Geemarc AmpliPHOTO50 User manual

AmpliPHOTO50TM
EASY-DIAL PHONE WITH VOLUME CONTROL
TELEPHONE MULTIFONCTIONS A GRANDES TOUCHES
TELEFONO MULTIFUNCTIONES CON TECLA GRANDES
English
Français
Español

Warning :This telephone product is specifically designed for people
withhearingdifficultiesandisprovidedwithahandsetearpiecevolume
controlforindividualrequirements.Duecaremustbetakenbyallusers
that the handset earpiece volume control is set to the lowest level
acceptablebyeachrespective user. Careshouldtherefore beexercised
to ensure that any new users are familiar with this requirement.
Attention : Ce téléphone peut être destiné aux personnes ayant des
problèmes d'audition. Il possède un écouteur à volume variable. A la
premièreutilisation, assurez-vous que le bouton deréglage duvolume
soit positionné sur la position volume minimum. Les personnes
malentendantes pourront par la suite augmenter le volume pour
l'adapter a leur audition.
Precaucion : Este producto telefónico ha sido especificamente
diseñadoparapersonascondificultadesdeaudición,y lleva un control
de volumen a la altura del auricular para adaptarlo a las necesidades
indiduales. Habrá que tener un cuidado especial de ajustar el control
de volumen al nivel mínimo aceptable porc ada usuario respectivo.
Deberá asegurarse de que todos los nuevos usuarios se familiarizan
con este requisoto.

Index
Description 4
Installation
- Connections 5
- Wall mounting 5
Setting up
- Ringer settings 6
Using the phone
- Answering incoming call 7
- Making a call 7
- Last number redial 7
- Flash key 8
- Receiver volume controle 8
Memory feature
- Storing telephone numbers 9
- Dialling stored number 10
Inserting pictures 11
Regulatory Compliance 12
Guarantee 14

4
Description
1. Receiver
2. Transmitter
3. Hook Switch
4. Memory Index Card
5. M1 Button
6. «Normal» / «One touch» switch
7. Ringer (Off/Lo/Hi) Switch
8. Ringer Indicator
9. 911 Button
10.Store Button
11. Key Button (1~9;*;0;#)
12. Redial Button
13. Photocall Button
14. Receiving Volume Control Handset
15. Flash Button

5
Installation
Handset Cord Connection
Insert the coil cord into modular jack located on the left side of the
base. Connect the other end into the modular jack located on the
handset.
Line Cord Connection
Insert the modular plug of the straight cord into the rear side of base
unit, then insert the other end of RJ11C into the telephone wall
socket (*).
(*) Classified TNV-3 according to EN60950 standard.
Wall mounting
Your phone is also designed to be mounted on a wall.
Make 2 holes in the wall , insert the wall plugs and the wall mounting
screws.
The screws should protrude from wall by 6-7 mm.
Place the phone onto the screw-heads and slide down to secure.
Wall mounting

6
Settingup
Ringer setting
Ringer OFF / LO / HI
Your phone provides a ringer adjustment of High, Low or Off. The
switch is located at the rear side of the telephone.
When you don‘t want to be disturbed, slide the switch to the OFF posi-
tion. Only the red lamp will flash.
Otherwise adjust to HI or LO position.

7
UsingthePhone
Answering incoming call
- When an incoming call is received the phone will ring . To answer
the call lift the handset and speak.
- On completion of the call, carefully replace the handset in the
cradle to release the line.
Making a call
- Lift the handset.
-Await the dial tone and dial required number.
- On completion of the call, carefully replace the handset in the
cradle.
Last Number Redial
Your telephone remembers the last number dialed. If the number you
dial is busy or not being answered, hang up.
To redial the last number automatically, lift the handset then press the
REDIAL button.
NOTE: You can redial the same telephone number as many times as
required.However, once you dial another number,thepreviousnumber
is erased.

8
Usingthephone
Flash
TheFLASH buttoncan be used to retrieve anew dialtone afterending
a call.
The FLASH button is also a useful feature for special telephone servi-
ces such as call waiting and three party calling.
Press briefly, release and perform the custom call procedure.
NOTE : Call waiting is a service of your local telephone company.
Receiver Volume Control
On the front edge of your telephone you will find a slide volume
control. This control may be used to adjust the volume of received
speech.
With the control set towards the right hand side of the phone, the
received volume will be at its maximum.
With the control set to the left side, it will be at its minimum.

9
MemoryFeature
STORING TELEPHONE NUMBERS
M1 and 911 keys
Your phone can store 2 direct memories (one touch) through M1 &
911 keys (like for emergency numbers ).
Others memories
10 memories can be used for programming your most frequently
dialed telephone numbers. You can store up to 16 digits in the
priority key button or in each of the numeric key button (0 through 9),
by following the steps outlined below:
1. Slide the «normal» / «one touch» switch to NORM position.
2. Lift the handset (releasing hook switch).
3. Press STORE button.
4. Dial the number.
5. Press STORE button.
6.Press the priority key M1 or (0-9) (pictures) you want that
telephone number stored in.
7. Your number is now stored.
8. To change a stored number, repeat the same process. The new
number will store over the old stored number.
NOTE : A Memory Index Card is provided for your use in writing
down the persons name.

10
MemoryFeature
DIALING STORED NUMBER
Numbers stored in “one touch” memory keys
- Lift the handset and await the dial tone.
- Press appropriate button M1 or 911.
The stored number will be dialed automatically.
Numbers stored in key button memories
- Lift the handset and await the dial tone.
- Press PHOTOCALL button.
- Press appropriate button 0 to 9.
The stored number will be dialed automatically.
These stored numbers can also be dialed in “one touch” mode
when the keys are equipped with pictures (photos):
- Move the «normal» / «one touch» switch to ONE TOUCH.
- Lift the handset and await the dial tone.
- Press one of the picture buttons.
- The stored number will be dialed automatically.
IMPORTANT : IN ALL THE CASES THE MEMORIES M1 AND 911
WILL BE AVAILABLE IN “ONE TOUCH” MODE.

11
InsertingPictures
To insert photos in the keys buttons proceed as below :
1. Remove numbered plastic cover from each key 0-9.
2. You will need a pictures approximately 1” x 1” inch.
3. Place picture into key.
4. Replace plastic cover.
Extra Set of Plastic Picture Covers
You will find an extra set of clear plastic picture covers this is to be
used if you want to use the photo memories only.
1. Remove numbered plastic cover from each key 0-9 and put them
aside.
2. You will need a picture approximately 1” x 1¼” inch.
3. Place picture into key.
4. Replace with new all clear plastic covers.

12
RegulatoryCompliance
Part68 of FCC rules information
-This equipment complies withPart 68 of theFCC rules andthe requirements
adopted by the ACTA. On the bottom of this equipment is a label that
contains,among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the
telephonecompany.
-All applicable certification jacks Universal Service Order Codes (USOC) for
theequipmentisprovided(i.e.RJ11C)inthepackagewitheachpieceofapproved
terminalequipment.
-A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC Part 68 rules and
requirement adopted by theACTA.A compliant telephone cord and modular
plugisprovidedwith this product. Itisdesignedtobeconnectedtoacompatible
modular jack that is also compliant. See installation instructions for details.
-TheRingerEquivalenceNumber(REN)isanindicationofthemaximumnumber
ofterminalsallowed to be connectedto a telephone interface.The termination
on an interface may consist of any combination of devices subject only to the
requirementthatthesumoftheRingerEquivalenceNumbersofallthedevices
does not exceed five (5). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local
telephonecompany.
For products approved after July 23, 2001, the REN for this product is part of
the product identifier that has the format US:AAAEQ##TXXXX. The digits
represented by ## are the REN without a decimal point (e.g., 03 is a REN of
0.3).
For earlier products, the REN is separately shown on the label.
- If this equipment causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of service
maybe required. But if advance notice isn’tpractical, the telephone company
will notify the customer as soon as possible.Also, you will be advised of your
rights to file acomplaint with the FCC if you believe it is necessary.
- The telephone company may make changes in its facilities, equipment,
operationorproceduresthatcould affect the operation of theequipment.Ifthis
happensthetelephonecompanywillprovideadvance notice in order for you to
makenecessary modifications to maintain uninterrupted service.
- If trouble is experienced with this equipment, for repair or warranty
information,please contact ourcustomer service staffat: 248-577-5400
If the equipment is causing harm to the telephone network, the telephone

13
Index
RegulatoryCompliance
company may request that you disconnect the equipment until the problem
isresolved.
- Please follow instructions for repairing if any; otherwise do not alter or
repair any part of device except as specified.
Opening the equipment or any attempt to perform repairs will void
the warranty.
For service or repairs, call 248-577-5400
- Connection to party line service is subject to state tariffs. Contact the state
public
utility commission, public service commission or corporation for information.
If your home has specially wired alarm equipment connected to the
telephoneline,
ensure the installation of this telephone equipment does not disable your
alarm
equipment.If you have questions about what willdisable alarm equipment,
consult
yourtelephone company or a qualified installer.
- This equipment is hearing aid compatible.
- This product meets the applicable Industry Canada technical
specifications.

14
SonicAlert warrants the phone against any defect in materials or
workmanshipfor the period of one year fromthe date of purchase.
Shouldyou experience a problem, contact our customerservice department.
Besure to save your sales receipt asproof of purchase date should you need
warrantyservice.
Withinaperiodof one year frompurchasedate,SonicAlertwill repairor replace
(ourdiscretion) your phone at no cost, ifa defect in materials or workmanship
is found. If we elect to replace your phone, we may replace it with a new or
reconditioned product of the same or similar design.
Repairor replacement will be warranted for a period of 90 days or the original
timeon the original warranty, whichever is longer.
The warranty does not cover accidents, negligence or breakage to any parts.
Thisincludesshippingdamage,failuretofollow instructions,misuse,fire,floods,
use of incompatible accessories,Acts of God or failure in your phone service
carrier’slineservice. The product mustnot be tampered withor taken apart by
anyone who is not an authorized SonicAlert representative. Tampering with
the phone will void ant written or implied warranties Sonic Alert shall not be
responsiblefor loss of time, inconvenience, property damagecaused by your
phoneor any other accidental or consequential damages.Warrantyservice is
availableonlywith proof of purchase.
Simply send theAmpliPHOTO50 (postpaid) and a copy of your sales slip as
proofof purchase to:
SonicAlert Inc., 1050 E. Maple Road, Troy MI 48083
IMPORTANT:YOUR RECEIPTIS PARTOFYOURWARRANTYANDMUST
BERETAINEDANDPRODUCED INTHEEVENTOFAWARRANTYCLAIM.
Sonic Alert
1050 East Maple Rd.
Troy,MI48083
Ph:248577 5400
Fax:[phone]
www.sonicalert.com
Guarantee

15
Sommaire
Description 16
Installation
- Raccordements 17
- Montage mural 17
Réglages
- Niveau de sonnerie 18
Utilisation
- Répondre à un appel 19
-Appeler 19
- Rappel du dernier numéro composé (bis) 19
- Flash 20
- Réglage du volume de réception 20
Fonction Mémoire
- Enregistrer des numéros en mémoires 21
-Appeller un numéro en mémoire 22
Insérer des photos 23
Déclaration de conformité 24
Garantie 26

16
Description
1. Ecouteur
2. Microphone
3. Bouton raccroché/décroché
4. Index des mémoires
5. Bouton mémoire directe M1
6. Commutateur mémoire Direct / Normal («One touch / Normal»)
7. Commutateur de sonnerie
8. Voyant sonnerie
9. Bouton mémoire directe 911
10.Bouton programmation mémoire
11. Touches de numérotation
12. Touche BIS
13. Bouton pour accès mémoires par les photos
14. Contrôle de volume du combiné
15. Touche «FLASH» ( R)
Description

17
Raccordement du combiné
Connectez le cordon en spirale d’un côté dans la prise située à gau-
che du téléphone, de l’autre dans la prise inférieure du combiné.
Raccordement du cordon téléphonique
Connecter le cordon de ligne téléphonique d’un côté dans la prise
située à l’arrière du téléphone puis de l’autre dans la prise téléphoni-
que murale (*).
(*) ClasséeTNV-3 selon la norme standard EN60950
Montage mural
Votre téléphone a la possibilité d’être fixé au mur.
Percez 2 trous dans le mur , insérer chevilles et vis, laissez
dépasser de 6-7mm la tête.
Positionnez les vis dans les orifices comme décrit ci-dessous, puis
appuyez de haut en bas pour la fixation.
Installation
Trous de fixation murale

18
Réglage de la sonnerie
Positions : OFF / LO / HI
Positionnez le commutateur situé à l’arrière de l’appareil .
La position OFF ne vous permettra pas d’entendre la sonnerie seul
le voyant rouge vous avertira d’un appel.
Positionnez sur LO (volume bas) ou HI (volume plus élevé) selon
votre souhait .
Réglages

19
Répondre à un appel
- Lors d’un appel entrant , votre téléphone sonne (*) et le voyant
rouge clignote, décrochez le combiné pour établir la communication.
- A la fin de l’appel , replacez bien le combiné dans le socle pour
libérer la ligne.
(*) : Si vous avez positionné l’interrupteur de sonnerie sur OFF seul
le voyant clignotera.
Appeler
- Décrochez le combiné.
- Composez le numéro de votre correspondant.
- La conversation terminée, raccrochez le combiné pour libérer la li-
gne.
Rappel du dernier numéro composé
- Décrochez le combiné.
-Appuyez sur la touche REDIAL le numérode votre correspondant se
recompose automatiquement (ne fonctionne pas pour les numéros
en mémoire).
NOTE: Vous pouvez recomposer ce même numéro autant de fois
que vous le désirez si vous n’avez pas entré de nouveaux numéros.
Cette fonction sert uniquement pour le dernier numéro.
Utilisation

20
Flash
Cette touche (appelée aussi touche R) sert dans certains cas bien
précis, comme pour des services fournis par votre opérateur ( appel
en attente, conférence à trois, ...) .
Rapprochez vous de celui-ci pour obtenir les renseignements né-
cessaires.
Réglage du volume de réception
A l’avant du téléphone vous disposez d’un bouton VOLUME vous
permettant d’ajuster, en le déplaçant vers la droite ou la gauche, le
volume d’écoute du combiné.
gauche : volume mini
droite : volume maxi
Utilisation