General Hobby Baron 15cc Series User manual

Baron 15cc
Wingspan: 63inch/1600mm
Length: 43.3inch/1100mm
Flying weight: 1800g
Wing Area: 37.9sq.dm
Engine Size:15cc

Main and tail landing gear
Lock the wheels
Use plastic sheet and self-tapping screws to lock the main
landing gear as shown
Insert the tail landing gear wire into the rudder.

Lock the tail wheel plastic sheet onto the fuselage tail by
self-tapping screws.

Main wing
Find out the wing connection wood.
Lock the decorations onto the wings as shown
Fix the wings onto the fuselage by two nylon screws

Rudder and Stabilizer

Cut out the holes on the stab and elevator
Insert the vertical fin into the stab, and the fuselage tail slot
Cut out the holes on the fuselage tail as shown
Lock the stab onto the fuselage tail with aluminum angle as
shown
Fuel tank

Engine
Find out the two pcs of nylon engine support
Lock the engine support onto the fuselage head.
Install the engine onto the engine support

Motor
Find out the motor mount, and other pcs as shown
Cut out the holes on the fuselage head as shown, for the cowl
support.
Hook the motor mount onto the fuselage head, and glue it
tightly
Install the motor onot the motor mount

Cowl
Install the cowl onto the airplane head with self-tapping
crews.

CG=85mm