
ASSEMBLY INSTRUCTIONS
GENERAL PUMP • 1174 Northland Drive • Mendota Heights, MN 55120
Phone:
651.686.2199
•
Fax:
800.535.1745
•
email:
[email protected] •
www.generalpump.com
Ref 310135 Rev B09-20
GENERAL PUMP A member of the Interpump Group
SAFTY PRECAUTIONS
WARNING!
Exposure of skin directly to
pressurized air or fluids could
result in severe bodily injury!
1. Make sure incoming pressure does not exceed
the rated pressure.
2. Use proper eye protection when assembling and
using the hose reel.
3. Assemble the hose reel on a clean workbench
free of debris and moisture.
4. Use soap and water when checking for air leaks.
5. Keep children away from work area.
PARTS LIST
DHRP50150
Hose Reel
ITEM PART # DESCRIPTION QTY
1 2103235 ASSY, SUB, HUB 1
2 2540079 BASE, HOSE REEL 1
3 2203415 WASHER 2
4 2530025 BUSHING 2
5 2720010 SPRING 1
6 2103237 ASSY, CLAMP, HOSE 1
7 2200032 RING 1
1. Connect the handle to the flange. Nuts go on handle side of flange.
2. Use (4) 3/8” or 10 mm bolts when securing the hose reel to ceiling or wall.
3. Use thread sealant (not provided) on inlet threads and on outlet hose (not provided).
4. Attach pigtail end to high pressure pump outlet.
5. Attach hose reel hose to swivel on hose reel
6. The hose reel is ready for operation.
ITEM PART # DESCRIPTION QTY
8 2720004 SPRING 1
9 2530102 PIN, LOCK 1
10 2660231 BUSHING 1
11 2103130 SWIVEL, HOSE REEL, FORGED 1
12 2203416 WASHER, SWIVEL 1
13 2530112 FITTING, 1/2NPT-MX3/8NPT-F 1
14 2103336 FOLDING HANDLE KIT 1
2100278 REPAIR KIT