GE MONOGRAM ZV1050SF Service manual

Specification Created 1/03
ZV1050SF – GE Monogram 42" High Performance Island Hood
Dimensions and Specifications (in inches)
Product Dimensions
This vent hood is designed to be used in vented ceiling
mounted installations.
*20" to an 8 ft. ceiling
Using supplied duct cover
*32" for 9 ft. ceiling.
Using ZX1059SFSS Accessory
*44" for 10 ft. ceiling
Using ZX10510SFSS Accessory
This vent hood is supplied with a decorative duct cover to
reach 8 ft. ceiling height, or between 7'11" and 8'1".
Duct Cover Accessories
Order Accessory duct covers for 9 ft. and 10 ft. ceilings.
ZX1059SFSS – For 9 ft. ceiling height
This kit includes a decorative duct cover and support frame to
reach a 9 ft. ceiling height.
ZX10510SFSS –For 10 ft. ceiling height
This kit includes a decorative duct cover and support frame to
reach a 10 ft. ceiling height.
Order the accessory at the same time as the vent hood and
have on site before installation begins.
Product Clearances
This vent hood must be installed 25-1/2" min. and 30" max.
above the cooking surface. 30" is recommended for 8 ft.
ceilings. 30" clearance will insure that the duct cover meets
the ceiling. The cooking surface should be at least 36" above
the floor. Installation will be easier if the vent hood is installed
before the cooktop and countertop is installed.
*9 ft. to 10 ft. ceilings may be 25-1/2" to 30" clearance.
*The distance between the cooking surface and the bottom of
the hood must be at least 25-1/2". The 30" recommended
installation height, above the standard 36" countertop, will
insure duct cover fit to the ceiling. For 9 ft. and 10 ft. ceilings,
the hood may be lowered to 25-1/2" over the cooking surface.
IMPORTANT: Clearances may vary due to type of cooking
product and local codes. Check with local inspectors to be
sure standard is applicable.
–When installing the Island Hood above a Monogram
Professional Range or Cooktop, installation clearance must be
at least 30".
10"
*Height
to Ceiling
42"
31-1/2"
*30"
Recommended
36" Min.
For answers to your Monogram,
® GE Profile™or
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center®service, 800.626.2000.
R
Listed by
Underwriters
Laboratories

Specification Created 1/03
ZV1050SF –GE Monogram 42" High Performance Island Hood
Features and Benefits
•Electronic Touch Controls
•1080 CFM Vertical Exhaust
•Dual Blowers
•4-Speed Fan
•3 Removable Filters
•4 Halogen Lamps with 6 Levels of Intensity
•Brushed Stainless Steel Utensil Rod
•8" Round Required Duct Size
•Model ZV1050SFSS –Stainless steel