GEM PBA-860 User manual

PBA-860 Micro Switch Bar
Magnet Lock Door Loop
PBA-860
Connect to the request-to-exit contact
N.C.
Com.
N.O.
N.C.
Com.
N.O.
Power
Supply
EM
Lock
(fail-safe)
Fig.A
Directly control the fail-safe magnet lock
Time delay or access
control request to exit
N.C.
Com.
N.O.
N.C.
Com.
N.O.
N.C.
Com.
N.O.
Com.
N.O.
Power
Supply
Time
delay
relay
EM
Lock
(fail-safe)
The PBA-860 Mechanical Micro Switch Bar is focus on emergency exit doors (or other large-scale
type doors) , with a pressure push immediately cut the interior micro switch unlocking the
electromagnet lock or other similar devices.
Copyright Gianni Industries, Inc. All Rights Reserved.
P-MU-PBA860 Ver. H Publish:2010.12.15
N.C.
Com.
N.O.
N.C.
Com.
N.O.
Double pole
micro sw itch output
875
835
60
875(L)*66(W)*61.5mm(D)
Finish: Clear anodized
Switch rated 5 Amp/125VAC
Fig.B

Switch 2 output
(Switch 1 output)
START
Red (N/C)
Black (COM.)
White (N/O)
RESET contact
Adjustable delay timer (1-30 SECONDS)
95db Sounder
RESET RESET
N.C.
COM.
N.O.
CUT INPUT
CUT INPUT
out- out+
RELAY
V- V+
30 1
Power input
Power output
GEM
Electromagneti c lock
(Fail-s afe )
J1 Set contact time for triggering
J2
N.C. / N.O. trigger selectable
Key switch
J3
N.C. / N.O. trigger selectable
for emergency condition
N.O. Tigger
N.C. Tigger
N.O.Tigger
N.C.Tigger
3 seconds constant contacting
(Power)
( )Buzzer
Buzzer
signal output
Signal input for emergency
OUT +/- (Over pass timer
setting prior to cut out power
instantly for emergency
condition)
0.5 second
Manual Instructions
* J1,J2 setting for trigger N.O. or N.C. contact and timer adjustable.
* OUT +/- voltage output eliminated after 1~30 seconds delay timer set, an over pass timer setting OUT +/- prior to cut out power
instantly when emergency (CUT INPUT) condition.
* J3 setting for trigger N.C. or N.O. contact on emergency condition.
* Buzzer and signal output for termination control purpose, contact rated 1.0 Amp.
* Reset Setting to RESET the control system.
* Electromagnet lock is fail-safe version, recommend to use UL approved power supply unit for UPS (Uninterruption Power Supply)
system integration at any time.
* Current rating of 1.25Amp.
* Any accessory that is powered from the out-,out+ has to be able to operate at a minimum voltage of 8.5VDC.
Power supply
PBA-860TDI Micro Switch Bar
The PBA-860TDI Mechanical Micro Switch Bar is focus on emergency exit doors (or other large-scale
type doors) , with a pressure push immediately to cut the interior of micro switch unlocking the
wlwctromagnet lock or other similar devices. Available in 36 “ Standard Sizes in Satin Silver , Red and
Green for versatile applications.
PBA-860TDI control panel wiring diagram
Copyright Gianni Industries, Inc. All Rights Reserved.
P-MU-PBA860 Ver. H Publish:2010.12.15