2
1. Introduction
2. Key Features
3. Technical Specication
The GSFPFM is a standard SFP Optical Module. It uses two single mode optical bres with the speed rate
reaching up to 1.2Gbps and transmission distance up to 20Km.
• Use SFP Packaging Form, LC Connector, Support SFF8472 Standard
• Support Hot Plug
• Use 1310 FP Laser and PIN-TIA
• The Data Transmission Distance of a Single Mode Optical Fibre can be up to 20Km
• Data Input and Output Ports comply with the Low Voltage Emitter Coupled Logic (LVPECL) Standard
• Low Electromagnetic Interference to the Environment, Strong ESD Protection
• Meet IEC-60825 Laser Safety Standard
• Meet RoHS Standard
Model Number GSFPFM
Power Supply The Host Power Supply
Voltage Range DC3.15V ~ 3.45V
Consumption 1W
Optical Wave Length 1310nm
Emission Light Power -8 ~ -3dBm
Receiver Sensitivity -24dBm
Optical Fibre Type Single Mode 9/125um
Optical Fibre Port LC
Transmission Distance Single Mode 20Km
ESD 1a Contact Discharge 3 Level
1b Air Discharge 3 Level
Per: IEC61000-4-2
Working Temperature 0°C ~ 70°C
Storage Temperature -40°C ~ 70°C
Humidity 0~95% (Non-Condensing)
MTBF >30000h
Dimensions (L x W x H) 55.4 x 13.7 x 7 mm
Weight 17g
*Design and Specications are subject to change without notice.