General Pump DHRHC50100 User manual

DHRHC50100
ACCESSORIES ACCESSORIES
GENERAL PUMP A member of the Interpump Group
SPECIFICATIONS
PART NUMBER DHRHC50100
3/8" Hose Capacity 100 ft.
1/4" Hose Capacity 150 ft
Pressure Rating 5,000 PSI
Inlet 3/8" NPT-M
Outlet 3/8" NPT-F
Max. Temp 185°F
FEATURES / BENEFITS
• Direct hand-crank rewind with locking pin
• Stainless steel Frame
• Durable powdercoated finish (reel)
• 100' Capacity for 3/8"Hose
Industrial Hose Reel
PARTS LIST
General Pump
is a member of
the Interpump Group Ref 301061 Rev A
04-21
• 150'Capacity for 1/4"hose
• 5,000 PSI
• 3/8"NPT-M inlet (1/2"NPT-M adapter included)
• 3/8" NPT-F outlet
Item # Part # Description QTY
1 2103152 FRAME KIT, HAND CARRY,
SS 1
2 2540011 ASSY, FLANGE, 100’ 1
3 2540001 PIN, LOCK 1
4 2720004 SPRING 1
5 2200032 RING 1
6 2203403 WASHER 2
7 2530025 BUSHING 2
8 2720010 SPRING 1
9 2203416 WASHER, SWIVEL 1
10 2103130 SWIVEL, HOSE REEL,
FORGED 1
11 100056 HANDLE KIT 1
12 2660385 PLUG 1
13 2702005 GUARD, HOSE 1
14 2530112 FITTING, 1/2NPT-M
X3/8NPTF 1
15 2400004 DECAL, GP 1
16 2200166 BOLT, M10X25, SS 4
17 2203017 NUT, M10, NYLOK, SST 4
18 2203413 WASHER, FLAT, M10 8
19 2103150 ARM, ASSY 100’ 1
2100278 Swivel Repair Kit for DHRHC50100

DIMENSIONS
GENERAL PUMP • 1174 Northland Drive • Mendota Heights, MN 55120
Phone: [phone] • Fax: [phone] • email: [email protected] • www.generalpump.com
Ref 301061 Rev A
04-21
DHRHC50100
GENERAL PUMP A member of the Interpump Group
Industrial Hose Reel
SAFTY PRECAUTIONS
WARNING!
Exposure of skin directly to
pressurized air or fluids could
result in severe bodily injury!
1. Make sure incoming pressure does not exceed the rated pressure.
2. Use proper eye protection when assembling and using the hose reel.
3. Assemble the hose reel on a clean workbench free of debris and moisture.
4. Keep children away from work area.
OPTIONAL ACCESSORIES
**NOTE: 2100012 is an optional hardware kit.
• Glycerin Filled Gauge
• Full Flow Ball Valve
• 5000 PSI
• 1/4"NPT-F Inlet
• 1/4"NPT-F Outlet
1. Clamp the hardware kit to the hose reel handle with the two M8 bolts.
2. Use thread sealant (not provided) and the supplied fittings/adapters as needed to connect an inlet hose (not provided) to the hardware kit inlet.
3. Use thread sealant on the hose reel pigtail and connect to the hardware kit outlet.
4. The hardware kit may be used to turn flow on or off to the hose reel and to monitor pressure and flow in the hose reel.
5. Two different length U-bolts are supplied with the hardware kit for attaching the hose reel as needed to a truck or cart.
WARNING: This product can expose you to chemicals, including
lead, which is known to the state of California to cause cancer and
birth defects or other reproductive harm. For more information, go to
www.prop65warnings.ca.gov.
INLET 3/8" NPT
OUTLET 3/8" NPT-F
(to hose)