Listed by
Underwriters
Laboratories
For answers to your Monogram, GE Café™Series, GE Profile™Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center®Service, 800.626.2000. Specification Revised 11/17
UVW8361SLSS
Universal 36" Wall-Mount Glass Canopy Chimney Hood
INSTALLATION INFORMATION :
Before installing, consult Use & Care/installation instructions
packed with product for current dimensional data.
OPTIONAL ACCESSORIES
UX10DC83SS - 10(ft.) Ceiling Duct Cover Kit
Max ceiling height installation with kit - 10'-0" (36” hood spacing)
UXRC1 - Remote Control (Wireless)
UXCF91 - Charcoal Filter
(needed if used in recirculation mode)
AMP RATING
120V TBD
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
20"
36" models require a 36"-wide opening
*The supplied duct cover fits 7'-7" to 9'-6" ceiling heights
(10' ceiling height with optional high ceiling kit UX10DC83SS)
The vent hood must be installed 24" min. above the cooking surface. For optimal performance, installing the
hood more than 36" above the cooking surface is not recommended. The hood installation height above the
cooking surface depends upon ceiling height. The telescopic duct cover conceals the ductwork running from
the top of the hood to the ceiling.
NOTE: Installation height should be measured from the cooking surface to the lowest part
of the hood. This hood may be installed onto a wall and vented to the outdoors, or it can be installed
for recirculating operation. Parts for recirculating operation are supplied with the hood.
24" Min
12-1/4"
13-13/16"
35-7/8"
27-1/2"
to 39-1/2"
2-3/4"
36" Max
20"
36" models require a 36"-wide opening
*The supplied duct cover fits 7'-7" to 9'-6" ceiling heights
(10' ceiling height with optional high ceiling kit UX10DC83SS)
The vent hood must be installed 24" min. above the cooking surface. For optimal performance, installing the
hood more than 36" above the cooking surface is not recommended. The hood installation height above the
cooking surface depends upon ceiling height. The telescopic duct cover conceals the ductwork running from
the top of the hood to the ceiling.
NOTE: Installation height should be measured from the cooking surface to the lowest part
of the hood. This hood may be installed onto a wall and vented to the outdoors, or it can be installed
for recirculating operation. Parts for recirculating operation are supplied with the hood.
24" Min
12-1/4"
13-13/16"
35-7/8"
27-1/2"
to 39-1/2"
2-3/4"
36" Max
20"
36" models require a 36"-wide opening
*The supplied duct cover fits 7'-7" to 9'-6" ceiling heights
(10' ceiling height with optional high ceiling kit UX10DC83SS)
The vent hood must be installed 24" min. above the cooking surface. For optimal performance, installing the
hood more than 36" above the cooking surface is not recommended. The hood installation height above the
cooking surface depends upon ceiling height. The telescopic duct cover conceals the ductwork running from
the top of the hood to the ceiling.
NOTE: Installation height should be measured from the cooking surface to the lowest part
of the hood. This hood may be installed onto a wall and vented to the outdoors, or it can be installed
for recirculating operation. Parts for recirculating operation are supplied with the hood.
24" Min
12-1/4"
13-13/16"
35-7/8"
27-1/2"
to 39-1/2"
2-3/4"
