Geemarc AMPLIDECT 280 User manual

0
English
AMPLIDECT™ 285
AMPLIDECTTM280/285
Amplified cordless telephone

1
Contents 1
Introduction 3
Unpacking 4
General Description 5
Key Description 10
LCD Window Icons Description 13
Connecting Lines 15
Installing Batteries 15
Charging Handset 17
Using Handset Carrying Clip 18
Using Headset (optional) 19
Wall Mounting 19
Turning Handset On/Off 20
Basic Functions 22
Making a call 22
Receiving a call 23
Muting the Microphone 24
Amplification function 24
Ringer Setting 25
Last Number Redial 26
CID Book 28
Torch 32
key lock 32
Auto Answer 33
Selecting a Language 34
HS Name 35
Range Alarm 35
CONTENTSCONTENTS

2
Paging 36
Dial Mode 37
Handsfree 38
Flash Signal 39
Advanced Functions 40
Menu Navigation 40
Menu Map 41
Phone Book 43
One-Touch Memories 47
BS Settings 48
HS Settings 51
Registration 58
Calling with more than one Handset 59
Caller ID on call waiting 61
TAM Functions(AMPLIDECT™285only) 63
Announcement 63
Message 67
TAM Setting 70
Remote Control 75
Feature List 77
Troubleshooting 80
(AMPLIDECT™285only) 81
Technical Specifications 82
CONTENTS

3
Congratulations on purchasing your Geemarc
AD280-285 telephone. This telephone offers all the
advantages of cordless technology (compliant with
Digitally Enhanced Cordless Telecommunications-DECT
standard) together with an easy to see big button keypad,
ideal for those who suffer with poor sight. This
telephone is also hearing aid compatible.
Its is important that you read the instructions below in
order to use your Geemarc telephone to its full potential.
Keep this user guide in a safe place for future reference.
This guide explains how to use the following telephone:
AD280-285
AMPLIDECT™ 285
INTRODUCTION

4
Unpacking
When unpacking the telephone, you should find the
following in the box:
y1 AD280-285 handset
y1 AD280-285 base
y1 Mains power adaptor
y3 AAA Ni-MH Batteries
y1 Telephone line cord
y1 Carrying clip
y1 User Guide
* The shape of the plugs can vary according to each country’s
specification.
For product support and help visit our website at
www.geemarc.com
Telephone [phone]
Or fax [phone]
INTRODUCTION

5
General Description
Handset Description (front)
DESCRIPTION
key
Display
# key
Microphone
Visual ringer
One-touch
Memories
M1 to M4
Right soft key
Right key
Down key
End key
Earpiece
Up key
Left key
Left soft key
Dial key
Alphanumeric
keys
*

6
Handset Description (Rear)
DESCRIPTION
Carrying clip
Speaker
Battery
compartment
cover
Charging contacts

7
Handset Description (Side)
AMP : Extra amplification on handset up to 15dB
Vol +/- : Adjustable volume control with the headset or on
handsfree mode
Tone : Adjustable tone control (Hi/Normal/Low)
PRIOR TO USE
DESCRIPTION
Tone Control
Amplify
(AMP)
Button
Volume
Control
Headset
Jack

8
Base Description (Top) : AMPLIDECTTM 285
Base Description (Base)
DESCRIPTION
Charge pins
Previous Message/
Next message
Base display
Tam On/Off
Phone Line
Jack
Power Jack
Paging
Speaker
Announce 1/2
Speaker phone
setting
Micro
p
hone
Play/Stop
Erase message

9
Base Description (Top) : AMPLIDECT280TM HS
DESCRIPTION
Charge pins
Paging

10
Keys Description
Handset
Dial key
Make/Answer a call.
End key
End a call.
Long press to activate power on/off, as
described in page 20.
Navigation key:
Up key
Scroll up through lists and menu
options.
Increase the earpiece/speakerphone
volume during a call.
Enter the CID book, as described in
page 29.
Down key
Scroll down through lists and menu
options.
Decrease the earpiece/speakerphone
volume during a call.
Enter the Phone book, as described in
page 43.
DESCRIPTION

11
Left key
Set up an internal call to another
handset.
Transfer an incoming call to another
handset.
Set up a conference call with an
external line and an internal handset.
Right key
Enter the redial book, as described in
page 27.
Insert a pause when pre-dialing a
number.
Left/Right soft key
Perform the functions indicated by the
text immediately above the key (on the
bottom line of the display) which
changes dependant on the context.
key
Press and hold to turn on/off keypad
lock function.
Set up a conference call, as described
in page 61.
One-touch memories
Press and hold to turn on/off keypad
DESCRIPTION

12
lock function.
Set up a conference call, as described
in page 61.
key
In Standby mode press and hold this
key until the icon appears to
activate the shaker and visual ringer
function. Press and hold this key again
until the icon disappear to deactivate it.
Base (AMPLIDECT™285 only)
Answer on/off key
Press to turn on or off the answer-record
feature and the phone announces "Answer
on" or "Answer off".
Annc1/Annc2 key
Press to start playing the Announce1 or
Announce2.
Press and hold to record the Announce1 or
Announce2.
Play/Stop key
Press to start or stop the message or Memo
playing.
Del key
When playing an ICM (incoming message),
DESCRIPTION

13
press and hold to delete the current message.
In the active mode (all lights on) press and
hold this key to delete all the messages.
Repeat/Skip key
Press to play the current or next message.
(Press the Repeat key twice to play the
previous message.)
Volume up/down key
When playing announcement or messages,
press to increase or decrease the relevant
volume.
LCD Window Icons Description
New Call
Indicates you have missed one or more
calls.
MSG Waiting
Indicates you have one or more voice
messages.
Off Hook
Indicates the line is engaged.
Hands-free
Indicates the handsfree function is enabled.
Battery Icon
Indicates battery charge level.
DESCRIPTION

14
Shaker Icon
Indicates the shaker and visual ringer is
enabled.
Signal Icon
Indicates the current signal strength. If
the handset is too far from the base, this
icon will blink on the LCD.
Alarm Icon
This icon appears when you set an alarm
to ring at a specified time.
Keypad Lock
This icon appears when the keypad is
locked.
ICM Icon (AMPLIDECT285™ only)
This icon appears when you have new
message(s) in your answering machine.
DESCRIPTION

15
Connecting Lines
1. Connect one end of the phone line cord to the phone
line jack of the base, and the other end to a standard
phone wall outlet.
2. Connect the modular end of the AC power adapter to
the power jack of the base, then plug the AC adapter into
a standard AC wall outlet.
To AC wall outlet To phone wall outlet
Installing Batteries
The rechargeable Ni-MH batteries (AAA size) come with
your phone. Install the battery before using your phone.
1. Slide the battery cover in the direction of the arrow and
pull it out.
2. Insert new batteries as indicated, matching correct
polarity (+,-).
INSTALLATION

16
3. To replace the battery cover, slide the cover up until it
snaps in place.
Notes:
The batteries need to be replaced if they do not recover
their full storage capacities after recharging.
When replacing the batteries, always use good quality
Ni-MH re-chargeable batteries. Never use other batteries
or conventional alkaline batteries.
INSTALLATION

17
Charging Handset
! Important Note: Before initial operation, YOU
SHOULD FULLY CHARGE THE HANDSET for about 15
hours.
To charge the handset, you should place it on the base.
Result: When you place the handset on the base, the
handset automatically turns on.
INSTALLATION

18
Using Handset Carrying Clip
The supplied handset carrying clip allows you to
conveniently carry the handset with you. It clips easily to
your belt, waist band, or shirt pocket.
If you want to remove the carrying clip:
Insert a screw driver along the edge of one of its arms
and release the clip. Then lift it off.
INSTALLATION

19
Using Headset (optional)
The headset jack is located in the left side of the handset
and is a 2.5mm standard plug. Simply plug the headset
into this jack and the headset will be activated.
Note: When the headset is plugged into the headset jack
the microphone on the handset will be deactivated.
Wall mounting
Place the plate for wall mounting under the telephone.
Drill 2 holes in the wall 60 mm apart, insert the wall plugs
and the wall mounting screw. The screws should
protrude 6-7 mm. Fit the base onto the screw-heads and
slide down to secure.
INSTALLATION
Headset Jack
Ear
p
hone
Micro
p
hone
Cli
p