Genie Union Community UBio-X Slim User manual

Copyright 2000 By Union Community Co., LTD.
UBio-X Slim User Guide
Version Eng-1.3
Distributed by

UBio-X Slim User Guide 2
<Revison History>
Version
Date
Description
Firmware Version
0.1
2019-03-15
Initial Release
0.2
2019-03-25
Modified some words.
0.3
2019-04-25
Modified the menu titles according to terminal’s
menu modes.
0.4
2019-05-17
Added the explanation of USB user and log
download.
0.5
2019-06-05
Modified the explanation of USB and added the
feature of motor lock.
0.6
2019-06-21
Added the voice message of the password.
0.7
2019-06-28
Added the default value of the information in menu.
0.8
2019-07-10
-Added the explanation of auto TNA, encryption,
voice and language.
-Added the feature of factory reset.
0.9
2019-08-09
Add the comment of image display about
authentication result depending on the
authentication type. (pg.26)
1.0
2019-09-23
Added the comment of camera flash. (pg.27)
1.1
2019-10-11
Added the explanation of log download and USB
unmount.
1.2
2019-10-30
Added the feature to use the user’s photo.
1.3
2019-12-06
Added the method to update App, Resource, Kernel
and Rootfs file at one time.

UBio-X Slim User Guide 3
UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,
Seoul, Korea (zip code : 05836)
Tel : [phone] , Fax : [phone],
E-Mail :[e-mail]; http://www.unioncomm.co.kr
<Glossary>
Admin, Administrator
-A user who can enter into the terminal menu mode, he/she can register/modify/delete terminal
users and change the operating environment by changing settings.
-If there is no administrator for a terminal, anyone can change the settings. In this regard, it is
recommended to register at least one administrator.
-Caution is required with registration and operation because an administrator has the right to
change critical environmental settings of the terminal.
1 to 1 Verification
-Authenticate the user’s fingerprint after inserting his user ID or swiping his registered Card.
-It is called 1 to 1 Verification because only the fingerprint registered in the user’s ID or card is
used for comparison.
1 to N Identification
-The terminal performs matches against multiple fingerprints (templates) based solely on
fingerprint information.
-Without the user’s ID or card, the user’s fingerprint is compared to fingerprints previously
registered.
Authentication level
-Depending on the fingerprint match rate, it is displayed from 1 to 9. Authentication is successful
only if the match rate is higher than the set level.
-The higher the Authentication level, the higher the security. However, it requires a relatively high
match rate, so Authentication is vulnerable to failure.
-1:1 Level: Authentication level used for 1:1 verification
-1:N Level: Authentication level used for 1:N identification
LFD (Live Finger Detection)
- This function allows the input of only real fingerprints and blocks the input of imitation fingerprints
produced using rubber, paper, film, and silicone.

UBio-X Slim User Guide 4
Contents
<Revison History>....................................................................................................2
<Glossary>................................................................................................................3
1. Before use.............................................................................................................5
1.1. Safety Precautions.................................................................................................6
1.2. Specific names of the terminal .............................................................................6
1.3. LCD Display Composition .....................................................................................7
1.3.1 Status Icons..........................................................................................................8
1.4. Voice and Beep sounds in operation....................................................................9
1.4.1 Beep or Sound effect in operation......................................................................9
1.5. Proper fingerprint registration and input methods..............................................9
2. Product introduction ..........................................................................................10
2.1. Product characteristics .......................................................................................10
2.2. Product components ...........................................................................................11
2.2.1. Standalone use (Access)..............................................................................11
2.2.2. Connected with Server (Access, Attendance) ...............................................12
2.3. Product specification...........................................................................................13
3. Environment setting...........................................................................................14
3.1. Checks before setting the environment .............................................................14
3.1.1. Entering the menu by Administrator ..............................................................14
3.2. Menu composition ...............................................................................................15
3.3. User.......................................................................................................................17
3.3.1. Register ........................................................................................................18
3.3.2. Modify...........................................................................................................19
3.3.3. Delete...........................................................................................................20
3.3.4. List................................................................................................................21
3.3.5. Card Only .....................................................................................................21
3.4. Auth.......................................................................................................................22
3.4.1. Normal..........................................................................................................22
3.4.2. TnA...............................................................................................................23
3.4.3. Timezone......................................................................................................24
3.4.4. Log ...............................................................................................................24
3.5. System..................................................................................................................25
3.5.1. Sensor..........................................................................................................25
3.5.2. Card .............................................................................................................26
3.5.3. Door .............................................................................................................27
3.5.4 RS485 ...........................................................................................................28
3.5.5 Option............................................................................................................28
3.5.6 Information ....................................................................................................29
3.6. Network.................................................................................................................29
3.6.1. Normal..........................................................................................................30
3.6.2. TCP/IP..........................................................................................................31
3.7. UI...........................................................................................................................31
3.7.1. Sound...........................................................................................................32
3.7.2. Display..........................................................................................................33
3.8. USB.......................................................................................................................33
3.8.1. User Download .............................................................................................34
3.8.2. User Upload..................................................................................................34
3.8.3. Log Download...............................................................................................34
3.8.4. F/W Update ..................................................................................................35

UBio-X Slim User Guide 5
3.9. Initialize.................................................................................................................35
4. How to use terminal ...........................................................................................36
4.1. How to open the door ..........................................................................................36
4.2. How to punch for TnA..........................................................................................38

UBio-X Slim User Guide 6
1.1. Safety Precautions
Warning
Handling with wet hands or
allowing liquid to flow into it
is prohibited.
-> It may cause an
electric shock or damage.
Do not place a fire source
near the terminal.
-> It may cause a fire.
Do not disassemble, repair,
or modify the terminal at
discretion.
-> It may cause an electric
shock, fire or damage.
Keep out of reach of
children.
-> It may cause an
accident or damage.
- If the above warning is ignored, it may result in death or serious injury.
Cautions
Keep away from direct
sunlight
-> It may cause
deformation or color
change.
Avoid high humidity or
dust
-> The terminal may be
damaged.
Avoid using water, benzene,
thinner, or alcohol for
cleaning
-> It may cause an electric
shock or fire.
Do not place a magnet
close to the terminal.
-> The terminal may
break down or
malfunction.
Do not contaminate the
fingerprint input area.
-> Fingerprints may not be
well recognized.
Avoid using insecticide or
flammable spray near the
terminal.
-> It may result in
deformation or color
change.
Avoid impacts or using sharp
objects on the terminal.
-> The terminal may be
damaged and broken.
Avoid severe temperature
changes
-> The terminal may be
broken.
- If the above cautions are ignored, it may result in property loss or human injury.
※Under no circumstances will UNION COMMUNITY be responsible for accidents or damages
caused by inappropriate use of the product without referring to the user manual.
1. Before use

UBio-X Slim User Guide 7
Daylighting sensor
Card Sensing Area
Fingerprint sensor
Camera
Touch LCD
Camera Flash
1.2. Specific names of the terminal

UBio-X Slim User Guide 8
1.3.1 Status Icons
Network Status
: Standalone Mode (Non-networking Mode)
: Connected to the server (On line)
: Disconnected to the server (Off line)
Fire Alarm
None
: Normal Status
: Fire Alarm is activated.
(by the Fire switch or by Server program)
Tamper
None
: Normal Status
: Abnormal Status (Tamper switch is activated.)
Door Status
: Door is closed.
: Door is opened.
: Door is opened abnormally.
: Door is not used.
: Door is forcedly open.
Time & Date
Status Icons
Menu Button
ID Input Button
1.3. LCD Display Composition

UBio-X Slim User Guide 9
1.4. Voice and Beep sounds in operation
Operation type
Voice sound
Success to authorize
You are authorized
Fail to authorize
Please try again
Waiting for FP input
Please place your finger.
Waiting for card input
Please place your card.
When entering ID
Please insert your ID.
When entering the
password
Please enter your ID.
1.4.1 Beep or Sound effect in operation
Pi-pick +
error tone
Notice for fail
When the authorization was failed (at Voice off)
Peek +
Ding-dong
Notice for
Success
When the authorization was successful (at Voice off)
1.5. Proper fingerprint registration and input methods
Correct fingerprint registration methods
Place your index finger on the window just as you do with a finger stamp.
Do not use the tip of the finger.
Make sure the center of your finger touches the window.
Use your index finger if possible, it is the easiest for orientation and guarantees a stable input
method.
Check if your fingerprint is unclear or damaged.
It is tricky to recognize fingerprints on dry, wet, unclear, or injured fingers. Use another finger
in this case.

UBio-X Slim User Guide 10
Be aware of certain fingerprint conditions
Depending on the user’s fingerprint condition, some fingerprints may not be used or may cause
an inconvenience.
If the fingerprint is damaged or very unclear, then it cannot be recognized. Please use the
RF Card instead in this case.
When a finger is dry, breathe on the finger for smooth operation.
For kids, it may be tricky or impossible to use the terminal because their fingerprints are
too small or very unclear. It is recommended to register their fingerprints every six months.
For the elderly, it may not be possible to register their fingerprints if there are too many
fine lines on the fingerprints.
It is recommended that you register more than 2 fingerprints.
In order to increase the fingerprint authentication rate, it is recommended to use six of the
ten fingers as illustrated above. (Both thumbs, forefingers, middle fingers).
2. Product introduction
2.1. Product characteristics
Multi-Modal product with which the user can use fingerprint, Card or Password
authorization functions together.
Built-in Camera Flash can detect the real human face or a picture.

UBio-X Slim User Guide 11
Camera Flash can be activated automatically by the Daylighting sensor.
RF Card (125 kHz)
Smart Card (13.56MHz)
This is Access Control System can be cooperated with Server Database by TCP/IP or
Wi-Fi (optional).
Various registration and authorization methods
Fingerprint
Fingerprint registration
Fingerprint authorization
Card
Card registration
Card authorization
Password
Password registration
Password authorization
‘OR’ Combination
Authentication
To be authorized successfully, one method among the registered should be
authorized.
‘AND’ Combination
Authentication
To be authorized successfully, all registered Auth methods should be
authorized.
2.2. Product components
2.2.1. Standalone use (Access)
DC12V Adapter
Electric lock
(Lock+, Lock-, Monitor)

UBio-X Slim User Guide 12
2.2.2. Connected with Server (Access, Attendance)
TCP/IP
Attendance
management program
Internet /
WAN / LAN
TCP/IP
Fingerprint authorization
server
TCP/IP
Remote management
program
(user and terminal setting
management)
TCP/IP
TCP/IP
TCP/IP

UBio-X Slim User Guide 13
2.3. Product specification
Types
SPEC
Remarks
CPU
1.4GHz Quad Core CPU
LCD
4.95 inches Touch LCD(480*854)
Memory
eMMc 8G Bytes Flash
2GByte RAM
External USB support
Backup data / Upgrade firmware
Camera
Still Capture Image Color (1600x1200)
Camera Flash Sensor
Daylighting Flash Control
Capacity
500,000 Users / 500,000 Cards (Server:
200,000)
10,000,000 Logs / 50,000 Image logs
100,000 Users
/ In case of more
than 100,000
users, the booting
time takes more
than 3 mins.
Temperature /
Humidity
-20 ~60℃ /
Lower than 90% RH
AC / DC Adapter
INPUT : Universal AC100 ~ 250V
OUTPUT : DC 12V ~ 24V 3.5A
UL, CSA, CE Approved
Lock Control
EM, Strike, Motor Lock, Auto Door
I/O
4 In (1 Exit, 3 Monitors)
2 Out (Lock 1, Lock 2)
Communication Port
TCP/IP (10/100Mbps)
Communication
with Auth Server
RS-232
Ticket Printer
RS-485
Communication
with Controller
Wiegand Input / Output
Communication
with Card reader or
Controller
Card Reader
125KHz RF / 13.56MHz Smart
HID 125K Prox card (Optional)
HID iClass card (Optional)
Option
Dimension (mm)
80 X 195.6 X 23.5(Normal) / 54.67(Max)
Including Bracket

UBio-X Slim User Guide 14
3. Environment setting
3.1. Checks before setting the environment
3.1.1. Entering the menu by Administrator
Terminal users include general users and administrators. General users are only allowed to open the door
while the administrator can use the Administrator menu to control the door as well as the terminal’s
functions.
1. To enter the menu, touch the [MENU] button at the lower of the
touch pad.
2. Input the administrator ID and follow the authentication
process. The Administrator menu will be displayed. Because no
users have yet been registered, any user can enter the
Administrator menu. At least, one administrator should be
registered for security purposes.
1. If no administrator was designated and only general
users were registered in network mode, all users will be
allowed to enter the management menu.
2. If 1:N authentication is used, an administrator with a
registered fingerprint can enter the administrator menu
using fingerprint authentication without entering his ID.

UBio-X Slim User Guide 15
3.2. Menu composition
The Administrator menu has seven submenus as shown below.
The following describes each sub menu:
1. User
1. Register
2. Modify
3. Delete
4. List
5. Card Only
2. Auth
1. Normal
▶1:1 Auth Level (Default : 5)
▶1:N Auth Level (Default : 8)
▶Auth Type (Default : Use Identify (1:N Auth))
▶Auth Order
(Default : Terminal  Server)
2. TnA
▶TnA Type (Default : Not Use)
▶Auto TnA (Default : Not Use)
▶TnA only (Default : Not Use)
3. Timezone
4. Log

UBio-X Slim User Guide 16
3. System
1. Sensor
▶Capture Timeout (Default : 5 seconds)
▶LFD Accuracy (Default : Not Use)
▶Camera Usage (Default : Not Use)
▶Camera Flash (Default: 1)
2. Card
▶Card Type (Default : Not Use)
▶Wiegand Type (Default : Not Use)
▶Send Data (Default : Card Number)
▶Site Code
3. Door
▶Door Selection (Default : Door1)
▶Function (Default : Door)
▶Result signal (Default : Success)
▶Lock Open Time (Default : 5 seconds)
▶Door Warn Time (Default : 20 seconds)
▶Door Control (Default : Normal Close)
4. RS485
▶RS485 Type (Default : Not Use)
▶RS485 ID (Default : 0)
5. Option
▶Number of Template (Default : 2)
▶ID length (Default : 4)
▶Log Save (Default : Yes)
▶Display User Name (Default : Yes)
▶Duration Result (Default : 1 second)
▶Tamper Alarm (Default : Mute)
6. Information
▶Terminal ID (Default : 1)
▶Number of User / Template (0/0)
▶Number of Admin. (0)
▶TnA Mode (Not Use)
▶Card Type (Not Use)
▶Network Type (Ethernet)
▶IP Address (192.168.0.3)
▶Version
(Firmware – Kernel version / File system version)
4. Network
1. Normal
▶Type (Default : Ethernet)
▶Terminal ID (Default : 1)
▶Server Address (Default : 192.168.0.2)
▶Port Number (Default : 7332)
▶Encrypt (Default : DES)
▶Ping Period (Default : 10 seconds)
2. TCP/IP
▶DHCP (Default : Not Use)
▶IP Address (Default : 192.168.0.3)
▶Subnet Mask (Default : 255.255.255.0)
▶Default Gateway (Default : 192.168.0.1)
▶Primary DNS
5. UI
1. Sound
▶Sound Type (Default : Effect Only)
▶Volume (Default : 1)

UBio-X Slim User Guide 17
2. Display
▶Language (Default : English)
▶LCD Brightness (Default : 3)
▶Main Display (Default : Analog Clock)
▶Waiting Time (Default : 3 Min)
▶Screen Saver
▶Date (Default : System Date)
▶Time (Default : System Time)
▶User Picture (Default : No)
6. USB
1. User Download
2. User Upload
3. Log Download
4. F/W Update
7. Initialize
1. Delete User
2. Delete Log
3. Init Option
4. Restart
3.3. User
When you select the [User] at the main menu, the following window appears.
The administrator can register, delete, modify, and search for the
user by using the [User] menu.

UBio-X Slim User Guide 18
The first registered user from terminal will be an administrator
automatically.
3.3.1. Register
The maximum number of users to enroll to the terminal are 200,000 templates for FP users but Card
users or PW user can be enrolled up to 500,000 users. For example, when 10,000 users have 200,000
FP templates totally stored on the terminal, 490,000 users can register with the Card or PW additionally.
1. To register a new user to the terminal, select [Menu]  [User] 
[Register] in order.
2. Insert the User ID you want to register after pressing the button
“Input ID”.
3. When selecting the button [Admin] from [Permission], this user’s
authority will be changed. Basically, there are two buttons to
select the user’s privilege between administrator and normal user.
To finish registration of user from the terminal, at least more than one Auth method should be registered
among ‘FP’, ‘Card’, and ‘PW’. And then the user will be registered when pressing the button [SAVE] after
selecting ‘Auth combination’.
Administrator and normal user have the different authority as below.
-User : Only control the access door.
-Admin : Access door + Enter the menu mode of terminal

UBio-X Slim User Guide 19
3.3.2. Modify
When modifying the registered user from the terminal, ‘Group’, ‘Permission’, ‘FP’, ‘Card’, ‘PW’, ‘Auth
combination’ can be modified freely except ‘User ID’ because it is an unique identifying number so that
it couldn’t be modified after registration. And also it is possible on Standalone mode which the network
type is ‘Not Use’. So you have to modify the registered user from the Server software on Network mode.
1. To modify the registered user from the terminal, select [Menu] 
[User]  [Modify] in order. And then the user information will be
shown as left picture after inserting the User ID to modify.
2. To finish modification of user info from the terminal, press the
button [SAVE] after modifying the user info.

UBio-X Slim User Guide 20
3.3.3. Delete
The user ID to delete and select [Yes] button.
Select [Close] button to delete and go back.
If inserting the invalid user ID or unregistered user ID, the
error message is displayed.
If inserting the valid ID or registered ID, the message is
displayed as below.