Geemarc CL555 User manual

This product may be purchased from Connevans Limited
secure online store at www.DeafEquipment.co.uk
DeafEquipment.co.uk
Offering you choice
Helping you choose
Connevans.info
Solutions to improve the quality of life

Amplified Big Button
Telephone And
Answering Machine
CL555
English

1

2
CONTENTS 2
INTRODUCTION 5
Unpacking the Telephone 6
DESCRIPTION and General Description 7
Key Description 9
LCD Description 11
Menu Navigation 13
INSTALLATION and Setting Up 14
Wall Mounting 15
SETTINGS 16
Set Language 16
Set Contrast 16
Night Light Function 17
Set Font Size 17
Hour Format Setting 18
Date Format Setting 18
Ringer Setting 19
Incoming Call Notification Setting 20
Keypad Tones Setting 20
Call Waiting 21
Flash Time Setting 22
Dialling Mode Setting 23
Setting Date and Time 24
Dialling Talking Setting 25
Caller ID Talking Setting 26
Review the Phonebook and Caller ID List 27
Voice Prompt 28
Receiving Volume and Tone Settings 29
USING THE TELEPHONE and Making a Call 30
Last Number Redial 31
Dialling a Number from the Redial List 32
CONTENTS

3
Clear the Redial List 32
Mute Function 33
Hold Function 33
Receiving a Call 34
Hearing Aid Use 34
Flash Signal 34
OPTIONAL ACCESSORIES 35
Shaker 35
Headset and Audio Neck Loop Use 35
CALLER ID 36
View Caller ID List 36
Dial a Number from the Caller ID List 37
Add a Number from the Caller ID List to the Phone book 37
Delete a Number fron the Caller ID List 38
Delete all Numbers fron the Caller ID List 38
Caller ID on Call Waiting 39
PHONE BOOK 40
Create a Phone Book Entry in Standby Mode 40
View Phone Book Entries 42
Dial a Phone Book Entry 42
Modify a Phone Book Entry 42
Delete a Phone Book Entry 43
Voice Announce a Phonebook Entry 44
Record Voice Announce for a Phonebook Entry 44
Delete Voice Announce for a Phonebook Entry 45
QUICK DIAL 46
Create a Quick Dial Number 46
View/Dial a Quick Dial Number 47
Clear a Quick Dial Number 47
ANSWERING MACHINE 48
Switching the Answering Machine On/Off 48
CONTENTS

4
The Outgoing Message 49
Recording an Outgoing Message 49
Checking an Outgoing Message 50
Restore the Outgoing Message 51
Answering Machine Settings 52
Listening to Messages 53
Call Screening 54
Incoming Message Voice Slow 54
Operating the Answering Machine Remotely 54
Remote Code 55
Remote Control 55
Remote Control Commands 56
Recording a Memo 56
Out of Memory 56
TROUBLESHOOTIING 57
SAFETY INFORMATION 58
GUARANTEE 59
RECYCLING DIRECTIVES 61
CONTENTS

5
Congratulations on purchasing your Geemarc CL555. This is a
multifunction telephone which offers features such as hands free
use, caller ID*, caller announce, dialling talking, a phone book,
quick dial and an answering machine. It offers amplification,
helpful for those with hearing difficulties. It has a large button,
easy to see and use keypad, to help stop any misdialling. This
telephone is compatible with hearing aids.
It is important that you read the instructions below in order to use
your Geemarc telephone to its full potential. Keep this user guide
in a safe place for future reference.
This guide explains how to use the following telephone:
CL555
*To use the caller display facility, you must subscribe to your network provider’s caller display
service.
24
INTRODUCTION

6
Unpacking the Telephone
When unpacking the telephone, you should find the following in
the box:
1 CL555 unit
1 CL555 handset with curly cord
1 Telephone line cord
1 Mains power adaptor
1 User Guide
For product support and help visit our website at
www.geemarc.com
Telephone [phone]
Or fax [phone]
INTRODUCTION

7
General Description
1. Handset Knob
13. MEMO
2. Hook Switch
14. Speed Dial Key (M1-M6)
3. Large LCD Screen
15. Additional Amplifier
key/indicator
4. Left Soft Key
16. Speaker Key
5. Up/Down Scroll
17. Message waiting/new call
LED
6. Right Soft Key
18. Headset Key
7. Tone reception Adjustment
19. Microphone
8. Volume reception
Adjustment
20. Store Key
9. Play/Stop
21. R Key
10. Next
22. Redial Key
11. Previous
23. Emergency Speed Dial
(P1-P3)
12. DEL (C)
DESCRIPTION

8
1. Headset jack
2. Audio neckloop jack
3. Optional Bed Shaker jack
4.Volume Reset Override Switch (ON/OFF)
5. Power jack
6. Phone Line Cord jack
7. Back Light Switch
8. New Call Indicator Switch
9.Shaker/Strobe/Strobe and Shaker Select Mode
10. Volume controls
6
DESCRIPTION

9
Key Description
Make/Answer/End a call.
Activates the speakerphone if
pressed during a call
Last number redial
Insert a pause when pre-
dialing a number
Scroll through the menu
options.
Enter the Caller ID list
Soft keys. They perform the
functions indicated by the text
immediately over it (on the
bottom line of the display)
which changes depending on
context
Press this button to turn the
extra amplification ON or OFF
The nine keys are used as
one-touch speed dial keys
This key is used to store
numbers
This button is used to
disconnect a call and re-
establish dial tone or to switch
over to another caller
provided you have requested
these services i.e. call waiting
from your service provider
Press to start or stop the
Message or Memo playing.
DESCRIPTION

10
Press to play the next
message
Press once to play the current
message. Press twice to
play the previous message
When playing a message
press this key to delete the
current message.
Press and hold this key to
record a memo
Use them to adjust the
volume of ringer, dialing
talking, Caller ID
announcing and
speakerphone
DESCRIPTION

11
LCD Description
In standby mode, the large LCD display will show as below
If you forget to connect the phone line cord, No line will show
on the screen
When you press the Menu soft key, the main menu will be
displayed. Use ▲ or ▼ to scroll through the menu until you find
the desired option. Press the Select soft key to confirm.
On receiving an incoming call, the caller’s phone number and/or
name will be displayed (providing you have subscribed to the
Caller ID service with your network provider).
8
DESCRIPTION

12
The screen below shows the total calls and new calls needing
reviewing. In this example you have 16 calls in total, which
includes 12 new calls.
The screen below shows that you have 2 new answer machine
messages.
If you subscribe to a Caller ID service -If the caller has exercised
the option to prevent their name and number from being sent,
Private will be shown on the display.
If you subscribe to a Caller ID service –Out of Area will
display when someone calls from an area where the telephone
company is not offering the caller identification services or is not
yet providing number delivery to your area.
DESCRIPTION

13
Menu Navigation
To access any menu function you must take the following steps:
1) Press the Menu soft key, the main menu will be displayed.
2) Use ▲ or ▼ to scroll through the menu until you find the
desired option.
3) Press the Select oft key to confirm.
To exit any menu you must take the following step:
1) Press the back or the exit soft key, the phone will return to
the previous screen.
Menu Map
Set Display
Set Language
Set Contrast
Dim:X---x
Hour Format
Date Format
Set Phone
Set Ring
Call Waiting
Set Flash
Dialling Mode
Date and Time
Set Talk
Dialling Talking
CID Talking
Review Talking
Voice Prompt
TAM Setup
TAM ON/OFF
Outgoing Msg
Ring Number
Security ID
ICM Voice Slow
DESCRIPTION
DESCRIPTION

14
Setting Up
Connect one end of the curly cord to the handset. The other end
of the curly cord plugs into the jack on the left hand side of the
CL555 unit. Place the handset on the cradle.
Connect the line cord to the socket located at rear of telephone
then connect the plug into the wall socket **.
For the LCD display, backlight and other special features you
must insert the power adapter. Connect the power adaptor to the
jack located at the rear of the telephone then plug the other end
into a 13amp wall socket (*). Please choose a socket near your
telephone to enable you to unplug the mains power quickly in
case of a problem.
(*) Classified “hazardous voltage” according to EN60950 standard
(**) Classified TNV-3 according to EN60950 standard.
INSTALLATION

15
Wall Mounting
Turn the handset hanger clockwise and reverse its position (rotate
it 180 degrees - see diagram 1). This will keep the handset from
falling out of the cradle when it is mounted on the wall.
Knock two self-tapping screws (not supplied) into a wall at a
distance of 80 mm from each other and placed in a vertical line.
Place the phone onto the screw-heads and slide down to secure
(see diagram 2).
12
Diagram 2
INSTALLATION
Diagram 1

16
Set Language
Press ‘MENU’ soft key
Press ‘SELECT’ soft key to access ‘SET
DISPLAY’
Press ‘SELECT’ soft key to access ‘LANGUAGE’
Use and to select one of the 6 languages available
(English, Francais, Espanol, Deutsch, Italian, Dutch)
Press ‘SELECT’ soft key to confirm
Set Contrast
Your screen has a backlight which automatically switches off after
15 seconds of inactivity. The contrast of the backlight against the
text can be increased or decreased.
Press ‘MENU’ soft key
Press ‘SELECT’ soft key to access ‘SET
DISPLAY’
Use and to select ‘SET CONTRAST’
Press ‘SELECT’ soft key
Use and to select one of the 8 contrast levels
available
Press ‘SELECT’ soft key to confirm
SETTINGS

17
Night Light Function
If you wish to use the LCD back light as a night light, switch the
back light switch to . In doing so the back light will
be switched on constantly.
Set Font size
The text can be displayed on the LCD screen in either a large font
or a small font.
Press ‘MENU’ soft key
Press‘SELECT’soft key to access‘SET DISPLAY’
Use and to select ‘DIM:X-x’
Press ‘SELECT’ soft key
Use and to select either ‘ON’ (large)or ‘OFF’
(small)
Press ‘SELECT’ soft key to confirm
Note: If large font is ‘ON’, when you pre-dial a number –if the
telephone number exceeds 8 digits, the font will be switched to
the smaller size automatically.
SETTINGS

18
Hour Format Setting
Press ‘MENU’ soft key
Press ‘SELECT’ soft key to access ‘SET
DISPLAY’
Use and to select ‘HOUR FORMAT’
Press ‘SELECT’ soft key
Use and to select either ‘12 HOUR CLOCK’or
‘24 HOUR CLOCK’
Press ‘SELECT’ soft key to confirm
Note: If 12 hour clock is selected, AM or PM will be displayed on
the right hand side of the time in standby mode.
Date Format Setting
Press ‘MENU’ soft key
Press ‘SELECT’ soft key to access ‘SET DISPLAY’
Use and to select ‘DATE FORMAT’
Press ‘SELECT’ soft key
Use and to select either ‘MM/DD’or ‘DD/MM’
Press ‘SELECT’ soft key to confirm
14
SETTINGS