to continue
3. Select English, Español (Spanish), or Français (French).
VCR Channels List
If you use a cable box for all channels, this step is not
necessary. Your VCR may come with a channel list preset at the
factory. Even though your VCR may come with a list, it’s
possible that you may want to add or eliminate some channels
depending on whether they are active.
On-Screen Menus
Not all the VCR screens are shown in
this manual when explaining the
features.

9
SETTING UP THE VCR
To Auto Channel Search
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Preferences
6 Audio
7 Language
0 Exit
2. Press 4 to display the CHANNELS menu.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
0 Exit
3. Press 1 to display the AUTO CHANNEL SEARCH menu.
AUTO CHANNEL SEARCH
What type of signal
are you using?
1 Cable TV
2 Antenna
3>Detect Automatically
0 Cancel
4. Select one of the three AUTO CHANNEL SEARCH options.
Choices one and two are self-explanatory. If you choose
Detect Automatically, the VCR automatically detects which
signal system you have attached to your VCR.
AUTO CHANNEL SEARCH
Now scanning channel 14
Press any key to cancel
Auto Channel Search
Use the Auto Channel Search feature
to place all available channels in
memory.
If you ever change cable or antenna
signals, you may need to Auto
Channel Search again.
Detect Automatically
A strong cable or antenna signal in
your area may cause Auto Detect to
mis-detect. If this should happen,
select 1 or 2 for the system you have.

10
SETTING UP THE VCR
The VCR begins scanning for the available channels--this takes
about one to two minutes. The lowest channel is tuned once the
search is complete. Now pressing CHAN up or down should only
select the active channels.
To Change the Signal Type
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
3. Press 3 to change the SignalType between CABLE and ANTENNA.
To Add or Remove Channels
You may want to add or remove channels after you Auto Channel
Search, especially if some of the channels have weak signals or you
don’t want to watch them.
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
3. Press 2 to display the ADD/REMOVE CHANNELS screen. Use
CHAN up or down or number buttons to go to the channels you
want to remove or add.
Time and Date
Before you set the time and date, set the Auto DST (Daylight-Saving
Time) feature to ON or OFF for your area.
Set Daylight-Saving Time
1. Press MENU to display the VCR MAIN MENU. Selecting Channels
The CHANNEL up and down buttons
access those channels active in your
VCR channel list.
You can still access channels not in
the channel list by using the number
buttons on the remote.
ADD/REMOVE CHANNELS
Channel 115
is presently REMOVED
Press INFO to add
Press MENU to exit
ADD/REMOVE CHANNELS
Channel 115
is presently ADDED
Press CLEAR to remove
Press MENU to exit
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Preferences
6 Audio
7 Language
0 Exit

11
SETTING UP THE VCR
Time/Date Display
Pressing INFO on the remote displays
the time and date on the screen.
2. Press 3 to display the TIME menu.
3. Press 2 to turn Auto DST: ON or OFF.
• Select ON if you want theVCR’s clock to automatically adjust
for daylight-saving time.
• Select OFF if you do not want the VCR’s clock to adjust for
daylight-saving time.
Set the Time and Date
1. Press MENU to display the VCR MAIN MENU.
2. Press 3 to display the TIME menu.
3. Press 1 to display the SETTIME AND DATE menu.
SET TIME AND DATE
Time --:--
(hh:mm)
Date --/--/--
Press MENU to cancel
4. Enter the data using the number buttons. Press 0 before
single-digit numbers and follow the on-screen directions.
SET TIME AND DATE
Time 12:34 PM
Date 11/18/97 Tuesday
Press CLEAR to correct
Press MENU to set
Spring forward; Fall backward
In the Spring, daylight-saving time
begins on the first Sunday in April.
Because the clock automatically
changes from 2:00 AM to 3:00 AM
(forward one hour), remember to
include the extra hour for timer
recording falling within this time
frame.
In the Autumn, daylight-saving time
ends on the last Sunday in October.
The VCR clock automatically
changes from 2:00 AM to 1:00 AM
(back one hour). Therefore, it can
affect your recording length.
TIME
1 Set Time and Date
2 Auto DST: ON
0 Exit

12
SETTING UP THE VCR
See next page for Canadian List
Two-DigitVCR Plus+ Channel
Numbers for CableTV
(USA List)
35 American Movie Classics
39 Arts &-Entertainment
57 Black Entertainment
54 Bravo
42 Cable News Network
45 Cinemax
98 Cinemax 2
37 The Discovery Channel
53 The Disney Channel
63 EntertainmentTelevision
34 ESPN Sports Network
47 The Family Channel
33 Home Box Office
95 Home Box Office 2
96 Home Box Office 3
51 The Learning Channel
46 Lifetime
58 The Movie Channel
48 MusicTelevision
49 The Nashville Network
38 Nickelodeon
64 NostalgiaTelevision
99 QualityValue Cable
41 Showtime
97 Showtime 2
59 Sports Channel
52 Turner NetworkTelevision
44 USA-Network
62 Video Hits 1
93 Viewer’s Choice 1
94 Viewer’s Choice 2
55 WGN Chicago
43 WTBSAtlanta
60 WWOR-NewYork
VCR Plus+ Channel List
Refer to your local television list for
a complete VCR Plus+ channel list
for your viewing area or contact
your cable company. Using the list
may save you some time.
VCR Plus+Channels
Using VCR Plus+ can make programming timer recordings for
cable or off-air antenna easier, but you have to put in a little time
right now to set up a channel list. A worksheet and abbreviated
codes for typical cable services in the U.S. and Canada are
provided.
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
3. Press 4 to display the VCR Plus+ Channel List screen.
4. Enter the data following the on-screen directions using your
worksheet.
Screen is for an example only.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
0 Exit
VCR+ Channel My Channel
5 46
4 --
3 -> -> -> 23
2 --
1 --
Use CH+/- to select
Press 0-9 to change
Press MENU to save
VCR+ Channel My Channel
5 --
4 --
3 -> -> -> --
2 --
1 --
Use CH+/- to select
Press 0-9 to change
Press MENU to save
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Preferences
6 Audio
7 Language
0 Exit

13
SETTING UP THE VCR
*Check your local or cable listing for the channel number you receive this station on.
**Check your local listing for broadcast or VCR Plus+ channel number assigned.
Broadcast or
Cable-TV Station
Name
VCR Plus+ Channel
Number** Channel Number You Receive the
Station On*
Hbo 33
ESPN 34
VCR Plus+Worksheet
Two-Digit VCR Plus+ Channel
Numbers for Cable TV
(Canadian List)
67 Allarcom PayTelevision/
Superchannel
44 Arts & Entertainment
72 Cable News Network-Headline
News
61 Cable News Network
70 Canadian Home Shopping Network
56 Canal Famille
69 Cathay InternationalTelevision Inc
68 Chinavision Canada Corp
60 Country MusicTelevision
63 Family Channel
62 First Choice
96 First ChoiceTwo
97 First ChoiceThree
99 First Choice Four
90 House of Commons
91 La Chaine Francaise
51 The Learning Channel
65 MeteoMedia/TheWeather Network
48 MuchMusic Network
55 MusiquePlus
52 Nashville Network
73 Newsworld/CBC
53 Le Reseau des Sports
43 The Sports Network
64 Super Ecran
37 Super Ecran B
98 Super Ecran C
66 Telatino Network
46 TV5 Montreal
92 Viewer’s Choice 1
93 Viewer’s Choice 2
94 Viewer’s Choice 3
95 Viewer’s Choice 4
71 VisionTV:Canada’s Faith Network
38 YouthTV,Canada Inc.

14
SETTING UP THE VCR
Additional Set-up Features in the
Preferences Menu
The features in this section are all accessed through the
PREFERENCES menu.
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Preferences
6 Audio
7 Language
0 Exit
2. Press 5 to display the PREFERENCES menu.
PREFERENCES
1 Remote Control: VCR1
2 Auto Play: ON
3 Auto TV/VCR: ON
4 EnergySaver: 2:00
0 Exit
Now you are ready to select an item from the menu to set up.
Remote VCR1/VCR2 Option
If you own a compatible RCA, GE, or ProScan remote that has a
VCR2, VCR2•LD, or VCR2•DVD button, this feature allows you to set
this VCR to respond to that button.
Press 1 to select the Remote Control item. Then press the VCR2,
VCR2•LD, or VCR2•DVD button to change.
PREFERENCES
(Press VCR2 to Change)
2 Auto Play: OFF
3 Auto TV/VCR: OFF
4 EnergySaver: 2:00
0 Exit
PREFERENCES
1 Remote Control: VCR2
2 Auto Play: OFF
3 Auto TV/VCR: OFF
4 EnergySaver: 2:00
0 Exit
Remote Control Option
Changing the remote option to VCR2
disables the remote that came with
your VCR.

15
SETTING UP THE VCR
The VCR will only respond to the compatible remote’s VCR2,
VCR2•LD, or VCR2•DVD button. If you change the remote setting
to VCR2, the remote that came with your VCR will no longer
control it.
Use the compatible remote to change the remote setting back to
VCR1. Display the PREFERENCES menu, press 1, and then press
VCR on theVCR’s remote.
Auto Play
This feature allows the VCR to automatically start playing when
you insert a tape with the safety tab removed. Press 2 to switch
between ON or OFF.
• Select ON if you want a tape with its safety tab removed to
start playing automatically when the tape is inserted.
• Select OFF if you do not want a tape with its safety tab
removed to start playing automatically.
Auto TV/VCR
This feature controls whether the TV/VCR switch changes
automatically to the VCR mode. Press 3 to switch between ON
and OFF.
• Select ON if you want the VCR to switch to the VCR mode
when the VCR is turned on or a cassette is inserted. This
only applies if you connect the ANT. IN and RF OUT jacks of
your VCR and TV and watch your VCR on channel 3 or 4 of
your TV.
• Select OFF if you want the VCR to remain in the TV mode.
This is useful if you watch your VCR on theTV’s video input
and you don’t want your antenna/cable signal interrupted by
the VCR. Refer to the Connections section, toward the back
of the manual.
Auto TV/VCR
Pressing TV•VCR will still switch
between the VCR and TV mode.
VCR mode: VCR indicator in the
display panel lights.
TV mode: VCR indicator turns off.

16
SETTING UP THE VCR
EnergySaver
By default, this VCR automatically turns off after two hours of
inactivity. Press 4 to change the time delay, or to disable the
feature.
• OFF: The VCR will remain turned on until you shut it off.
• 1:00, 2:00, or 3:00: The VCR turns off after one, two, or three
hours of inactivity.
Thirty seconds before shutting off, the VCR will warn you with a
screen reading, “The VCR will turn off in 30 seconds. Press any
key to cancel.”
If you use the VCR’s tuner instead of your TV to tune channels,
you may want to turn this feature off.

17
VCR BASICS
Learn the Basics To Get You
Started
These VCR basics should be enough for you to begin
enjoying your VCR. Learning the remote control
functions, playing a recorded tape, and recording a
program should do just that.
However, there are other features that enhance the
enjoyment of yourVCR, but they aren’t necessary to
get you started. If you want to learn more about your
VCR, just keep reading.
VCR Basics tells you what you need to
know in order to watch a movie or
tape your favorite show.
5
➣➣
SETTING UP THE VCR
2
FIRST THINGS FIRST
1
➣
RECORDING
3VCR BASICS
4
6CONNECTIONS
➣
5
➣
5OTHER FEATURES

18
VCR BASICS
Remote Buttons
CHANNEL
33
33
3 or
44
44
4 Selects next higher or lower channel
in the VCR’s channel memory.
CLEAR Resets time counter to 0:00:00. Allows you to
change entries when setting the clock or a timer recording.
F.ADV Lets you view one frame with each press of the
button when tape is in pause.
FWD Fast forwards the tape when the VCR is stopped.
Searches forward through a tape during playback. Starts
slow motion during play-pause and increases slow-motion
speed.
GO BACK Switches between two channels. Select one
channel and then select another using the number buttons.
Press GO BACK to switch between the two channels.
INFO Shows the status displays on the TV screen.
INPUT Selects between the line input and theVCR’s tuner.
Line input refers to the signal coming from the component
connected to the AUDIO/VIDEO IN jacks on the VCR.
MENU Brings up VCR MAIN MENU on the TV screen.
Numbers (0 through 9) Select a channel up to 99 by
pressing two numbers. Select a cable channel over 99 by
pressing and holding 1 until 1 – – appears on the screen.
Then press the other two numbers.
SEARCH
POWER
REV
PLAY
FWD
REC STOP PAUSE
INPUT
GO BACK
TRACK
F.ADV
CLEAR MENU CHANNEL
INFO SPEED
SLOW
TV•VCR
231
564
897
0
-
+