Gemalto Cinterion User manual

M2M.GEMALTO.COM
Cinterion®Java Terminals
Hardware Interface Description
Version: 02
DocId: EHSxT_BGS5T_HID_v02

GENERAL NOTE
THE USE OF THE PRODUCT INCLUDING THE SOFTWARE AND DOCUMENTATION (THE "PROD-
UCT") IS SUBJECT TO THE RELEASE NOTE PROVIDED TOGETHER WITH PRODUCT. IN ANY
EVENT THE PROVISIONS OF THE RELEASE NOTE SHALL PREVAIL. THIS DOCUMENT CONTAINS
INFORMATION ON GEMALTO M2M PRODUCTS. THE SPECIFICATIONS IN THIS DOCUMENT ARE
SUBJECT TOCHANGEATGEMALTOM2M'SDISCRETION. GEMALTO M2M GMBH GRANTS A NON-
EXCLUSIVE RIGHT TO USE THE PRODUCT. THE RECIPIENT SHALL NOT TRANSFER, COPY,
MODIFY, TRANSLATE, REVERSE ENGINEER, CREATE DERIVATIVE WORKS; DISASSEMBLE OR
DECOMPILE THE PRODUCT OR OTHERWISE USE THE PRODUCT EXCEPT AS SPECIFICALLY
AUTHORIZED. THE PRODUCT AND THIS DOCUMENT ARE PROVIDED ON AN "AS IS" BASIS ONLY
AND MAY CONTAIN DEFICIENCIES OR INADEQUACIES. TO THE MAXIMUM EXTENT PERMITTED
BY APPLICABLE LAW, GEMALTO M2M GMBH DISCLAIMS ALL WARRANTIES AND LIABILITIES.
THE RECIPIENT UNDERTAKES FOR AN UNLIMITED PERIOD OF TIME TO OBSERVE SECRECY
REGARDING ANY INFORMATION AND DATA PROVIDED TO HIM IN THE CONTEXT OF THE DELIV-
ERY OF THE PRODUCT. THIS GENERAL NOTE SHALL BE GOVERNED AND CONSTRUED
ACCORDING TO GERMAN LAW.
Copyright
Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its con-
tents and communication thereof to others without express authorization are prohibited. Offenders will be
held liable for payment of damages. All rights created by patent grant or registration of a utility model or
design patent are reserved.
Copyright © 2014, Gemalto M2M GmbH, a Gemalto Company
Trademark Notice
Gemalto, the Gemalto logo, are trademarks and service marks of Gemalto and are registered in certain
countries. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corpora-
tion in the United States and/or other countries. All other registered trademarks or trademarks mentioned
in this document are property of their respective owners.
EHSxT_BGS5T_HID_v02 2014-05-23
Confidential / Preliminary
Cinterion®Java Terminals Hardware Interface Description
2
Page 2 of 70
Document Name: Cinterion®JavaTerminalsHardwareInterfaceDescription
Version: 02
Date: 2014-05-23
DocId: EHSxT_BGS5T_HID_v02
Status Confidential / Preliminary

Cinterion®Java Terminals Hardware Interface Description
Contents
114
EHSxT_BGS5T_HID_v02 2014-05-23
Confidential / Preliminary
Page 3 of 70
Contents
0 Document History...................................................................................................... 7
1 Introduction.................................................................................................................8
1.1 Related Documents ...........................................................................................9
1.2 Terms and Abbreviations...................................................................................9
1.3 Regulatory and Type Approval Information .....................................................11
1.3.1 Directives and Standards....................................................................11
1.3.2 Safety Precautions..............................................................................14
1.4 Product Label...................................................................................................16
2 Product Concept.......................................................................................................17
2.1 Key Features at a Glance................................................................................17
3 Interface Description ................................................................................................20
3.1 Overview..........................................................................................................20
3.2 Block Diagram..................................................................................................21
3.3 Terminal Circuit................................................................................................22
3.4 Operating Modes .............................................................................................23
3.5 RS-232 Interface..............................................................................................24
3.5.1 9-Pole D-sub Connector .....................................................................24
3.6 USB Interface...................................................................................................25
3.7 Weidmueller GPIO Interface............................................................................25
3.8 Power Supply...................................................................................................29
3.8.1 Turn Java Terminals on......................................................................30
3.8.2 Reset Java Terminals.........................................................................30
3.8.3 Turn Java Terminals off......................................................................30
3.8.4 Disconnecting power supply...............................................................31
3.9 Automatic thermal shutdown............................................................................32
3.10 Hardware Watchdog........................................................................................32
3.11 RTC..................................................................................................................32
3.12 SIM Interface....................................................................................................33
3.13 Status LEDs.....................................................................................................34
3.14 RF Antenna Interface.......................................................................................35
4 Electrical and Environmental Characteristics........................................................36
4.1 Absolute Maximum Ratings.............................................................................36
4.2 Operating Temperatures..................................................................................37
4.3 Storage Conditions ..........................................................................................38
4.4 Electrical Specifications of the Application Interface........................................39
4.4.1 On/Off Control.....................................................................................39
4.4.2 RS-232 Interface.................................................................................39
4.4.3 USB Interface......................................................................................39
4.4.4 Weidmueller GPIO Interface...............................................................40
4.5 Power Supply Ratings......................................................................................41
4.6 Antenna Interface.............................................................................................43

Cinterion®Java Terminals Hardware Interface Description
Contents
114
EHSxT_BGS5T_HID_v02 2014-05-23
Confidential / Preliminary
Page 4 of 70
5 Mechanics, Mounting and Packaging.....................................................................45
5.1 Mechanical Dimensions...................................................................................45
5.2 Mounting the Java Terminals...........................................................................47
5.3 Packaging........................................................................................................48
6 Full Type Approval....................................................................................................49
6.1 Gemalto M2M Reference Setup ......................................................................49
6.2 Restrictions......................................................................................................50
6.3 CE Conformity..................................................................................................50
6.4 EMC.................................................................................................................50
6.5 Compliance with FCC and IC Rules and Regulations .....................................51
7 List of Parts and Accessories..................................................................................53
8 Appendix A: (Hardware) Watchdog.........................................................................54
8.1 Reset Conditions..............................................................................................54
8.1.1 Reset stages.......................................................................................55
8.1.2 Reset Delay ........................................................................................55
8.2 Restart Conditions ...........................................................................................55
8.3 Configuration via ASC0 Interface.....................................................................56
8.3.1 Command Specification......................................................................56
8.4 Configuration via I2C Interface.........................................................................65
8.4.1 Command Specification......................................................................65

Cinterion®Java Terminals Hardware Interface Description
Figures
5
EHSxT_BGS5T_HID_v02 2014-05-23
Confidential / Preliminary
Page 5 of 114
Figures
Figure 1: Sample Java Terminal label (BGS5T USB)....................................................16
Figure 2: Java Terminals 3D view..................................................................................20
Figure 3: Block diagram .................................................................................................21
Figure 4: Java Terminals circuit block diagram..............................................................22
Figure 5: Pin assignment RS-232 (D-sub 9-pole female)...............................................24
Figure 6: EHS5T RS485: Weidmueller connectors (8-pin and 12-pin)...........................25
Figure 7: EHS6T USB: Weidmueller connectors (8-pin and 12-pin)..............................26
Figure 8: BGS5T USB: Weidmueller connectors (8-pin and 12-pin)..............................26
Figure 9: 6-pole Western jack for power supply, ignition, reset, typical connection.......29
Figure 10: SIM interface...................................................................................................33
Figure 11: Status LED......................................................................................................34
Figure 12: Antenna connector..........................................................................................35
Figure 13: Java Terminals 3D overview...........................................................................45
Figure 14: Java Terminals mechanical dimensions .........................................................46
Figure 15: Mounting the Java Terminals..........................................................................47
Figure 16: Reference equipment for approval..................................................................49
Figure 17: Hardware watchdog........................................................................................54
Figure 18: Write data to address register.........................................................................68
Figure 19: Read data from address register.....................................................................69

Cinterion®Java Terminals Hardware Interface Description
Tables
6
EHSxT_BGS5T_HID_v02 2014-05-23
Confidential / Preliminary
Page 6 of 70
Tables
Table 1: Cinterion®Java Terminals overview .................................................................8
Table 2: Terms and abbreviations...................................................................................9
Table 3: Directives ........................................................................................................11
Table 4: Standards of North American type approval...................................................11
Table 5: Standards of European type approval.............................................................11
Table 6: Requirements of quality ..................................................................................12
Table 7: Standards of the Ministry of Information Industry of the
People’s Republic of China.............................................................................13
Table 8: Toxic or hazardous substances or elements with defined concentration
limits................................................................................................................13
Table 9: Java Terminals label information ....................................................................16
Table 10: Overview of operating modes .........................................................................23
Table 11: 9-pole D-sub (female) RS-232........................................................................24
Table 12: Weidmueller pin availability.............................................................................27
Table 13: Female 6-pole Western plug for power supply, ignition, power down.............29
Table 14: Allowed maximum antenna gain (including cable loss)...................................35
Table 15: Absolute maximum ratings..............................................................................36
Table 16: Operating supply voltage for Java Terminals..................................................36
Table 17: Board temperature of Java module.................................................................37
Table 18: Storage conditions ..........................................................................................38
Table 19: On/Off control line specifications.....................................................................39
Table 20: RS-232 interface specifications.......................................................................39
Table 21: Weidmueller GPIO interface specifications (requirements) ............................40
Table 22: Power supply specifications............................................................................41
Table 23: RF Antenna interface GSM / UMTS................................................................43
Table 24: List of parts and accessories...........................................................................53
Table 25: Address register for I2C commands................................................................66
Table 26: I2C status result codes....................................................................................67

Cinterion®Java Terminals Hardware Interface Description
0 Document History
7
EHSxT_BGS5T_HID_v02 2014-05-23
Confidential / Preliminary
Page 7 of 70
0 Document History
Preceding document: "Cinterion®Java Terminals Hardware Interface Description" Version 01
New document: "Cinterion®Java Terminals Hardware Interface Description" Version 02
New document: "Cinterion®Java Terminals Hardware Interface Description" Version 01
Chapter What is new
1.4 Revised product label shown in Figure 1.
3.7 Revised section with regard to the Weidmueller pin availability.
4.1 Completed Table 15 giving absolute maximum ratings.
4.2 Added remarks on board temperature.
4.5 Revised and completed section listing power supply ratings.
6.3 Added CE conformity mark.
6.5 Revised section to include notes for IC (also in the Frensh language).
8Revised and updated Appendix A: (Hardware) Watchdog.
Chapter What is new
--- Initial document setup.

Cinterion®Java Terminals Hardware Interface Description
1 Introduction
16
EHSxT_BGS5T_HID_v02 2014-05-23
Confidential / Preliminary
Page 8 of 70
1 Introduction
This document1describes the hardware of the Cinterion®Java Terminals. The Java Terminals
come in three variants depending on the included Cinterion®module and the available interfac-
es:
•EHS5T RS485 contains a Cinterion®EHS5-E module and implements a USB 2.0 interface
with a USB-B connector as well as a 6-pole Western jack as plug-in power supply connec-
tor. Via a Weidmüller GPIO connectors it also implements a RS-485 interface including
power supply and ignition line.
•EHS6T USB contains a Cinterion®EHS6 module and implements a USB 2.0 interface with
a USB-B connector and also a V.24 / V.28 RS-232 interface with a D-sub 9-pole female
socket as well as a 6-pole Western jack as plug-in power supply connector.
•BGS5T USB contains a Cinterion®BGS5 module and implements a USB 2.0 interface with
a USB-B connector and also a V.24 / V.28 RS-232 interface with a D-sub 9-pole female
socket as well as a 6-pole Western jack as plug-in power supply connector.
Wherever necessary and appropriate this document distinguishes between these three vari-
ants.
Table 1 gives a short overview of the available interfaces for the different Java Terminals.
The scope of this document includes interface specifications, electrical as well as mechanical
characteristics of the Java Terminals. It specifies standards pertaining to wireless applications
and outlines requirements that must be adhered to for successful product design. The Java
Terminals are compact GSM/UMTS modems for the transfer of data in GSM/UMTS networks.
Industrial standard interfaces and an integrated SIM card reader allow using the Java Termi-
nals easily as GSM/GPRS/UMTS terminals.
1. The document is effective only if listed in the appropriate Release Notes as part of the technical
documentation delivered with your Gemalto M2M product.
Table 1: Cinterion®Java Terminals overview
Module/Interface EHS5T RS485 EHS6T USB BGS5T USB
Cinterion®module EHS5-E EHS6 BGS5
RS-232 (Sub-D) - 
USB (USB-B)  
Weidmüller connector
(GPIOs, SPI, I2C, RS-485) (no RS-485) (no RS-485, no SPI)
Power supply (RJ-11)  
RF antenna  

Cinterion®Java Terminals Hardware Interface Description
1.1 Related Documents
16
EHSxT_BGS5T_HID_v02 2014-05-23
Confidential / Preliminary
Page 9 of 70
1.1 Related Documents
[1] AT Command Set for your Java Terminal product
[2] Release Notes for your Java Terminal product
To visit the Gemalto M2M GmbH Website please use the following link:
http://m2m.gemalto.com
1.2 Terms and Abbreviations
Table 2: Terms and abbreviations
Abbreviation Description
ARP Antenna Reference Point
ATC AT Command
BTS Base Transceiver Station
CB Cell Broadcast
CODEC Coder-Decoder
DCE Data Circuit terminating Equipment
DSR Data Set Ready
DTR Data Terminal Ready
EFR Enhanced Full Rate
EGSM Enhanced GSM
EMC Electromagnetic Compatibility
ESD Electrostatic Discharge
ETS European Telecommunication Standard
FDMA Frequency Division Multiple Access
G.C.F. GSM Conformity Forum
GSM Global Standard for Mobile Communication
HW Hardware
IC Integrated Circuit
IF Intermediate Frequency
IMEI International Mobile Equipment Identifier
I/O Input/ Output
IGT Ignition
ISO International Standards Organization
ITU International Telecommunications Union
kbps kbits per second
LVD Low voltage Directive

Cinterion®Java Terminals Hardware Interface Description
1.2 Terms and Abbreviations
16
EHSxT_BGS5T_HID_v02 2014-05-23
Confidential / Preliminary
Page 10 of 70
Mbps Mbits per second
MMI Machine Machine Interface
MO Mobile Originated
MS Mobile Station
MT Mobile Terminated
NC Not Connected
NTC Negative Temperature Coefficient
PA Power Amplifier
PCB Printed Circuit Board
PCM Pulse Code Modulation
PCS Personal Communication System
PD Power Down
PDU Protocol Data Unit
R&TTE Radio and Telecommunication Terminal Equipment
RF Radio frequency
RI Ring Indication
RX Receive direction
SIM Subscriber Identification Module
SMS Short Message Service
SW Software
TDD Time Division Duplex
TDMA Time Division Multiple Access
TX Transmit direction
UART Universal Asynchronous Receiver and Transmitter
Table 2: Terms and abbreviations
Abbreviation Description

Cinterion®Java Terminals Hardware Interface Description
1.3 Regulatory and Type Approval Information
16
EHSxT_BGS5T_HID_v02 2014-05-23
Confidential / Preliminary
Page 11 of 70
1.3 Regulatory and Type Approval Information
1.3.1 Directives and Standards
Java Terminals have been designed to comply with the directives and standards listed below1.
1. Standards of North American type approval do not apply to EHS5T RS485, 3G/WCDMA related
standards do not apply to BGS5T USB.
Table 3: Directives
99/05/EC Directive of the European Parliament and of the council of 9 March 1999
on radio equipment and telecommunications terminal equipment and the
mutual recognition of their conformity (in short referred to as R&TTE Direc-
tive 1999/5/EC).
The product is labeled with the CE conformity mark
2002/95/EC (RoHS 1)
2011/65/EC (RoHS 2) DirectiveoftheEuropean Parliamentand ofthe Council of 27 January 2003 (and revised on 8 June 2011) on the
restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS)
2002/96/EC Directive of the European Parliament and of the Council on waste electri-
cal and electronic equipment (WEEE)
2003/108/EC Directive of the European Parliament and of the Council of 8 December
2003 amending directive 2002/96/ec on waste electrical and electronic
equipment (WEEE)
Table 4: Standards of North American type approval
CFR Title 47 “Code of Federal Regulations, Part 15 B, Part 22 and Part 24 (Telecom-
munications, PCS)”; US Equipment Authorization FCC
OET Bulletin 65
(Edition 97-01) Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields
UL 60 950-1 Product Safety Certification (Safety requirements)
NAPRD.03 V5.15 “Overview of PCS Type certification review board
Mobile Equipment Type Certification and IMEI control”
PCS Type Certification Review board (PTCRB)
RSS102 (Issue 4)
RSS132 (Issue 3)
RSS133 (Issue 6)
Canadian Standard
IEEE Std. C95.1-1999 IEEE Standard for Safety Levels with Respect to Human Exposure to
Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz
Table 5: Standards of European type approval
3GPP TS 51.010-1 “Digital cellular telecommunications system (Phase 2); Mobile Station
(MS) conformance specification”
ETSI EN 301 511 V9.0.2 Candidate Harmonized European Standard (Telecommunications series)
Global System for Mobile communications (GSM); Harmonized standard
for mobile stations in the GSM 900 and DCS 1800 bands covering essen-
tial requirements under article 3.2 of the R&TTE directive (1999/5/EC)
(GSM 13.11 version 7.0.1 Release 1998)
GCF-CC V3.49 Global Certification Forum - Certification Criteria

Cinterion®Java Terminals Hardware Interface Description
1.3 Regulatory and Type Approval Information
16
EHSxT_BGS5T_HID_v02 2014-05-23
Confidential / Preliminary
Page 12 of 70
ETSI EN 301 489-1
V1.9.2 Candidate Harmonized European Standard (Telecommunications series) Electro Magnetic Compatibility and Radio spectrum Matters (ERM); Elec-
tro Magnetic Compatibility (EMC) standard for radio equipment and ser-
vices; Part 1: Common Technical Requirements
ETSI EN 301 489-7
V1.3.1 Candidate Harmonized European Standard (Telecommunications series) Electro Magnetic Compatibility and Radio spectrum Matters (ERM); Elec-
tro Magnetic Compatibility (EMC) standard for radio equipment and ser-
vices; Part 7: Specific conditions for mobile and portable radio and
ancillary equipment of digital cellular radio telecommunications systems
(GSM and DCS)
ETSI EN 301 489-24
V1.5.1 Electromagnetic Compatibility and Radio spectrum Matters (ERM); Elec- tromagnetic Compatibility (EMC) standard for radio equipment and ser-
vices; Part 24: Specific conditions for IMT-2000 CDMA Direct Spread
(UTRA) for Mobile and portable (UE) radio and ancillary equipment
ETSI EN 301 908-01
V5.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT-2000 Third Generation
cellular networks; Part 1: Harmonized EN for IMT-2000, introduction and
common requirements of article 3.2 of the R&TTE Directive
ETSI EN 301 908-02
V5.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT-2000 Third Generation
cellular networks; Part 2: Harmonized EN for IMT-2000, CDMA Direct
Spread (UTRA FDD) (UE) covering essential requirements of article 3.2 of
the R&TTE Directive
EN 62311-2008 Assessment of electronic and electrical equipment related to human expo-
sure restrictions for electromagnetic fields (0 Hz - 300 GHz)
EN 60950-1 (2006)+
A11:2009+A1:2010+
AC:2011+A12:2011
Safety of information technology equipment
Table 6: Requirements of quality
IEC 60068 Environmental testing
DIN EN 60529 IP codes
Table 5: Standards of European type approval

Cinterion®Java Terminals Hardware Interface Description
1.3 Regulatory and Type Approval Information
16
EHSxT_BGS5T_HID_v02 2014-05-23
Confidential / Preliminary
Page 13 of 70
Table 8: Toxic or hazardous substances or elements with defined concentration limits
Table 7: Standards of the Ministry of Information Industry of the People’s Republic of China
SJ/T 11363-2006 “Requirements for Concentration Limits for Certain Hazardous Sub-
stances in Electronic Information Products” (2006-06).
SJ/T 11364-2006 “Marking for Control of Pollution Caused by Electronic
Information Products” (2006-06).
Accordingto the“Chinese Administrationonthe Control
of Pollution caused by Electronic Information Products”
(ACPEIP)theEPUP,i.e., Environmental Protection Use
Period, of this product is 20 years as per the symbol
shown here, unless otherwise marked. The EPUP is valid only as longas
the product is operated within the operating limits described in the Hard-
ware Interface Description.
Please see Table 1.3.2 for an overview of toxic or hazardous substances
or elements that might be contained in product parts in concentrations
above the limits defined by SJ/T 11363-2006.

Cinterion®Java Terminals Hardware Interface Description
1.3 Regulatory and Type Approval Information
16
EHSxT_BGS5T_HID_v02 2014-05-23
Confidential / Preliminary
Page 14 of 70
1.3.2 Safety Precautions
The following safety precautions must be observed during all phases of the operation, usage,
service or repair of anycellular terminal or mobileincorporating Java Terminals.Manufacturers
of the cellular terminal are advised to convey the following safety information to users and op-
erating personnel and incorporate these guidelines into all manuals supplied with the product.
Failure to comply with these precautions violates safety standards of design, manufacture and
intended use of the product. Gemalto M2M GmbH assumes no liability for customer’s failure to
comply with these precautions.
When in hospitals or other health care facilities, observe the restrictions on the use
of mobiles. Switch off the cellular terminal or mobile if to be instructed to do so by
the guidelines posted in sensitive areas. Medical equipment may be sensitive to RF
energy.
The operation of cardiac pacemakers, other implanted medical equipment and
hearing aids can be affected by interference from cellular terminals or mobiles
placed close to the device. If in doubt about potential danger, contact the physician
or the manufacturer of the device to verify that the equipment is properly shielded.
Pacemaker patients are advised to keep their hand-held mobile away from the
pacemaker, while it is on. This personalsubgroup always should check thedistance
to the mobile.
Switch off the cellular terminal or mobile before boarding an aircraft. Make sure it
cannot be switched on inadvertently. The operation of wireless appliances in an air-
craft is forbidden to prevent interference with communications systems. Failure to
observe these instructions may lead to the suspension or denial of cellular services
to the offender, legal action, or both.
Check the local and actual laws about these themes.
Do not operate the cellular terminal or mobile in the presence of flammable gases
or fumes. Switch off the cellular terminal when you are near petrol stations, fuel
depots, chemical plants or where blasting operations are in progress. Operation of
any electrical equipment in potentially explosive atmospheres can constitute a
safety hazard.
Yourcellular terminalor mobile receives and transmits radio frequencyenergy while
switched on. Remember that interference can occur if it is used close to TV sets,
radios, computers or inadequately shielded equipment. Follow any special regula-
tions and always switch off the cellular terminal or mobile wherever forbidden, or
when you suspect that it may cause interference or danger.
Road safety comes first! Do not use a hand-held cellular terminal or mobile while
driving a vehicle unless it is securely mounted in a holder for speakerphone opera-
tion. Before making a call with a hand-held terminal or mobile park the vehicle.
Speakerphones must be installed by qualified personnel. Faulty installation or oper-
ation can constitute a safety hazard.
Check the actual and local laws about these themes.

Cinterion®Java Terminals Hardware Interface Description
1.3 Regulatory and Type Approval Information
16
EHSxT_BGS5T_HID_v02 2014-05-23
Confidential / Preliminary
Page 15 of 70
IMPORTANT!
Cellular terminals or mobiles operate using radio signals and cellular networks. In
that case connections cannot be guaranteedat all times under all conditions. There-
fore, you should never rely solely upon any wireless device for essential communi-
cations, for example emergency calls.
Remember, in order to make calls or receive calls the cellular terminal or mobile
must be switched on in a service area with adequate cellular signal strength.
Some networks do not allow for emergency calls if certain network services or
phone features are in use (e.g. lock functions, fixed dialing etc.). You may need to
deactivate those features before you can make an emergency call.
Some networks require a valid SIM card to be properly inserted in the cellular ter-
minal or mobile.
If a power supply unit is used to supply the device it must meet the demands placed
on SELV circuits in accordance with EN60950. The maximum permissible connec-
tion length between the device and the supply source should not exceed 3m.
According to the guidelines for human exposure to radio frequency energy, an
antenna connected to the FME jack of the device should be placed at least 20cm
away from human bodies.

Cinterion®Java Terminals Hardware Interface Description
1.4 Product Label
16
EHSxT_BGS5T_HID_v02 2014-05-23
Confidential / Preliminary
Page 16 of 70
1.4 Product Label
The label fixed to the bottom of a Java Terminal comprises the following information.
Figure 1: Sample Java Terminal label (BGS5T USB)
Table 9: Java Terminals label information
No. Information
1 Cinterion logo
2 Product name
3 Product variant
4 Marking "Made in Germany"
5 Product ordering number
6 Barcode (Code128)
7 Product IMEI
8 Date code
9 WEEE symbol (see Table 3)
10 Chinese RoHS symbol (see Table 7)
11 CE logo with fixed notified body number (may be replaced for samples with "Not for sale")
12 FCC ID
13 IC ID
14 Manufacturer code
15 Power supply unit ratings
16 Manufacturer code (2D)
1234
5
6
7
8
9
10
12
13
14
15 16
11

Cinterion®Java Terminals Hardware Interface Description
2 Product Concept
19
EHSxT_BGS5T_HID_v02 2014-05-23
Confidential / Preliminary
Page 17 of 70
2 Product Concept
2.1 Key Features at a Glance
Feature Implementation
General
Incorporates Cinterion®
Java module The Java module handles all signal and data processing within the Java Terminals. Internalsoftware runs the application interface and the complete
GSM/UMTS protocol stack.
Frequency bands EHS5T RS485 (with EHS5-E module):
GSM/GPRS/EDGE: Dual band GSM 900/1800MHz
UMTS/HSPA+: Dual band UMTS 900/2100MHz
EHS6T USB (with EHS6 module):
GSM/GPRS/EDGE: Quad band 850/900/1800/1900MHz
UMTS/HSPA+: Five band 800/850/900/1900/2100MHz
BGS5T USB (with BGS5 module):
GSM/GPRS: Quad band 850/900/1800/1900MHz
GSM class Small MS
Output power (according
to Release 99, V5)
depending on frequency
band supported by mod-
ule
Class 4 (+33dBm ±2dB) for EGSM850
Class 4 (+33dBm ±2dB) for EGSM900
Class 1 (+30dBm ±2dB) for GSM1800
Class 1 (+30dBm ±2dB) for GSM1900
Class E2 (+27dBm ± 3dB) for GSM 850 8-PSK
Class E2 (+27dBm ± 3dB) for GSM 900 8-PSK
Class E2 (+26dBm +3 /-4dB) for GSM 1800 8-PSK
Class E2 (+26dBm +3 /-4dB) for GSM 1900 8-PSK
Class 3 (+24dBm +1/-3dB) for UMTS 2100, WCDMA FDD BdI
Class 3 (+24dBm +1/-3dB) for UMTS 1900,WCDMA FDD BdII
Class 3 (+24dBm +1/-3dB) for UMTS 900, WCDMA FDD BdVIII
Class 3 (+24dBm +1/-3dB) for UMTS 850, WCDMA FDD BdV
Class 3 (+24dBm +1/-3dB) for UMTS 800, WCDMA FDD BdVI
The values stated above are maximum limits. According to Release 99, the
maximum output power in a multislot configuration may be lower. The nom-
inal reduction of maximum output power varies with the number of uplink
timeslots used and amounts to 3.0dB for 2Tx.
Power supply Single supply voltage 8V to 30V
Operating temperature Normal operation: -30°C to +85°C
Extended operation: -40°C to -30°C and +85°C to +90°C
Physical Dimensions: 113.5mm x 75mm x 25.5mm
(excluding antenna and serial interface connectors)
Weight: 120g (approx.)
RoHS, WEEE All hardware components are fully compliant with the EU RoHS and WEEE
Directives
HSPA features
3GPP Release 6,7
(EHSxT only) DL 7.2Mbps, UL 5.7Mbps HSDPA Cat.8 / HSUPA Cat.6 data rates
Compressed mode (CM) supported according to 3GPP TS25.212

Cinterion®Java Terminals Hardware Interface Description
2.1 Key Features at a Glance
19
EHSxT_BGS5T_HID_v02 2014-05-23
Confidential / Preliminary
Page 18 of 70
UMTS features
3GPP Release 4
(EHSxT only) PS data rate – 384 kbps DL / 384 kbps UL CS data rate – 64 kbps DL / 64 kbps UL
GSM / GPRS / EDGE features
Data transfer GPRS:
• Multislot Class 12
• Full PBCCH support
• Mobile Station Class B
• Coding Scheme 1 – 4
EGPRS (EHSxT only):
• Multislot Class 12
• EDGE E2 power class for 8 PSK
• Downlink coding schemes – CS 1-4, MCS 1-9
• Uplink coding schemes – CS 1-4, MCS 1-9
• SRB loopback and test mode B
• 8-bit, 11-bit RACH
• PBCCH support
• 1 phase/2 phase access procedures
• Link adaptation and IR
• NACC, extended UL TBF
• Mobile Station Class B
CSD:
• V.110, RLP, non-transparent
• 2.4, 4.8, 9.6, 14.4kbps
• USSD
SMS • Point-to-point MT and MO
• Cell broadcast
• Text and PDU mode
•
Software
AT commands Hayes 3GPP TS 27.007, TS 27.005, Gemalto M2M
Java™ Open Platform Java™ Open Platform with
• Java™ profile IMP-NG & CLDC 1.1 HI
• Secure data transmission via HTTPS/SSL
• Multi-threading programming and multi-application execution
Major benefits: seamless integration into Java applications, ease of pro-
gramming, no need for application microcontroller, extremely cost-efficient
hardware and software design – ideal platform for industrial GSM applica-
tions.
ThememoryspaceavailableforJavaprogramsis around10MBintheflash
file system and around 6MB RAM. Application code and data share the
space in the flash file system and in RAM.
SIM Application Toolkit SAT Release 99
TCP/IP stack Protocols: TCP server/client, UDP, HTTP, FTP, SMTP, POP3
Access by AT commands
Firmware update Upgradeable via serial or USB interface
Feature Implementation

Cinterion®Java Terminals Hardware Interface Description
2.1 Key Features at a Glance
19
EHSxT_BGS5T_HID_v02 2014-05-23
Confidential / Preliminary
Page 19 of 70
Interfaces
USB interfaces USB 2.0 Slave interface
RS232 RS-232 interface for AT commands and data:
• Supports RTS/CTS hardware handshake
• Supports software XON/XOFF flow control
• Multiplex ability according to GSM 07.10 Multiplexer protocol
• Baud rates from 1200bps to 230400bps
• Autobauding supported
Weidmueller connector 20-pin (8-pin and 12-pin) header with GPIO interface, external power sup-
ply, ADC, SPI, I²C and RS-485 option, depending on variant
Power connector 6-pole Western connector (female) for power supply, ignition, power down
signal
SIM card reader Supported SIM cards: 3V, 1.8V
Antenna Antenna connected via female SMA connector
Power on/off, Reset
Power on DTR line at RS-232 interface, IGT_IN line at power connector or watchdog
Power off Normal switch-off by AT^SMSO or external On/Off push button
Automatic switch-off in case of critical temperature conditions
Reset Orderly shutdown and reset by AT command
Emergency restart via RST_IN line at power connector or via watchdog
Special features
Real time clock Timer functions via AT commands
Phonebook SIM card and terminal
(Hardware) Watchdog Configurable watchdog to control module
Feature Implementation

Cinterion®Java Terminals Hardware Interface Description
3 Interface Description
35
EHSxT_BGS5T_HID_v02 2014-05-23
Confidential / Preliminary
Page 20 of 70
3 Interface Description
3.1 Overview
Java Terminals provide the following interfaces for power supply, antenna, SIM card and data
transfer:
• 6-pin Western connector (female) for power supply, ignition, power down signal
• SMA antenna connectors (female) for RF antenna and future Rx diversity or GPS antennas
• SIM card reader
• 9-pin (female) D-sub connector (RS-232 interface)
• 4-pin (female) USB-B connector
• 12-pin and 8-pin Weidmueller GPIO connectors (including RS-485)
Figure 2: Java Terminals 3D view
GPS antenna SMA connector
D-sub socket (RS-232 interface)
Western jack for
USB connector
20-pin Weidmueller connector
SIM card reader
SIM card reader
(for future use,
RJ-45 Ethernet connector
(8-pin and 12-pin)
RF antenna SMA connector Rx diversity antenna SMA connector
(for future use; currently not available)
(for future use,
(not for EHS5T RS485)
power supply
currently not available)
currently not available)