Gemmy AIRBLOWN INFLATABLE User manual

READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
• This is an electrical product - not a toy! To avoid risk of
fire, burns, personal injury, and electric shock, it should
not be played with or placed where small children can
reach it.
• Do not use seasonal products outdoors unless marked
suitable for indoor and outdoor use. When products are
used in outdoor applications, connect the product to a
Ground Fault Circuit Interrupting (GFCI) outlet. If one is
not provided, contact a qualified electrician for proper
installation.
• This seasonal use product is not intended for permanent
installation or use.
• Do not mount or place near gas or electric heaters,
• Do not secure product wiring with staples or nails or place
on sharp hooks or nails.
• Do not let lamps rest on the supply cord or on any wire.
• Unplug the product when leaving the house, when retiring
for the night, or if left unattended.
• Do not use this product for other than its intended
purpose.
• Do not hang ornaments or other objects from cord, wire,
or light string.
Safety Information
• Do not close doors or windows on the product, or
extension cords, as this may damage the wireinsulation.
• Do not cover the product with a cloth, paper, or any
material not part of the product whenin use.
• Do not place the product against carpeting, furniture, or any
other fabric whenin use.
• Read and follow all instructions that are on the product or
provided with the product.
SAVE THESE INSTRUCTIONS
USE AND CARE
INSTRUCTIONS
1. When the product is placed on a live tree, the tree
should be well maintained and fresh. Do not place on
live trees in which the needles are brown or break off
2. If the product is placed on a tree, the tree should be well
secured and stable.
3. Before using and reusing, inspect the product carefully.
Discard any products that have cut, damaged or frayed
wire insulation cords, cracks, lamp holders or enclosures,
loose connections, or exposed copper wire.
4. When storing the product, carefully remove the product
from wherever it is placed, including trees, branches,
or bushes, to avoid any undue strain or stress on the
product conductors, connections and wires.
5. When not in use, store neatly in a cool, dry location
protected from sunlight.
WARNING
1. Do not install on trees having needles, leaves or branch
coverings of metal or materials which look like metal,
and.
2. Do not mount or support wires in a manner that can cut
or damage wire insulation.
This power unit is intended to be correctly
WARNING
Remove all plastic fasteners and tags. These are part of
the packaging and should be discarded.
For indoor and outdoor use.
This item is not a toy. For decorative purposes only.
TROUBLESHOOTING
CHECKLIST
If your Airblown®Inflatable is not inflating, the problem
may be:
1. The power source is disabled or the cord may be
unplugged.
2. The zipper may not be securely fastened, sealing the
Airblown®
3. Something may be blocking the fan’s air intake.
NOTE: ONCE FAN IS UNPLUGGED AND STOPS
BLOWING, YOUR Airblown®
The lights within Airblown®are powered by LED lights
which are designed to operate longer than traditional
bulbs, These LED lights are not replaceable.
WARNING
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
WARNING: READ AND
UNDERSTAND ALL
INSTRUCTIONS.
Failure to follow all instructions listed below, may result in
WARNING:
ELECTRIC PRODUCT. Keep away from children. As
with all electrical products, precautions should be obser-
ved during handling and use to reduce the risk of electric
shock. If the supply cord is damaged, it must be replaced
persons in order to avoid a hazard.
Adults Note: Periodically examine this product for da-
mage to the cord, housing or other parts that may result
damaged, do not use it.
DANGER – To prevent electric shock, do not immerse
in water; wipe clean with damp cloth. Immersing this pro-
duct can result in an electric shock.
CAUTION: Do not attempt to inflate this unit
during unusually strong winds. If it becomes too windy for
conditions.
IMPORTANT SAFETY
INSTRUCTIONS
WHEN USING ELECTRICAL PRODUCTS , BASIC PRE-
CAUTIONS SHOULD ALWAYS BE FOLLOWED INCLU-
DING THE FOLLOWING:
7-E-DTC

FREQUENTLY ASKED
QUESTIONS (FAQ’s)
1. Can I continually run my Airblown®
Yes, you can run your Airblown®
and at night. We recommend that you turn off your Airblown®
retiring for the evening. Otherwise, your Airblown®
2. What happens if my Airblown®
Rips in the Airblown®
thread is required) or taped with clear packing tape.
3. How can I clean my Airblown®
Wipe clean with a damp cloth and allow to dry before
storing away. Use mild detergent if necessary.
4. When I unplug my Airblown®
is this?
Your Airblown®
plugged in and the fan is blowing air.
5. How much electricity does an Airblown®
consume?
It uses about as much energy as a standard string of holiday
lights.
6. What is the best way to store my Airblown®
Store in a bag, box or other storage container and keep in a
cool, dry location.
CAUTION: Changes or modifications not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE:This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• tnereffidtiucricanoteltuonaotnitnempiuqeehttcennoC
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions
should always be practiced including the following:
1. READ AND FOLLOW ALL SAFETY INSTRUC-
TIONS.
2. Read and follow all instructions that are on the
product or provided with the product.
3. Do not use an extension cord.
4. Reference the National Electrical Code, ANSI NFPA
clearances from power and lighting conductors.
5. Installation work and electrical wiring must be
rated construction.
6. Do not install or use within 10 feet of a pool.
7. Do not use in a bathroom.
8.
WARNING:Risk of Electric Shock.
When used outdoors, install only to a covered
Class A GFCI protected receptacle that is
weatherproof with the power unit connected to
the receptacle. If one is not provided, contact a
that the power unit and cord do not interfere with
completely closing the receptacle cover.
9.
WARNING: Risk of Fire. Installation
involves special wiring methods to run wiring
through a building structure. Consult a qualified
electrician.
10. If the connector of this driver does not properly
modify the product and discard product if the
connector is damaged.
11. WARNING:Not for use with receptacles
that are weatherproof only when the receptacle
is covered (attachment plug cap not inserted and
receptacle cover closed).
SAVE THESE INSTRUCTIONS - This manual
contains important safety and operating instructions
for power units.
CAUTION:
1. For temporary (90 days max) installation and use only.
2.
replace lamps or modify wiring or product.
3. Do not place near standing areas of water, such as ponds
and pools.
4. To reduce the likelihood of excessive heat and possible
damage, use only decorative lamp accessories packaged
with this product or marked for use with this product.
5. To reduce the risk of fire and electric shock, use only the
power supply Model MTR-17131 manufactured by (DTC)
that was provided with this product.

These Instructions Are For These Items
11167 11827 11981 14956
15097 26396 34457 35292
36687 36789 36830 37179
38585 39909 58231 60976
64066 64335 64911 64929
70653 71933 73257 73478
73479 86457 87644 87645
88305 88918 89985 110479
110524 110879 110909 111065
111628 111927 111940 112172
112214 113383 113384 113664
114061 114203 114522 114532
114539 114549 114566 114667
114843 114844 115302 115666
115819 116762 116763 116765
116819 116839 116906 117053
117160 117171 117239 117241
117242 117243 117251 117252
117253 117255 117257 117259
117261 117264 117268 117269
117277 117285 117287 117291
117294 117297 117298 117305
117470 117519 117569 117570
117678 118114 118567 118615
118616 118617 118674 118919
119147 119192 119193 119194
119195 119196 119315 119320
119344 119345 119353 119365
119464 119518 220407 220414
220946 220970 221882 221975
222157 222200 222341 222350
222654 222745 223151 223198
224446 222495 224430 224504
224692 225098 225236 225240
225251 225259 225310 225311
226002 226009 226010 226011
226095 226222 226257 226362
226418 226422 226423 226633
226888 226907 226917 226918
226919 226978 227023 227025
227026 227153 227178 227494
227564 227902 227916 225085
226431 63975 118587 118880
119098 119174 220632 220634
220636 116710 46554 225136
448056 448058 448067 34401
43291 44085 44335 48690
14079 113395 440801 445407

Assembly Instructions
Package Contents
Do’s and Don’ts
1.
to stand up straight.
2.
in unusually strong winds.(see caution)
3. Do not unplug by pulling on cord. For
unplugging power supply.
7
AD
Ensure that the air intake on the
other obstructions and that the zipper
more than one zipper.
Connect UL- Listed power supply (D)
into connection of fan, plug power supply
into standard wall outlet .
(B) to each of the attached nylon loops
Using the loops attached at the bottom
(C) into the ground. Adjust weight-bag
desired.
Drive the stakes (C) into ground at a
45-degree angle.
For maximum stability, bring tether down
as shown in the illustration. In order to
achieve this you may need to wrap the
excess tether around the top of the stake.
3
5 6
A
C
A
C
4
2
A
B
B
1
Part Description Quantity
A Airblown®1
B Tethers 2
C Stakes 4
D
UL - listed Power supply
Input:120V-150VAC ~ 50/60Hz
Output: 12 V 0.6A
1
7
D
BC
Visit WWW.GEMMY.COM for more information.
©2021 GEMMY INDUSTRIES CORP.
117 WRANGLER DRIVE. SUITE 100
COPPELL, TX 75019 U.S.A.
1 [phone]
MADE IN CHINA / PRINTED IN CHINA