Taixing microphone using instruction
一. Operation of handhold microphone
1. Turn the microphone to “OFF” position, screw handhold microphone battery
cover in counter-o’clock direction. Insert 9V battery, screw back the cover.
2. Turning the microphone to “ON” position, now the receiver “RF LED”
indicating light on means the wireless microphone starting to work.. Turn the
microphone to “OFF” position if don’t use.
3. If the indicating light of microphone darken evidently, that means the battery is
less power, please change the new battery.
二. Remark:
1. Please avoid to place the receiver board under sunshine directly ,dusty place or
moisture place and try to keep far away from the magnetic field.
2. Please avoid to place the receiver to dead corner in order to keep the good single.
3. Please take out the battery when the microphone not use for a long time so that it
won’t worsen the microphone by the poor battery.
4. Please don’t throw the microphone so as to avoid the serious damage.
