Genie FR01W User manual

Please read these instructions carefully before operating the unit
and keep for further reference.
User Manual
Facial Recognition Reader with
7” LCD Screen and 2x 2MP
Cameras
FR01W

2/ 34
INDEX
Chapter 1 introduction........................................................................................................................... 5
1.1 Apparatus shape.................................................................................................................. 5
1.2 Model ........................................................................................................................................ 5
1.3 Application........................................................................................................................... 5
1.4 Feature.................................................................................................................................... 5
1.5 Specification ...................................................................................................................... 6
1.6 Dimensions ............................................................................................................................. 9
Chapter 2 Installation........................................................................................................................... 10
2.1 interface description ..................................................................................................10
2.2 Installation steps.........................................................................................................11
Chapter 3 wiring ................................................................................................................................... 16
3.1 Material / Tool List ....................................................................................................16
3.2 Interface description ..................................................................................................17
3.3 Magnetic lock wiring ....................................................................................................17
3.3.1 system installation diagram.........................................................................17
3.3.2 Magnetic lock and exit button wiring diagram..................................18
3.3.3 Magnetic Lock mechanical switch wiring diagram .............................19
3.4 Automatic induction door wiring ...........................................................................20
3.4.1 Automatic induction door system installation diagram................20
3.4.2 Automatic door sensor head switch wiring diagram.........................21

3/ 34
3.5 Precautions.........................................................................................................................21
Chapter 4 System setting..................................................................................................................25
4.1 NF4027P setting................................................................................................................25
4.2 Sphinx4.4 setting ...........................................................................................................25
Chapter 5 Registered .........................................................................................................................29
Chapter 6 Test...................................................................................................................................... 34

NF4027P Facial recognition user manual V1.00
4/ 34

5/ 34
Chapter 1 introduction
1.1 Apparatus shape
1.2 Model
Black/Silver: FR01W
1.3 Application
It is suitable for office areas, hotels, access gates, office buildings, schools, shopping malls,
shops, communities, public services and management projects, etc.
1.4 Feature
Support for external HDMI large screen (only supports vertical screen);
Dynamic dual-camera anti-counterfeiting, completely solve the deception of various
photos on various carriers;
Night infrared, RGB double fill light;

6/ 34
Support external 4G network;
Support external QR code scanner and ID card reader (currently only supports new
Chinese and new ID card reader DKQ-A16D);
Support serial port, Wiegand 26, 34 output;
dynamic face detection and tracking recognition algorithm based on video stream;
Supports local storage of mega-warehouses for devices, (a) Cloud platform devices
support simultaneous storage of 50,000 face photos (less than 400KB), 1 million
identification records (0.45KB), 20,000 live snapshots (b) LAN device Supports
simultaneous storage of 20,000 face photos (photos calculated by 100KB) and 1 million
identification records (including the latest 10,000 live capture photos);
When the face database is 3000, and the misrecognition rate is 3/10000, the 1:N
recognition accuracy rate is 99.7%;
Fast recognition speed, (a) face tracking and detection takes about 20ms (b) face feature
extraction takes about 200ms (c) living body detection face time takes 0.2ms (1000
people library, multiple recognition Average), 0.5ms (10,000 people, multiple times to
average);
Support for stranger detection, stranger level configurable;
Support for live photo preservation when face recognition or stranger detection;
Support public network and LAN deployment methods;
Support HTTP interface interfacing;
Support screen display content configuration;
Support for recognition distance configurations.
1.5 Specification
FR01W - Facial recognition integrated terminal

7/ 34
Model
FR01W
Screen
size
7", full viewing angle, 170°IPS LCD screen
resolution
1024×600
Camera
type
RGB and infrared
RGB and infrared
serial number
02F8、02FA（discontinued）
01F8、01FA
resolution
200WPixel
200WPixel
aperture
F2.4
F2.1
focal length
5.75mm
4.43mm
White balance
auto
auto
Wide dynamic
support
support
Vertical wide
angle
Horizontal wide
angle
Core
parameter
CPU
4 cores, 1.8 GHz
storage
Memory 2G, storage 8G
Accessories
Fill light
Infrared, LED fill light
Card reader
module
U card reader (only supported by NF4027P-U)
Network
module
Support wired, wireless (2.4GWi-Fi), wireless (4G network card,
USB external)
interface
Audio
1 channel audio output (line out)
video
HDMI2.0 Type-A interface 1
USB interface
USB2.0 Type-A interface 1
Serial
communication
interface
RS232 serial port, 2.5mm terminal block 4P
Relay output
2.5mm terminal block 3P
Wiegand
2.5mm terminal block 2P, support Wiegand 26, 34

8/ 34
interface
Reset interface
RESET hole on the back of the device
Wired network
interface
2.5mm terminal block 4P
function
Face Detection
Supporting detection and tracking of 5 people at the same time
1:N face
recognition
Under the condition of 3% misidentification rate, the recognition
accuracy rate is 99.7%.
Stranger
detection
support
Recognition
distance
configuration
support
UI interface
configuration
support
Remote upgrade
of equipment
support
Deployment
method
Support public network, LAN use
Function
parameter
Protection level
IP42
power supply
DC12V（±10%）
Operating
temperature
-10℃～60℃
Working
humidity
10%～90 %
Power
consumption
10W MAX
Installation
method
Wall bracket installation, gate bracket installation
Equipment size
23cm*11.6cm*2cm
weight
≈500g

9/ 34
1.6 Dimensions

10/ 34
Chapter 2 Installation
2.1 interface description
Screen
Swipe area
LED light
RGB Camera
Infrared Camera
infrared light
RESET
HDMI
SN
Bracket slot
Screw hole
USB
Heat sink
WD0
WD1
232 TXD
232 RXD
+12V
GND
RJ45-1
RJ45-2
RJ45-3
RJ45-6
GND
NC
NO
COM
COM PORT
WG_OUT
Lock
POWER
NETWORK
Positive and
negative power
supply. If they
are reversed,
the device will
not start. Power
adapter requires
12-16V, 2A
cable. From left to right
are:
TX+, orange white line
TX-, orange line
RX+, green white wire
RX-, green line
Serial signal
output. serial
communication
TXD, RXD
Wiegand 26
signal output.
Wiegand
signal 0 output,
1 output
Relay switch
signal output.
From left to right:
NC, NO, COM.

11/ 34
2.2 Installation steps
1. wiring instructions (take the power line as an example, other wiring and analogizing
later)
a) Strip the wire (using tools such as scissors) to expose the wire as shown.
b) Press the orange button at each connector on the green bar to insert the wire end into the
hole, then loosen the orange button to secure the wire as shown.
Caution：
If the positive and negative poles of the power cord are reversed, the device
will not start; if the positive and negative poles are connected correctly,

12/ 34
the device will start normally; the device power adapter requires 12-16V,
2A.
Be careful not to short the positive and negative wiring, otherwise the device will not
start.
If you do not need to install the device on the wall, you can directly refer to step 6. After
the device is powered on, start using the device.
2. Place the hole paper on the wall, keep the horizontal line parallel to the ground when
pasting, and the red line is 1.4m away from the ground.
3. Drill 3 screw holes in the wall according to the instructions of the hole paper, and open
1-2 threading holes according to the wiring requirements, and insert the rubber plugs in
the accessories into the holes.

13/ 34
4. According to the mounting position of the bracket, insert the green plug of the
connected cable out of the outlet hole. If you need to reset the cable and HDMI cable,
please pass it out from the outlet hole at this step.
5. Move the bracket so that the three holes on the bracket align with the holes on the wall,
and then secure the bracket to the wall with the self-tapping screws in the accessory.

14/ 34
6. Insert the green interface into the connector on the back of the device。
7. Screw the countersunk screw into the bracket for two turns, then align the slot under the
device with the hook under the bracket. Use a hexagon socket tool or a hex driver to
tighten the countersunk screw in the direction of the arrow. The installation is complete.。

15/ 34

16/ 34
Chapter 3 wiring
3.1 Material / Tool List
NO.
Material/Tool
Quantity
Note
1
NF4000 Facial recognition
instrument + accessories
1
Self-contained accessories include: 12V
adapter, wall mount bracket, expansion
tube, self-tapping screws, hex wrench,
hexagon socket screws, etc.
2
Exit button (optional)
1
Use to exit
3
Electromagnetic lock (optional)
1
When the power is off, the door is opened,
and when the power is turned on, the door
is locked
4
Access control power supply
(optional)
1
Power supply to the electromagnetic lock,
can be powered to the Keyking host at the
same time
5
Network cable (optional, device
supports Wi-Fi)
Several
Used to lay out Ethernet and other
remaining traces
6
Cable clamp, network tester,
diagonal pliers, electrical tape,
wire buckle
Several
Used to lay out Ethernet and other
remaining traces
7
Drilling tool
Several
Used to install equipment, wiring

17/ 34
3.2 Interface description
3.3 Magnetic lock wiring
3.3.1 system installation diagram

18/ 34
3.3.2 Magnetic lock and exit button wiring diagram

19/ 34
3.3.3 Magnetic Lock mechanical switch wiring diagram