GemOro Platinum M100XP User manual

PREMIUMCLASS micro scale
PLATINUM
M100XP

GemOro 2
Congratulations on your purchase of the premium
class Platinum M100XP precision micro-pocket scale
by GemOro Platinum Scales, the most trusted name in
precision weighing for the jewelry industry! The “M” in
M100XP stands for “micro”, because it is the smallest
scale of its kind in the world. The “XP” stands for
“extra precision”, because it features unbelievable
accuracy of 0.01g!
Your new high-tech, state-of-the-art, miniature
GemOro Platinum M100XP is a very durable,
attractively designed, full featured precision precious
metals scale that is ideal for the retail jeweler, traveling

M100XP Micro Scale 3
gold wholesaler or pawnbroker who wants the best
tools of their trade in as compact of a size and ultra-
portable as possible.
The Platinum M100XP weighs in g, ct, oz, gn, dwt and
ozt and features a bright blue backlit LCD display,
stainless steel weighing platform, mini-rectangular
design with unique 2 button control panel. It also
features pushbutton digital calibration, tare, memory,
overload protection, low battery indication and battery
saving auto-off functions. The Platinum M100XP is
powered by (1) supplied CR2032 lithium battery. It
comes with a dual purpose protective platform cover
which also serves as a useful weighing tray when
detached and flipped upside down and placed on the
weighing platform for holding gold jewelry, findings,
silver beads and more while on its weighing platform.
It also comes with a handy necklace style carrying
strap which attaches to the scale for transporting and
quick access. Please read all instructions prior to
operating.

GemOro 4
GemOro Platinum M100XP
Premium Class Micro-Scale
INSTRUCTIONS FOR USE
CONTROL PANEL BUTTON ID & EXPLANATION
Before using the Platinum M100XP, while being
careful not to apply pressure to the weighing platform,
locate the battery compartment on the bottom of
the scale, slide off the battery compartment door
and carefully insert the (1) supplied battery + side up
into the battery compartment. Replace the battery
compartment door.
1. <I> - ON/OFF
Push the <I> button once to turn the scale on (repeat
the procedure in order to turn the scale off).
2. <I> - TARE
When using the weighing tray or other type of scoop
or container, with the scale turned on, simply place
the tray, etc. on the weighing platform and then push

M100XP Micro Scale 5
the <I> to tare (zero) the weight of the tray or item on
the weighing platform. The scale will automatically
subtract the weight of whatever was on the weighing
platform while maintaining the weight in its memory.
The display will then show 0.00g. If you then take the
tray off of the weighing platform, from its memory
the display will show a negative weight equal to the
weight of the tray or whatever was on the platform.
After placing the tray back on the weighing platform,
you may then place the item that you wish to weigh
directly into the tray and weigh it independently. When
you no longer wish to use the tray, take the item off of
the weighing platform and press the <I> button once
again to bring the display back to 0.00g and take the
weight which was within its memory away.
3. M - UNITS
To change the scales unit of measure, simply push the
M button to change from g, ct, oz, gn, dwt or ozt.
CALIBRATION PROCEDURE
IMPORTANT: Do not attempt to recalibrate this scale

GemOro 6
without first having a 100g calibration weight in your
possession. This weight is available as an optional
accessory from your scale supplier. Note that 20 US
nickels equals 100g. Also, always check to confirm
the batteries have sufficient power or the calibration
procedure may not work properly.
1. If the factory’s preset calibration requires adjusting
as indicated by the accuracy of the scale being off by
more than +/- 0.01g, place the scale on a stable, flat
surface which is free from vibrations and excessive air
currents.
2. When the scale is turned off, press the < I > button
to turn on the scale until 0.00 is displayed. Press and
hold the < M > button until the display shows “CAL”.
3. Release the < M > button and press the < M >
button again until “100.0” flashes on the display.
Place the required 100g weight onto the center of the
platform.

M100XP Micro Scale 7
4. After the required weight is placed on the platform,
the display will show PASS followed by 100.0g.
5. If the calibration was not successful, please repeat
this procedure again until the calibration procedure
has been completed.
SPECIFICATIONS
1. Capacity: 100g
2. Readability: 0.01g
3. Units of Measure: g, ct, oz, gn, dwt & ozt.
4. Required Battery: 1 x CR2032 lithium battery
located inside scale bottom battery compartment.
5. Required Calibration Weight: 100g
(sold separately).
6. Auto-off: After 30 seconds.
7. Weight: 38.8g (with battery installed).
8. Not Legal for Trade

GemOro 8
WARRANTY
This durable scale is warranted to perform to the
manufacturers stated specifications as noted above
and if the above referenced care is provided, for a
period not to exceed five years from the original date
of purchase, as confirmed by a copy of the original
sales receipt which must be sent in with the scale,
providing the purchaser first follows the warranty
registration procedure. Please note that the scales
batteries are not covered by this warranty. ALWAYS
FIRST TRY REPLACING THE BATTERY WITH A
NEW ONE, AS WELL AS ATTEMPT CALIBRATING
THE SCALE PRIOR TO CLAIMING WARRANTY
COVERAGE. In the event of the scale becoming
defective within the stated warranty period and it is
determined by the factory that no user abuse was
the cause of the defect, the scale may be repaired
or replaced at the factory’s sole discretion. No other
written or implied warranty shall apply. In the unlikely

M100XP Micro Scale 9
event of a scale defect and providing the warranty
registration procedure has been followed; please
return the defective scale to your scale supplier or to
the address below along with a copy of your original
sales receipt for warranty service. No contaminated
scale will be accepted and if received in this condition
it will automatically be destroyed with no recourse
from its owner, while the warranty replacement will be
revoked. This scale is not intended for illegal use.
Note: Please fill out the Warranty Registration form on
our website:
www.gemoroproducts.com/warrantyregistration

10455 Olympic Drive
Dallas, Texas 75220 USA
Tel [phone] or 214.351.0380
Fax [phone] or 214.351.1903
www.gemoroproducts.com
[e-mail]