General Mfg SAFTLITE GLOZONE 9032-7191 Guide

26 LED 120VAC
UV BLACKLIGHT
WARRANTY AND
INSTRUCTION MANUAL

Care & Operation of your New
26 LED UV Blacklight
CAU ION
1. Inspec cord regularly for damage and replace if necessary for user safe y.
2. Do no submerge.
3. When hanging reel models on ceiling:
-By Hook: Close hook wi h pliers o preven reel from coming down.
-By Bracke Pin: Wi h reel in place, bend end of “L” shaped pin o preven pin
falling ou .
-Read moun ing ins ruc ions carefully before ins alling.
4. Use in covered areas ou of rain and wea her.
5. Do no use in applica ions where liquid can run in o or find i s way in o he face of
he LED lamp.
MOUN ING INS RUC IONS FOR MODELS WI H REEL
1. Selec loca ion wi hin 2 fee of an elec rical
ou le .
2. A ach U shaped bracke “A” o solid par of
he wall or ceiling using screws (provided).
3. Place hanger bracke “B” inside U shaped
bracke “A” lining up small holes in bracke s.
4. Inser locking pin “C” hrough lined-up holes.
Be sure o bend he end of locking pin as
shown.
1. Selec loca ion wi hin 2 fee of an elec rical
ou le .
2. Screw he hanger hook securely in o he
ceiling. Hook mus screw in o wood frame
behind drywall.
3. Hang reel on hook.
4. Close hook wi h pliers o preven reel from
coming off. Refer o poin “A”.
5. Adjus cord s op so ligh or ou le hangs a
desired leng h when cord is re rac ed.
OPERA ION & MAIN ENANCE
1. Plug he uni in o a 120 VAC ou le . The power supply cord is UL lis ed and
mee s OSHA s andards.
2. Disconnec he power supply before servicing.
3. Keep he uni free from grease and dir by using a damp clo h wi h mild de ergen .
4. Do no use solven s such as gasoline o clean uni or cord as i makes he par s
bri le.
5. Cau ion: Do no look a UV lamp for ex ended period. Always wear UV pro ec ive
glasses when using ligh .
OP IONAL WALL
OR CEILING
MOUN
INS ALLA ION
CEILING
MOUN
360º RO A ION
Close
Hook
Cord
Stop
C
A
B

5000-2188
5000-0863
5000-0864
5000-0865
5000-0866
5000-0745
5000-0748
5000-0746
5000-0400
5000-0747
5000-6229
5000-6230
5000-6235
RELAMPING INS RUC IONS
S ep l Disconnec he power supply (unplug).
S ep lI To ins all or remove lamp from handle, urn by he collar a he base of
he lamp. Do no use he lamphead o urn as i may cause damage.
Note: We recommend you use ONLY original replacemen par s.
1
2
3
4
5
6
7
8
9
10
26 LED Lamp 120 volt
Handle-26 LED - side 1 (w/ swit h hole) SVT
Handle-26 LED - side 1 (w/ swit h hole) SJT
Handle-26 LED - side 2 SVT
Handle-26 LED - side 2 SJT
Lamp so ket
S rew, Handle (in l. w/ no. 2)
Swit h Assembly w/ Rubber Boot
Conne tor, losed end, Insulated
8” Nylon tie (strain relief)
Cord assy. 20’ 18/2 SVT, bla k reel ordset
Cord assy. 20’ 18/2 SVT, bla k
Reel assy. 50’ 18/2 SVT, bla k
Item Part No. Des ription Qty Required
1
1
1
1
1
1
3
1
5
1
1
1
1
Parts List - 26 LED 120VAC UV Blacklight
9
10
1
8
4
3
2 5
7
7
6
7

FORM # 9032-7191 (06/09/05)
GENERAL MANUFAC URING, INC.
1100 S. MORGAN ST.
BLUFFTON, IN 46714
PHONE: [phone]
FAX: [phone]
This worklight was thoroughly tested and inspected and found to be in
This worklight was thoroughly tested and inspected and found to be in This worklight was thoroughly tested and inspected and found to be in
This worklight was thoroughly tested and inspected and found to be in
perfect working order before leaving our factory. If within 90 days from the
perfect working order before leaving our factory. If within 90 days from the perfect working order before leaving our factory. If within 90 days from the
perfect working order before leaving our factory. If within 90 days from the
date of purchase, any part of this unit proves to be defective in material or
date of purchase, any part of this unit proves to be defective in material or date of purchase, any part of this unit proves to be defective in material or
date of purchase, any part of this unit proves to be defective in material or
workmanship, such defective parts will be repaired or replaced (company
workmanship, such defective parts will be repaired or replaced (company workmanship, such defective parts will be repaired or replaced (company
workmanship, such defective parts will be repaired or replaced (company
option) free of charge. The company s liability in all events is limited to the
option) free of charge. The company s liability in all events is limited to the option) free of charge. The company s liability in all events is limited to the
option) free of charge. The company s liability in all events is limited to the
purchase price paid.
purchase price paid.purchase price paid.
purchase price paid.
The individual LED s are warranted for one year against defects in
The individual LED s are warranted for one year against defects in The individual LED s are warranted for one year against defects in
The individual LED s are warranted for one year against defects in
workmanship and material. The warranty does not apply to damage from
workmanship and material. The warranty does not apply to damage from workmanship and material. The warranty does not apply to damage from
workmanship and material. The warranty does not apply to damage from
power surges, connection to wrong power source, alteration, misuse or
power surges, connection to wrong power source, alteration, misuse or power surges, connection to wrong power source, alteration, misuse or
power surges, connection to wrong power source, alteration, misuse or
abuse, not attribute to the manufacturer, representatives, dealers, or their
abuse, not attribute to the manufacturer, representatives, dealers, or their abuse, not attribute to the manufacturer, representatives, dealers, or their
abuse, not attribute to the manufacturer, representatives, dealers, or their
employees.
employees.employees.
employees.
Illustrations and descriptions are for the sole purpose of identification and
Illustrations and descriptions are for the sole purpose of identification and Illustrations and descriptions are for the sole purpose of identification and
Illustrations and descriptions are for the sole purpose of identification and
do not express or imply a warranty that the products will necessarily
do not express or imply a warranty that the products will necessarily do not express or imply a warranty that the products will necessarily
do not express or imply a warranty that the products will necessarily
conform to the illustrations or descriptions.
conform to the illustrations or descriptions.conform to the illustrations or descriptions.
conform to the illustrations or descriptions.
When returning product for warranty repair , please provide : from
whom purchased, date of purchase, attached receipt or invoice
number.
90 Day Warranty